AOSMD AOZ6237QI 0.35 ohm low-voltage dual spdt analog switch Datasheet

AOZ6237
0.35  Low-Voltage Dual SPDT Analog Switch
General Description
Features
The AOZ6237 is a 0.35 Ω low-voltage Dual Single Pole
Double Throw (SPDT) analog switch. The AOZ6237
operates from a single 1.65 V to 4.3 V supply. It features
an ultra-low On Resistance of 0.35 Ω at a +3.0 V supply
and 25 °C. The AOZ6237 is designed for break-beforemake operation.
 Typical 0.35
 0.15
Ω On Resistance (RON) for +3.0 V supply
Ω maximum RON flatness for +3.0 V supply
 Package Options:
– TQFN-10: 1.8mm x 1.4 mm x 0.55 mm package
– QFN-10: 1.8mm x 1.4 mm x 0.75 mm package
 Broad VCC operating range: 1.65 V to 4.3 V
 High current handling capability (350 mA continuous
current under 3.3 V supply)
Applications
 Cell phone
 PDA
 Portable media player
Typical Application
Pin Configuration
AOZ6237
1S
Integrated
Base Band
Processor
1B0
1B1
1B1
2B0
2S
Rev. 2.1 September 2012
1B0
2B1
www.aosmd.com
1A
1S
2B0
2A
2B1
2S
Page 1 of 12
AOZ6237
Ordering Information
Part Number
Ambient Temperature Range
AOZ6237QT
AOZ6237QI
-40 °C to +85 °C
Package
Environmental
TQFN-10
RoHS Compliant
Green Product
QFN-10
AOS Green Products use reduced levels of Halogens, and are also RoHS compliant.
Please visit www.aosmd.com/media/AOSGreenPolicy.pdf for additional information.
Pin Configuration
1S
2S
7
6
1A 8
5
2A
Vcc 9
4
GND
1B0 10
3
2B1
1
2
1B1
2B0
TQFN-10 / QFN-10
(Top View)
Pin Description
Truth Table
Pin Name
Function
Logic Input
Function
1A, 2A, 1B0, 1B1, 2B0, 2B1
Data Ports
0
B0 Connected to A
1S, 2S
Control Input
1
B1 Connected to A
Rev. 2.1 September 2012
www.aosmd.com
Page 2 of 12
AOZ6237
Absolute Maximum Ratings
Exceeding the Absolute Maximum ratings may damage the device.
Symbol
VCC
VSW
Parameter
Rating
Supply Voltage
Switch Voltage
-0.5 V to +5.5 V
(1)
-0.5 V to VCC + 0.5 V
(1)
VIN
Input Voltage
IIK
Minimum Input Diode Current(2)
-50 mA
ISW
Switch Current
350 mA
Peak Switch Current (Pulsed at 1 ms duration, < 10 % Duty Cycle)
500 mA
ISWPEAK
TSTG
-0.5 V to VCC
Storage Temperature Range
-65 °C to +150 °C
TJ
Maximum Junction Temperature
+150 °C
TL
Lead Temperature (Soldering, 10 seconds)
+260 °C
ESD
Human Body Model
8000 V
Charged Device Model
1000 V
Recommended Operating Conditions
The device is not guaranteed to operate beyond the Recommended Operating Conditions.
Symbol
VCC
Parameter
Supply Voltage
1.65 V to +4.3 V
Voltage(3)
VIN
Control Input
VSW
Switch Input Voltage
TA
Rating
0 V to VCC
0 V to VCC
Operating Temperature
-40 °C to +85 °C
Notes:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed.
2. Negative current should not exceed minimum negative value.
3. Unused inputs must be held HIGH or LOW. They may not float.
Rev. 2.1 September 2012
www.aosmd.com
Page 3 of 12
AOZ6237
DC Electrical Characteristics
All typical values are at 25°C unless otherwise specified.
Symbol
VIH
VIL
Parameter
Conditions
Input Voltage HIGH
Input Voltage LOW
VCC (V)
Min.
3.6 to 4.3
1.7
2.7 to 3.6
1.5
2.3 to 2.7
1.4
1.65 to 1.95
0.9
Typ.
Max.
