Click on Series name for product info on aimtec.com Series AMEL5-AZ 5 Watt | AC-DC / DC-DC Converter FEATURES: I/O Isolation 3000VAC Operating Temp: -40 oC to +95 oC Input: 90-305VAC, 47-440Hz, or 130-430VDC Over load, Over Voltage, Short Circuit Protection RoHS compliant Energy Star compliant Efficiency up to 76% Soft start Models Single output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Temperature range (ºC) Output Voltage (V) Output Current max (A) Maximum capacitive Load (µF) Efficiency (%) 115 VAC 230 VAC 277 VAC AMEL5-3.3SAZ 90-305/47-440 130-430 -40 to +95 3.3 1. 5 2200 71 71 69 AMEL5-5SAZ 90-305/47-440 130-430 -40 to +95 5 1 1100 72 73 72 AMEL5-12SAZ 90-305/47-440 130-430 -40 to +95 12 0.42 680 75 76 76 AMEL5-15SAZ 90-305/47-440 130-430 -40 to +95 15 0.333 330 75 75 73 AMEL5-24SAZ 90-305/47-440 130-430 -40 to +95 24 0.21 220 75 76 75 Note: 1. Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL5-5SAZ-ST); 2. Optional version with incorporated filter for Earth to Ground connection can be ordered by adding “G” to the model suffix (ex. AMEL5-5SGAZ). Input Specifications Parameters Current (full load) Inrush current <2ms (cold start) Leakage current External fuse Input dissipation Start-up time Conditions Typical 115 VAC 230 VAC 277 VAC 115 VAC 230 VAC 277 VAC 1.5 ≦0.2 150 Recommended slow blow type (110/230/277 VAC) 115 VAC/ Full Load Maximum 120 80 70 15 30 40 0.2 Units mA mA mA A A A mA A W ms Output Specifications Parameters Conditions Typical Maximum Voltage accuracy Line regulation Load regulation Transient recovery time Transient response deviation ±2 ±1 0-100% load ±1 200 25% load step ±2 3.3/5V models 75 Ripple & Noise* 12/15V models 100 24V models 150 Hold-up time 5 *Ripple and Noise are measured at 20MHz bandwidth by using a 0.1µF (M/C) and 47µF (E/C) parallel capacitor. Units % % % µs % of Vout mV p-p mV p-p mV p-p ms Isolation Specifications Parameters Tested I/O voltage Isolation Resistance www.aimtec.com F 052e R8.O Conditions Typical 60 sec >1000 Tel: +1 514 620 2722 1 of 5 Rated Units 3000 VAC MΩ Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL5-AZ 5 Watt | AC-DC / DC-DC Converter General Specifications Parameters Conditions Typical Maximum Units Switching frequency Over load protection Over voltage protection Short circuit protection Operating temperature Storage temperature Maximum case temperature Temperature coefficient Cooling Humidity Case material Weight Dimensions (L x W x H) 66 KHz Foldback 130 % Zener Diode Clamp Auto recovery oC With derating over 60ºC, see chart Refer to model application oC -40 to +95 oC 100 0.02 % / oC Free air convection Non condensing 20 ~ 95 % RH Plastic (flammability to UL 94V-0) 30 g 51.50 x 28.00 x 17.80mm (2.03 x 1.10 x 0.70inches) > 400,000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load MTBF > 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Environment Approval Test Shock Vibrations Parameters Wave form Acceleration amplitude Bump duration Converter operation Number of bumps Test mode Displacement Acceleration Converter operation Conditions Half sine wave 5gn 30ms Before and after test, body mounted (on chassis) 18 (3 in each direction for every axis) Sweep sine, 10-100Hz, speed 0.05Hz/s 1mm 3g, 3 loops 30min one cycle, 3h total, every axis tested Before and after test, body mounted (on chassis) Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 052e R8.O cULus for all models CE, CB (not including suffix “GAZ” models) Information technology Equipment IEC\EN\UL 60950-1 Information technology Equipment EN 60950-1:2006+A11:2009 EMI - Conducted and radiated emission EN55022, class B Harmonic Current Emissions IEC/EN 61000-3-2, Class A Voltage fluctuations and flicker IEC/EN 61000-3-3, (EN60555-3) Electrostatic Discharge Immunity IEC 61000-4-2 Air level 3, Contact level 2 RF, Electromagnetic Field Immunity IEC 61000-4-3 Level 2 Electrical Fast Transient/Burst Immunity IEC 61000-4-4 Level 2 Surge Immunity IEC 61000-4-5 Level 2 RF, Conducted Disturbance Immunity IEC 61000-4-6 Level 2 Power frequency Magnetic Field Immunity IEC 61000-4-8 Voltage dips, Short Interruptions Immunity IEC 61000-4-11 Tel: +1 514 620 2722 2 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL5-AZ 5 Watt | AC-DC / DC-DC Converter Additional Surge Protective Circuitry The AMEL5-AZ series design level surge protection is certified to IEC 61000-4-5 surge Line to Line of 1KV. However greater protection can be enhanced by adding protective devices to ingress circuitry. For example, by adding an MOV (Metal Oxide Varistor) device example S14K320E2 to the N / L input lines 2KV surge protection or greater, can be achieved. MOV PN Vrms V Vdc V Wmax (2ms) J Pmax W S14K320E2 320 420 136 0.6 Pin Out Specifications Pin Single 1 2 3 4 5 AC Input (N) AC Input (L) +V Output -V Output No pin Dimensions 2.03 (51.50) 1.80 (45.72) 1 1 3 3 0.40 (10.16) 1.10 0.80 (28.00) (20.32) TOP VIEW TOP VIEW 4 4 0.40 (10.16) 2 2 5 5 0.11 (2.89) 17.80 (0.70) 5 Ø- 0.047 (Ø 1.2) Ø 0.04 (1.00) Dimensions: inch (mm) Case Tolerance:± 0.012 (0.30) Pin Pitch Tolerance: ± 0.012 (0.30) 0.2 (5.08) (Min) www.aimtec.com F 052e R8.O DIV: 0.2 (5.08) Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL5-AZ 5 Watt | AC-DC / DC-DC Converter Derating Earth/Ground Connection for AMEL5-xxSGAZ models L +Vout 100-277VAC AMEL5‐xxSGAZ N -Vout AMEL5‐xxSGAZ models meet the EN55022 class B compliance when connected to Earth/Ground. These models are incorporating an EMC compliant filter and when connected to Earth/GND, no external filtering will be needed to meet the specified limits. Models include: AMEL5‐3.3SGAZ, AMEL5‐5SGAZ, AMEL5‐12SGAZ, AMEL5‐15SGAZ, and AMEL5‐24SGAZ www.aimtec.com F 052e R8.O Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AMEL5-AZ 5 Watt | AC-DC / DC-DC Converter Dimensions of Optional ST Mounting Plate Version Pin Out Specification ST Version 86.00 38.00 25.00 70.00 NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 052e R8.O Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only