AOSMD AOK40N30 300v,40a n-channel mosfet Datasheet

AOK40N30
300V,40A N-Channel MOSFET
General Description
Product Summary
The AOK40N30 is fabricated using an advanced high
voltage MOSFET process that is designed to deliver high
levels of performance and robustness in popular AC-DC
applications.By providing low RDS(on), Ciss and Crss along
with guaranteed avalanche capability this part can be
adopted quickly into new and existing offline power supply
designs.
VDS
ID (at VGS=10V)
350@150℃
40A
RDS(ON) (at VGS=10V)
< 0.085Ω
100% UIS Tested
100% Rg Tested
For Halogen Free add "L" suffix to part number:
AOK40N30L
Top View
D
TO-247
G
S
G
S
D
AOK40N30
Absolute Maximum Ratings TA=25°C unless otherwise noted
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
Continuous Drain
Current
VGS
TC=25°C
TC=100°C
ID
AOK40N30
300
Units
V
±30
V
40
25
A
Pulsed Drain Current C
IDM
Avalanche Current C
IAR
8.5
A
Repetitive avalanche energy C
EAR
1083
mJ
Single plused avalanche energy G
Peak diode recovery dv/dt
TC=25°C
Power Dissipation B Derate above 25oC
Junction and Storage Temperature Range
Maximum lead temperature for soldering
purpose, 1/8" from case for 5 seconds
Thermal Characteristics
Parameter
Maximum Junction-to-Ambient A,D
Maximum Case-to-sink A
Maximum Junction-to-Case
EAS
dv/dt
2167
5
357
mJ
V/ns
W
2.9
-55 to 150
W/ oC
°C
300
°C
AOK40N30
40
0.5
0.35
Units
°C/W
°C/W
°C/W
Rev0: Jul 2012
PD
TJ, TSTG
TL
Symbol
RθJA
RθCS
RθJC
www.aosmd.com
135
Page 1 of 5
AOK40N30
Electrical Characteristics (TJ=25°C unless otherwise noted)
Symbol
Parameter
Conditions
Min
ID=250µA, VGS=0V, TJ=25°C
300
Typ
Max
Units
STATIC PARAMETERS
BVDSS
Drain-Source Breakdown Voltage
BVDSS
/∆TJ
Zero Gate Voltage Drain Current
IDSS
Zero Gate Voltage Drain Current
ID=250µA, VGS=0V, TJ=150°C
350
V
ID=250µA, VGS=0V
0.28
V/ oC
VDS=300V, VGS=0V
1
VDS=240V, TJ=125°C
10
IGSS
Gate-Body leakage current
VDS=0V, VGS=±30V
VGS(th)
Gate Threshold Voltage
VDS=5V, ID=250µA
RDS(ON)
Static Drain-Source On-Resistance
VGS=10V, ID=20A
gFS
Forward Transconductance
VDS=40V, ID=20A
32
VSD
Diode Forward Voltage
IS=1A,VGS=0V
0.7
IS
ISMC
3.5
4.1
nΑ
V
0.065
0.085
Ω
1
V
Maximum Body-Diode Continuous Current
40
A
Maximum Body-Diode Pulsed Current
135
A
DYNAMIC PARAMETERS
Ciss
Input Capacitance
Coss
±100
µA
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate resistance
2.9
S
2170
2718
3270
pF
VGS=0V, VDS=25V, f=1MHz
280
405
530
pF
18
31
45
pF
VGS=0V, VDS=0V, f=1MHz
0.6
1.4
2.1
Ω
48
60
72
nC
SWITCHING PARAMETERS
Qg
Total Gate Charge
VGS=10V, VDS=240V, ID=40A
Qgs
Gate Source Charge
Qgd
Gate Drain Charge
tD(on)
Turn-On DelayTime
tr
Turn-On Rise Time
tD(off)
Turn-Off DelayTime
tf
trr
Turn-Off Fall Time
IF=40A,dI/dt=100A/µs,VDS=100V
220
275
330
Qrr
Body Diode Reverse Recovery Charge IF=40A,dI/dt=100A/µs,VDS=100V
6.5
8.2
10
Body Diode Reverse Recovery Time
VGS=10V, VDS=150V, ID=40A,
RG=25Ω
13
nC
21
nC
54
ns
166
ns
152
ns
118
ns
ns
µC
A. The value of R θJA is measured with the device in a still air environment with T A =25°C.
B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper
dissipation limit for cases where additional heatsinking is used.
