Wall AM505-200N 1 watt surface mount dc/dc converter single output Datasheet

AM SERIES
1 Watt
Surface Mount DC/DC Converter
Single Output
Rev B
FEATURES
•
•
•
•
•
• Small Footprint
• High Power Density
• Industry Standard Pinout
• Cooling by Free Air Convention
Short Circuit Protection
SMT Package
1,000VDC Isolation
MTBF > 1 Million Hours
Efficiency up to 80%
RoHS Compliant
APPLICATIONS
• High Speed Pick Machine
Operation
• Place Machine Operation
• Low Power Applications
Size: 0.5in x 0.30in x 0.25in
(12.7 x 7.6 x 6.25mm)
DESCRIPTION
The AM series of DC DC converters provides up to 1 watt of
output power in a compact 0.5” x 0.30” x 0.25” frame. This series
consists of single output models with outputs ranging from
3.3~15VDC. Each model has high power density as well as
industry standard pinout. This series is useful in high speed pick
and place machine operation and other low power applications.
Models are RoHS compliant and have high efficiency up to 80%.
MODEL SELECTION TABLE
Model Number
AM503-303N
AM505-200N
AM509-110N
AM512-84N
AM515-67N
AM1203-303N
AM1205-200N
AM1209-110N
AM1212-84N
AM1215-67N
Input Voltage
5VDC
(4.5-5.5VDC)
5VDC
(4.5-5.5VDC)
5VDC
(4.5-5.5VDC)
5VDC
(4.5-5.5VDC)
5VDC
(4.5-5.5VDC)
12VDC
(10.8~13.2VDC)
12VDC
(10.8~13.2VDC)
12VDC
(10.8~13.2VDC)
12VDC
(10.8~13.2VDC)
12VDC
(10.8~13.2VDC)
Load Regulation(1)
Efficiency
303mA
15% Typ.
65%
5VDC
200mA
15% Max.
70%
9VDC
110mA
9% Max.
75%
12VDC
84mA
7.5% Max.
78%
15VDC
67mA
7% Max.
80%
3.3VDC
303mA
15% Typ.
65%
5VDC
200mA
15% Max.
70%
9VDC
110mA
9% Max.
75%
12VDC
84mA
7.5% Max.
78%
15VDC
67mA
7% Max.
80%
Output Voltage
Output Current
3.3VDC
Ripple & Noise
100mVp-p
100mVp-p
Output Power
1W
1W
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
INPUT SPECIFICATIONS
Input Voltage Range
Input Filter
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Tolerance
Line Regulation
Load Regulation
Output Power
Output Current
Ripple & Noise
Transient Response Setting Time
PROTECTION
Short Circuit Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Case Temperature
Humidity
Cooling
MTBF
1/9/2018
Min
5
Typ
12
Capacitor
See Table
±5
1.2
See Table
See Table
See Table
100
350
For 1% of Vin
DC to 20MHz Bandwidth
50% load step change
Short Term
1
-40
Non-Condensing
Max
+85
95
Free Air Convection
3500000
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Unit
VDC
%
%
mVp-p
us
Sec.
ºC
%
Hours
Page 1 of 4
AM SERIES
1 Watt
Surface Mount DC/DC Converter
Single Output
Rev B
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
GENERAL SPECIFICATIONS
Efficiency
Typ
Max
Unit
See Table
Switching Frequency
Full Load, Nominal Input
Isolation Resistance
PHYSICAL SPECIFICATIONS
Weight
500VDC
100
KHz
1000
MΩ
0.04oz (1g) Typ.
0.5in x 0.3in x 0.25in
(12.7mm x 7.6mm x 6.25mm)
DAP
Dimensions (L x W x H)
Case Material
NOTES
(1)
(2)
Load regulation measured 10%-100% F.L.
Specifications subject to change without notice.
DERATING CURVES
Temperature Derating
1/9/2018
Tolerance Envelope Graph
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 4
AM SERIES
1 Watt
Surface Mount DC/DC Converter
Single Output
Rev B
RECOMMENDED TEST CIRCUIT
MECHANICAL DRAWINGS
PIN Connection
PIN
Single
1/9/2018
1
-Vin
3
+Vin
7
-Vout
8
+Vout
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
14
NC
Page 3 of 4
Rev B
AM SERIES
1 Watt
Surface Mount DC/DC Converter
Single Output
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
1/9/2018
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 4
Similar pages