AOSMD AOZ6135 High performance, low ron, 1î© spdt analog switch Datasheet

AOZ6135
High Performance, Low RON,
1Ω SPDT Analog Switch
General Description
Features
The AOZ6135 is a high performance single-pole
double-throw (SPDT), low power, TTL-compatible bus
switch.
●
SC-70 6-Lead Package
●
1.65V to 5.5V VCC operation
●
1Ω connection between ports
●
Break-before-make switching
The AOZ6135 can handle analog and digital signals.
Signals with voltages up to VCC (1.65V to 5.5V) can be
transmitted in either direction.
When the Select pin is LOW, B0 is connected to the
output A pin. When the Select pin is HIGH, B1 is
connected to the output A pin. The path that is open will
have a high-impedance state with respect to the output.
Break-before-make is guaranteed.
Typical Application
AOZ6135
External
MIC
MIC Pre-Amp
CODEC
Internal
MIC
Rev. 1.1 April 2010
www.aosmd.com
Page 1 of 11
AOZ6135
Ordering Information
Part Number
Ambient Temperature Range
Package
Environmental
AOZ6135HI
-40°C to +85°C
SC-70-6
RoHS Compliant
Green Product
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/web/quality/rohs_compliant.jsp for additional information.
Pin Configuration
B1
1
6
S
GND
2
5
Vcc
B0
3
4
A
SC-70-6
(Top View)
Truth Table
Logic S Input
Function
0
B0 Connected to A
1
B1 Connected to A
Rev. 1.1 April 2010
www.aosmd.com
Page 2 of 11
AOZ6135
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Symbol
Parameter
VCC
Rating
Supply Voltage
-0.5V to +6V
(1)
Switch Voltage
VS
-0.5V to VCC
(1)
VIN
Input Voltage
IIK
Minimum Input Diode Current(2)
-50mA
ISW
Switch Current
200mA
Peak Switch Current (Pulsed at 1ms, <10% Duty Cycle)
400mA
ISWPEAK
-0.5V to VCC
Storage Temperature Range
TSTG
-65°C to +150°C
Maximum Junction Temperature
TJ
180mW
Human Body Model (JESD22A-114E)
8000V
SC-70-6 Power Dissipation at 85°C
PD
ESD
+150°C
(3)
Recommend Operating Ratings
The device is not guaranteed to operate beyond the Maximum Operating Ratings.
Symbol
VCC
Parameter
Supply Voltage
1.65V to +5.5V
Voltage(4)
VIN
Control Input
VSW
Switch Input Voltage
TA
Rating
0V to VCC
0V to VCC
Operating Temperature
-40°C to +85°C
Notes:
1. Signals on A, or B or S exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
2. Negative current should not exceed minimum negative value.
3. All leads welded or soldered to PC Board.
4. Unused inputs must be held HIGH or LOW. They may not float.
Rev. 1.1 April 2010
www.aosmd.com
Page 3 of 11
AOZ6135
Electrical Characteristics
Unless otherwise indicated, specifications indicate a temperature range of -40°C to +85°C
Symbol
Parameter
Test Conditions
VCC (V)
Min.
1.65 to 2.7
1.0
2.7 to 3.6
1.5
4.5 to 5.5
2.0
Typ.(1)
Max.