C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial
TJ =25°C.
D. The R θJA is the sum of the thermal impedance from junction to case R θJC and case to ambient.
E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max.
F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a
maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.
G. L=60mH, IAS=8.5A, VDD=150V, RG=25Ω, Starting TJ=25°C
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING
OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,
FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Rev0: Jul 2012
www.aosmd.com
Page 2 of 5
AOK40N30
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
1000
100
VDS=40V
7V
10V
80
-55°C
6.5V
100
ID (A)
60
ID(A)
6V
125°C
10
40
25°C
5.5V
1
20
VGS=5V
0
0.1
0
5
10
15
20
25
30
2
4
6
8
VGS(Volts)
Figure 2: Transfer Characteristics
VDS (Volts)
Fig 1: On-Region Characteristics
3
Normalized On-Resistance
0.15
0.13
RDS(ON) (Ω
Ω)
10
0.11
VGS=10V
0.09
0.07
2.5
2
VGS=10V
ID=20A
1.5
1
0.5
0.05
0
0
15
30
45
60
75
90
ID (A)
Figure 3: On-Resistance vs. Drain Current and Gate
Voltage
-100
1.2
-50
0
50
100
150
200
Temperature (°C)
Figure 4: On-Resistance vs. Junction Temperature
1.0E+02
40
1.0E+00
IS (A)
BVDSS (Normalized)
1.0E+01
1.1
1
125°C
1.0E-01
25°C
1.0E-02
0.9
1.0E-03
0.8
1.0E-04
-100
50
100
150
200
TJ (°C)
Figure 5:Break Down vs. Junction Temparature
Rev0: Jul 2012
-50
0
www.aosmd.com
0.0
0.2
0.4
0.6
0.8
1.0
VSD (Volts)
Figure 6: Body-Diode Characteristics (Note E)
Page 3 of 5
AOK40N30
TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
15
10000
Capacitance (pF)
VGS (Volts)
Ciss
VDS=240V
ID=40A
12
9
6
1000
Coss
100
Crss
3
0
10
Current rating ID(A)
0
15
30
45
60
75
Qg (nC)
Figure 7: Gate-Charge Characteristics
90
0.1
50
1000
40
100
20
10
100
10µs
RDS(ON)
limited
100µs
1ms
DC
10ms
1
100ms
0.1
0
10
VDS (Volts)
Figure 8: Capacitance Characteristics
10
ID (Amps)
30
1
TJ(Max)=150°C
TC=25°C
0.01
0
25
50
75
100
125
TCASE (°C)
Figure 9: Current De-rating (Note B)
150
1
10
100
1000
VDS (Volts)
Figure 10: Maximum Forward Biased Safe
Operating Area for AOK40N30 (Note F)
Zθ JC Normalized Transient
Thermal Resistance
10
1
D=Ton/T
TJ,PK=TC+PDM.ZθJC.RθJC
RθJC=0.35°C/W
In descending order
D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
0.1
PD
0.01
Ton
T
Single Pulse
0.001
1E-06
Rev0: Jul 2012
1E-05
0.0001
0.001
0.01
0.1
Pulse Width (s)
Figure 11: Normalized Maximum Transient Thermal Impedance for AOK40N30 (Note F)
www.aosmd.com
1
10
Page 4 of 5
AOK40N30
Gate Charge Test Circuit & Waveform
Vgs
Qg
10V
+
+ Vds
VDC
-
Qgs
Qgd
VDC
DUT
-
Vgs
Ig
Charge
Res istive Switching Test Circuit & Waveforms
RL
Vds
Vds
DUT
Vgs
+
VDC
90%
Vdd
-
Rg
10%
Vgs
Vgs
t d(on)
tr
t d(off)
t on
tf
t off
Unclamped Inductive Switching (UIS) Test Circuit & Waveforms
L
EAR= 1/2 LI
Vds
2
AR
BVDSS
Vds
Id
+ Vdd
Vgs
Vgs
I AR
VDC
-
Rg
Id
DUT
Vgs
Vgs
Diode Recovery Tes t Circuit & Waveforms
Qrr = - Idt
Vds +
DUT
Vgs
Vds -
Isd
Vgs
Ig
Rev0: Jul 2012
L
Isd
+
VDC
-
IF
trr
dI/dt
IRM
Vdd
Vdd
Vds
www.aosmd.com
Page 5 of 5
Similar pages