V
3.6 to 4.3
0.7
2.7 to 3.6
0.5
2.3 to 2.7
0.4
1.65 to 1.95
IIN
0.4
-0.5
0.5
µA
INO(OFF), Off-Leakage Current of Port nA = 0.3 V, 3.3 V, nB0 or
nB1 = 0.3 V, 3.3 V or floating
INC(OFF) nB0 and nB1
4.3
-50
50
nA
3.6
-50
50
nA = 0.3 V, 2.4 V, nB0 or
nB1 = 0.3 V, 2.4 V or floating
2.7
-50
50
nA = 0.3 V, 1.65 V, nB0 or
nB1 = 0.3 V, 1.65 V or floating
1.95
-50
50
On Leakage Current of Port nA = 0.3 V, 3.3 V, nB0 or
1A and 2A
nB1 = 0.3 V, 3.3 V or floating
4.3
-50
50
3.6
-50
50
nA = 0.3 V, 2.4 V, nB0 or
nB1 = 0.3 V, 2.4 V or floating
2.7
-50
50
nA = 0.3 V, 1.65 V, nB0 or
nB1 = 0.3 V, 1.65 V or floating
1.95
-100
100
IOUT = 100 mA, nB0 or
nB1 = 0 V, 0.7 V, 3.6 V, 4.3 V
4.3
0.35
0.40
IOUT = 100 mA, nB0 or
nB1 = 0 V, 0.7 V, 2.3 V, 3.0 V
3.0
0.35
0.50
IOUT = 100 mA, nB0 or
nB1 = 0 V, 0.7 V, 2.0 V, 2.7 V
2.7
0.40
0.60
IOUT = 100 mA, nB0 or
nB1 = 0 V, 0.7 V, 1.6 V, 2.3 V
2.3
0.50
0.70
IOUT = 100 mA, nB0 or
nB1 = 0 V, 0.7 V, 1.65 V
1.65
1.0
2.5
RON
RON
Switch On Resistance(4)
See Figure 5
On Resistance Matching
Between Channels(5)
RFLAT(ON) On Resistance Flatness(6)
VIN = 0 V to VCC
V
1.65 to 3.6
IA(ON)
Control Input Leakage
Units
IOUT = 100 mA, nB0 or
nB1 = 0.7 V
IOUT = 100 mA, nB0 or
nB1 = 0 V to VCC
4.3
0.02
0.13
3.0
0.02
0.13
2.7
0.02
0.13
2.3
0.02
1.65
1.0
4.3
0.06
3.0
0.06
0.15
2.7
0.09
0.15
2.3
0.18
1.65
ICC
Quiescent Supply Current
ICCT
Increase in ICC per Input
VIN = 0 V or VCC , IOUT = 0 A
3.6
Input at 2.6 V
4.3
Input at 1.8 V
0.15
nA
Ω
Ω
Ω
2.0
-500
500
nA
4.0
20.0
µA
13.0
25.0
Notes:
4. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch.
5. RON = RONmax – RONmin measured at identical VCC , temperature, and voltage.
6. Flatness is defined as the difference between the maximum and minimum value of RON over the specified range of conditions.
Rev. 2.1 September 2012
www.aosmd.com
Page 4 of 12
AOZ6237
AC Electrical Characteristics
All typical values are at 25°C unless otherwise specified.
Symbol
tON
tOFF
tBBM
Parameter
Turn-On Time
Turn-Off Time
Break-Before-Make Time
Conditions
VCC (V)
nB0 or nB1 = 1.5 V, RL = 50 Ω,
CL = 35 pF
nB0 or nB1 = 1.5 V, RL = 50 Ω,
CL = 35 pF
nB0 or nB1 = 1.5 V, RL = 50 Ω,
CL = 35 pF
Min.
Typ.
Max.
Units
3.6 to 4.3
45
60
ns
2.7 to 3.6
50
70
100
2.3 to 2.7
95
1.65 to 1.95
160
3.6 to 4.3
30
35
2.7 to 3.6
35
40
2.3 to 2.7
60
65
1.65 to 1.95
110
3.6 to 4.3
2.0
15.0
2.7 to 3.6
2.0
15.0
2.3 to 2.7
2.0
20.0
1.65 to 1.95
2.0
25.0
ns
ns
Charge Injection
CL = 100 pF, VGEN = 0 V,
RGEN = 0 Ω
1.65 to 4.3
40
pC
OIRR
Off Isolation
f = 100 kHz, RL = 50 Ω,
CL = 5 pF (Stray)
1.65 to 4.3
-70.0
dB
Xtalk
Crosstalk
f = 100 kHz, RL = 50 Ω,
CL = 5 pF (Stray)
1.65 to 4.3
-70.0
dB
BW
-3dB Bandwidth
RL = 50 Ω
1.65 to 4.3
> 50
MHz
THD
Total Harmonic
Distortion
RL = 32 Ω, VIN = 2 Vpk-pk,
f = 20 Hz to 20 kHz
2.7 to 4.3
0.01
%
Q
Capacitance
Symbol
Parameter
Conditions
VCC (V)
CIN
Control Pin Input Capacitance
f = 1 MHz Vbias = 1.5 V
0.0
2
pF
COFF
B Port Off Capacitance
f = 1 MHz Vbias = 1.5 V
3.3
15
pF
CON
A Port On Capacitance
f = 1 MHz Vbias = 1.5 V
3.3
110
pF
Rev. 2.1 September 2012
www.aosmd.com
Min.