Units
DC CHARACTERISTICS
VIH
VIL
RON
RFLAT
ΔRON
Input Voltage High
Input Voltage Low
On Resistance
On Resistance
Flatness
On Resistance
Matching Between
Channels
V
1.65 to 2.7
0.4
2.7 to 3.6
0.6
4.5 to 5.5
0.8
IOUT =100mA,
B0 or B1 = 0V, 1.5V, 2.5V, 3.5V,
3.75V, 4.5V
4.5
0.6
1.2
IOUT = 100mA,
B0 or B1 = 0V, 1.5V, 2V, 2.7V
2.7
1.0
1.5
IOUT =100mA,
B0 or B1 = 0V, 1.25V, 1.5V, 1.8V
1.8
3.0
6.0
IOUT =100mA,
B0 or B1 = 0V to VCC
4.5
0.2
2.7
0.3
1.8
2.5
4.5
0.03
IOUT =100mA, B0 or B1 = 1.5V
V
Ω
Ω
0.15
Ω
IOUT =100mA, B0 or B1 = 3.5V
Input Leakage
Current
VIN = 0V or VCC
1.95 to 5.5
±1.0
µA
IB(off)
Off Stage Switch
Leakage
A = 1V, 4.5V,
B0 or B1 = 4.5V, 1V
1.95 to 5.5
±20
nA
IA(on)
On State Switch
Leakage
A = 1V, 4.5V,
B0 or B1 = 4.5V, 1V or floating
1.95 to 5.5
±40
nA
IIN
POWER SUPPLY
VCC
Power Supply Range
ICCQ
Quiescent Supply
Current
ICCT
Increase in ICC
per Input
Rev. 1.1 April 2010
1.65 to 5.5
VIN = 0V or VCC, IOUT = 0V
5.5
VIN = 1.8V
5.5
VIN = 2.6V
www.aosmd.com
1.65
5.5
V
0.5
µA
30
40
µA
18
25
Page 4 of 11
AOZ6135
Electrical Characteristics (Continued)
Unless otherwise indicated, specifications indicate a temperature range of -40°C to +85°C
Symbol
Test Conditions
VCC (V)
B0 or B1 = 1.5V, RL = 50Ω, CL = 35pF
Parameter
Min.
Typ.(1)
Max.
Units
2.7 to 3.6
60
65
ns
4.5 to 5.5
35
40
2.7 to 3.6
20
30
4.5 to 5.5
15
20
AC CHARACTERISTICS
tON
tOFF
tBBM
Q
Turn-On Time
Turn-Off Time
B0 or B1 = 1.5V, RL = 50Ω, CL = 35pF
Break-Before-Make
Time
Charge Injection
1.65 to 1.95
CL = 1.0nF, VGE = 0V, RGEN = 0Ω
20
2.3 to 2.7
20
3.0 to 3.65
20
4.5 to 5.5
20
4.5 to 5.5
75
2.7 to 3.6
50
ns
ns
pC
ANALOG SWITCH CHARACTERISTICS
OIRR
Off Isolation
RL = 50Ω, f = 1MHz
2.7 to 5.5
-60
dB
XTALK
Crosstalk
RL = 50Ω, f = 1MHz
2.7 to 5.5
-60
dB
BW
-3dB Bandwidth
RL = 50Ω
2.7 to 5.5
180
MHz
THD
Total Harmonic
Distortion
VIN = 2Vpk-pk, f = 20Hz to 20kHz
2.7 to 5.5
0.002
%
CAPACITANCE
CIN
Control Pin
Capacitance
f = 1MHz, Vbias = 1.5V
0.0
3.0
pF
COFF
B Port Off
Capacitance
f = 1MHz, Vbias = 1.5V
4.5
7.0
pF
CON
A Port Capacitance
When Switch Enable
f = 1MHz, Vbias = 1.5V
4.5
40.0
pF
Notes:
1. Typical values are for design aid only, not guaranteed nor subject to
production testing.
Rev. 1.1 April 2010
www.aosmd.com
Page 5 of 11
AOZ6135
AC Loading and Waveforms
Vcc
Control
Input
VOUT
VB
RL
50Ω
t
Vcc
R = t F = 2.5nS
50%
0V
t OFF
CL
35pF
VOUT
Switch
Output
GND
0.9 x VOUT
0.9 x VOUT
0
t ON
Logic input waveform are inverted for switches with opposite
logic sense
CL Includes Fixture and Stray Capacitance
Figure 1. Turn-On/Turn-Off Timing
Vcc
Vcc
BN
BN
A
A
+
+
+
S
S
+
+
GND
Figure 2. Off State Leakage Current
GND
Figure 3. On State Leakage Current
Vcc
B0
VB
Vcc
A
B1
VOUT
RL
50 Ω
S
CL
35pF
Control
Input
50%
0V
t
R = t F = 2.5nS
VOUT
GND
0.9 x VOUT
tD
CL Includes Fixture and Stray Capacitance
Figure 4. Break-Before-Make Timing
Network
Analyzer
Vcc
B0
VIN
VOUT
50Ω
A
Network
Analyzer
Vcc
B0
50Ω
