AIMTEC AMER90

Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
FEATURES:
 AC-DC Constant Current or Constant
Voltage LED Driver
 Input range 90-305VAC/47-440Hz
 High Efficiency up to 91%
 Operating temperature -40 to 85°C
 Dimmable via analog / 0-10V dimming ②
Models
Single output





Over Temperature Protection
Over Current Protection
Waterproof Case rated IP68
Power Factor Correction
Short Circuit Protection
Model
Max
Output
Power
(W) ①
Output
Voltage
③
Range (V) Output
Current
③
(A)
Input Voltage
(VAC/Hz)
Input
Voltage
(VDC)
AMER90-50180AZ
90
36-50
0-1.8
90-305/47-440
120-430
24-36
0-2.5
90-305/47-440
120-430
12-24
0-3.75
90-305/47-440
120-430
AMER90-36250AZ
AMER90-24375AZ
90
90
Mode of Operation
Efficiency
(%)
Constant Current
91
89
90
88
89
88
Constant Voltage ②
Constant Current
Constant Voltage ②
Constant Current
Constant Voltage ②
Add Suffix “-F”
No dimming option
Exceeding the maximum output power will permanently damage the converter
② The dimming feature is not supported when units are used in Constant Voltage mode only, Aimtec suggests to order “-F” No dimming
option in this case.
③
In constant current mode output current is maximum shown, in constant voltage mode output voltage is the maximum shown.
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
①
Input Specifications
Parameters
Inrush current <2ms
Leakage current
AC current
Power Factor
External fuse
Start up time
Surge voltage
Conditions
Typical
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
115VAC
230VAC
40
50
0.5
0.75
1.4
0.46
Maximum
Units
A
mA
A
0.98
0.94
250V/2.5A
700
2sec
440
ms
V
Maximum
Units
Output Specifications
Parameters
Conditions
Typical
Current accuracy
±3
Line regulation
LL-HL
±1
Load regulation
0-100% load
±0.3
20MHz Bandwidth
75
Ripple & Noise ④
Hold-up time
100
Current adjustment range
100-0
Minimum Load Voltage
See the models table
④ Tested with 0.1µF (C/C) or (M/C) and 47µF (E/C) parallel capacitors at the end.
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
1 of 10
%
%
%
mV p-p
ms
%
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Isolation Specifications
Parameters
Conditions
Tested I/O voltage
Isolation Resistance
Isolation Capacitance
Typical
3sec
500VDC
Rated
Units
3000
VAC
MΩ
pF
>1000
1000
General Specifications
Parameters
Switching frequency
Over current protection
Over voltage protection
Short circuit protection
Short circuit restart
Over temperature protection
Operating temperature
Maximum case temperature
Storage temperature
Temperature coefficient
Cooling
Humidity
Case material
Potting
Wires
Weight
Dimensions (L X H X W)
MTBF
Conditions
Typical
See derating table
100
95-110% of Iout
110% of Vout
Continuous
Auto recovery
>105°C
-40 to +85
Maximum
Units
KHz
o
100
-40 to +95
±0.02
Free air convection
95
Aluminum
Epoxy (IP67 rated)
UL1015 18AWG *20CM
750
7.13 x 2.32 x 1.85 inches
181.00 x 59.00 x 47.00 mm
>400,000 hrs (MIL-HDBK-217F at +25°C)
C
C
o
C
o
%/ C
o
% RH
g
Safety Specifications
Parameters
Agency approvals
Standards
www.aimtec.com
F 052.1e R3.S
cULus, CE
UL8750, UL60950-1, EN55022, class B, EN60529(IP68), EN61347-1, EN61347-2-13
Information Technology Equipment
EN55022 Class B
Harmonic Current Emissions
IEC/EN 61000-3-2, Class C
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity
IEC 61000-4-2
RF, Electromagnetic Field Immunity
IEC 61000-4-3
Electrical Fast Transient / Burst Immunity
IEC 61000-4-4
Surge Immunity
IEC 61000-4-5
RF, Conducted Disturbance Immunity
IEC 61000-4-6
Power frequency Magnetic Field Immunity
IEC 61000-4-8
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
Tel: +1 514 620 2722
2 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Dimensions
Analog (resistive) Dimming Application Circuit
Model Number
AMER90-50180AZ
AMER90-36250AZ
AMER90-24375AZ
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
3 of 10
Maximum Pot
Value (kΩ)
15.00
24.00
16.95
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
R28
1K5, 0805
0-10V Dimming Application Circuit
Temperature Graph
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
4 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Efficiency vs. Input Voltage and Output Current (CC Load)
AMEPR90-50180AZ
AMER90-36250AZ
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
5 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Efficiency vs. Input Voltage and Output Current (CC Load)
(continued)
AMER90-24375AZ
PFC Value vs. Output Load Current (CC Load)
AMEPR90-50180AZ
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
6 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
PFC Value vs. Output Load Current (CC Load)
(continued)
AMER90-36250AZ
AMER90-24375AZ
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
7 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Constant Current Mode vs. Constant Voltage Mode
AMEPR90-50180AZ
AMER90-36250AZ
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
8 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Constant Current Mode vs. Constant Voltage Mode
(continued)
AMER90-24375AZ
Output Current vs. Radj
AMEPR90-50180AZ
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
9 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AMER90-AZ
up to 3.75A | AC-DC / DC-DC | LED Driver / Converter
Output Current vs. Radj
(continued)
AMER90-36250AZ
AMER90-24375AZ
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052.1e R3.S
Tel: +1 514 620 2722
10 of 10
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only