Typ.
Max.
Units
Page 5 of 12
AOZ6237
Typical Performance Characteristics
RDS(on) vs. Analog Voltage @ 85 °C
2.0
1.8
1.8
RDS(on) - Drain-Source On Resistance (mΩ)
RDS(on) - Drain-Source On Resistance (mΩ)
RDS(on) vs. Analog Voltage @ 25 °C
2.0
1.6
Vcc =
1.65V
1.4
1.2
2.3V
1.0
2.7V
0.8
3.0V
0.6
4.3V
0.4
0.2
0.0
1.6
Vcc =
1.65V
1.4
1.2
1.0
2.3V
0.8
2.7V
3.0V
0.6
0.4
0.2
0.0
0
0.5
1.0
1.5 2.0 2.5 3.0
VD - Analog Voltage (V)
3.5
4.0
4.5
0
Crosstalk and Off Isolation vs. Frequency
0
-10
-1
1.0
1.5 2.0 2.5 3.0
VD - Analog Voltage (V)
3.5
4.0
4.5
Insertion Loss (db)
-2
-30
-40
-50
0.5
Insertion Loss vs. Frequency
0
-20
Xtalk, OIRR (db)
4.3V
Xtalk
-3
-4
-5
-60
-70
-80
0.01
-6
Off Isolation
0.1
1
10
100
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
Rev. 2.1 September 2012
-7
0.1
www.aosmd.com
Page 6 of 12
AOZ6237
AC Loading and Waveforms
Vcc
Control
Input
VOUT
VB
RL
50Ω
t
Vcc
R = t F = 2.5nS
50%
0V
t OFF
CL
35pF
VOUT
Switch
Output
GND
0.9 x VOUT
0.9 x VOUT
0
t ON
Logic input waveform are inverted for switches with opposite
logic sense
CL Includes Fixture and Stray Capacitance
Figure 1. Turn-On/Turn-Off Timing
Vcc
B0
VB
Vcc
A
B1
VOUT
RL
50 Ω
S
CL
35pF
Control
Input
50%
0V
t
R = t F = 2.5nS
VOUT
GND
0.9 x VOUT
tD
CL Includes Fixture and Stray Capacitance
Figure 2. Break-Before-Make Timing`
Network
Analyzer
Vcc
B0
VIN
VOUT
50Ω
A
Network
Analyzer
Vcc
B0
50Ω
Source
Signal
B1
A
VIN
VOUT
50Ω
Source
Signal
50Ω
S
Vcc or 0V
+
S
50Ω
50Ω
GND
GND
Figure 4. Crosstalk
Figure 3. Off Isolation
Rev. 2.1 September 2012
Vcc or 0V
+
www.aosmd.com
Page 7 of 12
AOZ6237
AC Loading and Waveforms (continued)
Vcc
R GEN
A
B 0 or B 1
V GEN
Input
Control
VOUT
VOUT
CL
IN
Δ VOUT
OFF
OFF
ON
S
GND
ON
OFF
IN
OFF
Q = (ΔVOUT)(CL)
Figure 5. Charge Injection
Vcc
10nF
Vcc
Network Analyzer
50Ω
BN
A
A
S
Capacitance
Meter
f = 1MHz
B 0 or B1
Source
Signal
0V
or
Vcc
S
+
50Ω
GND
GND
Figure 6. ON/Off Capacitance Measurement
Figure 7. Bandwidth
Vcc
Audio Analyzer
600 Ω
A
BN
32Ω
Source
Signal
CL
S
+
600 Ω
GND
CL Includes Fixture and Stray Capacitance
Figure 8. Harmonic Distortion
Rev. 2.1 September 2012
www.aosmd.com
Page 8 of 12
AOZ6237
Package Dimensions, TQFN 1.8 x 1.4 x 0.55, 10L
E
e
L (x9)
Pin #1 ID
0.1 x 45°
e
Pin #1 Dot
by Marking
D
L1
Top View
b (x10)
Bottom View
A
c
A1
Side View
Dimensions in millimeters
RECOMMENDED LAND PATTERN
2.00
1.00
0.60
0.50
0.40
0.20
1.60
0.40
0.50
Symbols
A
A1
b
c
D
E
e
L
L1
Min.