Source
Signal
B1
A
VIN
VOUT
50Ω
Source
Signal
50Ω
S
Vcc or 0V
+
S
50Ω
50Ω
GND
GND
Figure 6. Crosstalk
Figure 5. Off Isolation
Rev. 1.1 April 2010
Vcc or 0V
+
www.aosmd.com
Page 6 of 11
AOZ6135
AC Loading and Waveforms (Continued)
Vcc
BN
A
+
S
+
GND
Figure 7. On State Resistance
Vcc
R GEN
A
V GEN
VOUT
VOUT
B 0 or B 1
Input
Control
CL
IN
Δ VOUT
OFF
OFF
ON
S
GND
ON
OFF
IN
OFF
Q = (ΔVOUT)(CL)
Figure 8. Charge Injection
Vcc
10nF
Vcc
Network Analyzer
50Ω
BN
A
A
S
Capacitance
Meter
f = 1MHz
B 0 or B1
Source
Signal
0V
or
Vcc
S
+
50Ω
GND
GND
Figure 9. ON/Off Capacitance Measurement
Figure 10. Bandwidth
Vcc
Audio Analyzer
600 Ω
A
BN
CL
Source
Signal
S
+
600 Ω
GND
CL Includes Fixture and Stray Capacitance
Figure 11. Harmonic Distortion
Rev. 1.1 April 2010
www.aosmd.com
Page 7 of 11
AOZ6135
Package Dimensions, SC70-6L
D
Gauge Plane
0.15mm
e1
θ
L
E1
E
e
c
b
A2
A
.010mm
A1
Dimensions in millimeters
RECOMMENDED LAND PATTERN
1.95
0.65
0.35
0.65
UNIT: mm
Symbols
A
A1
A2
b
Min.
c
D
E
e
e1
0.08
1.85
1.80
E1
L
θ
1.1
0.26
0°
0.00
0.7
0.15
Nom.
—
—
0.9
—
Max.
1.10
0.10
1.00
0.30
—
0.22
2.10
2.15
2.30
2.40
0.65 BSC
1.30 BSC
1.30
0.36
4°
1.4
0.46
8°
Dimensions in inches
Symbols
A
A1
A2
b
Min.
0.00
0.028
0.006
c
D
E
e
e1
0.003
0.073
0.071
E1
L
θ
0.043
0.010
0°
Nom.
—
—
0.035
—
Max.
0.043
0.004
0.039
0.012
—
0.009
0.083 0.085
0.091 0.094
0.026 BSC
0.051 BSC
0.051
0.014
4°
0.055
0.018
8°
Notes:
1. All dimensions are in millimeters.
2. Dimensions are inclusive of plating
3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 3 mils.
4. Die is facing up for mold and facing down for trim/form; i.e., reverse trim/form.
5. Dimension L is measured in gauge plane.
6. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact.
Rev. 1.1 April 2010
www.aosmd.com
Page 8 of 11
AOZ6135
Tape and Reel Dimensions, SC70-6L
Carrier Tape
P1
D1
P2
T
E1
E2
E
B0
K0
A0
D0
P0
Feeding Direction
UNIT: mm
Package
SC-70, 6L
(8mm)
A0
2.40
±0.10
B0
2.40
±0.10
K0
1.19
±0.10
D0
1.00
Min.
D1
1.55
±0.05
E
8.00
±0.30
Reel
E1
1.75
±0.10
E2
3.50
±0.05
P0
4.00
±0.10
P1
4.00
±0.10
P2
2.00
±0.05
T
0.25
±0.05
W1
S
G
N
M
K
V
R
H
W
W
N
Tape Size Reel Size
M
8mm
ø180
ø180.00 ø60.50 9.00
±0.30
±0.50
W1
11.40
±1.00
H
K
ø13.00
10.60
+0.50/-0.20
S
2.00
±0.50
G
ø9.00
R
5.00
V
18.00
Leader/Trailer and Orientation
Trailer Tape
300mm min. or
75 empty pockets
Rev. 1.1 April 2010
Components Tape
Orientation in Pocket
www.aosmd.com
Leader Tape
500mm min. or
125 empty pockets
Page 9 of 11
AOZ6135
Part Marking
AOZ6135HI
AWL
Part Number Code
Assembly Lot & Location Code
Week & Year Code
Rev. 1.1 April 2010
www.aosmd.com
Page 10 of 11
AOZ6135
Revision History
Revision
Revised Item
Rev. 1.0
Initial release
Rev. 1.1
IccT Max Limit relaxed after production data were collected
This datasheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 1.1 April 2010
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 11 of 11
Similar pages