0.50
0.00
0.15
Nom. Max.
0.55
0.60
—
0.05
0.20
0.25
0.152 REF.
1.35
1.40
1.45
1.75
1.80
1.85
0.40 BSC
0.35
0.40
0.45
0.50 REF.
Dimensions in inches
Symbols
A
A1
b
c
D
E
e
L
L1
Min.
Nom. Max.
0.020 0.022 0.024
0.000
—
0.002
0.006 0.008 0.010
0.006 REF.
0.053 0.055 0.057
0.069 0.071 0.073
0.016 BSC
0.014 0.016 0.018
0.020 REF.
1.00
0.60
0.20
0.50
0.20
UNIT: mm
Notes:
1. Controlling dimension is millimeter. Converted inch dimensions are not necessarily exact.
2. Angles are in degrees.
Rev. 2.1 September 2012
www.aosmd.com
Page 9 of 12
AOZ6237
Package Dimensions, QFN 1.8 x 1.4B x 0.75, 10L
e
E
Pin #1 ID
0.1 x 45°
L (x9)
e
D
Pin #1 Dot
by Marking
L1
Top View
b (x10)
Bottom View
A
Side Vew
A1
c
Dimensions in millimeters
RECOMMENDED LAND PATTERN
2.00
0.50
1.00
0.60
0.40
0.20
1.00
1.60
Symbols
A
A1
Min.
0.70
0.00
b
c
D
E
0.15
e
L
L1
Nom.
0.75
—
Max.
0.80
0.05
Dimensions in inches
Symbols
A
A1
Min.
0.028
0.000
Nom.
0.030
—
Max.
0.031
0.002
0.20
0.25
0.203 REF.
1.35
1.40
1.45
1.75
1.80
1.85
b
c
D
E
0.006 0.008 0.010
0.008 REF.
0.053 0.055 0.057
0.069 0.071 0.073
0.40 BSC
0.40
0.45
0.50
0.55
e
L
L1
0.014
0.018
0.35
0.45
0.016 BSC
0.016 0.018
0.020 0.022
0.50
0.40
0.50 0.60
0.20
0.20
UNIT: mm
Notes:
1. Controlling dimension is millimeter. Converted inch dimensions are not necessarily exact.
2. Angles are in degrees.
Rev. 2.1 September 2012
www.aosmd.com
Page 10 of 12
AOZ6237
Tape and Reel Dimensions, TQFN / QFN
Carrier Tape
D0
P1
D1
E1
K0
E2
E
B0
P2
P0
T
Feeding Direction
A0
UNIT: mm
Package
QFN 1.8 x 1.4
A0
1.90
±0.05
B0
1.70
±0.05
K0
D0
D1
1.00
1.50
0.50
±0.05 +0.10/-0 ±0.05
E
E1
8.00
1.75
+0.20/-0.10 ±0.10
E2
3.50
±0.05
P0
4.00
±0.10
P1
P2
4.00
2.00
±0.10 ±0.05
T
0.254
±0.02
Reel
W1
S
G
N
M
K
V
H
R
W
UNIT: mm
Tape Size Reel Size
8mm
ø178
M
ø178.0
±1.0
N
ø70.5
±1.0
W
9.0
±0.5
W1
11.8
±1.1
H
ø13.0
+0.5/-0.2
K
10.25
±0.1
S
2.4
±0.1
G
ø9.8
R
N/A
V
N/A
Leader/Trailer and Orientation
Trailer Tape
300mm min.
Rev. 2.1 September 2012
Components Tape
Orientation in Pocket
www.aosmd.com
Leader Tape
500mm min.
Page 11 of 12
AOZ6237
Part Marking
AOZ6237QT
(TQFN-10)
AOZ6237QT
Product Number Code
CR1
Assembly Lot Code and
Assembly Location Code
Week Code and
Year Code
AOZ6237QI
(QFN-10)
AOZ6237QI
Product Number Code
AR1
Assembly Lot Code and
Assembly Location Code
Week Code and
Year Code
This datasheet contains preliminary data; supplementary data may be published at a later date.
Alpha & Omega Semiconductor reserves the right to make changes at any time without notice.
LIFE SUPPORT POLICY
ALPHA & OMEGA SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL
COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body or (b) support or sustain life, and (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of
the user.
Rev. 2.1 September 2012
2. A critical component in any component of a life
support, device, or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
www.aosmd.com
Page 12 of 12
Similar pages