ETC2 AP4E300SZBE Industrial pushbutton switch Datasheet

!
NEW
Typical Applications
• Harsh environments
• Off-Road
• Industrial
• Medical
• Transportation
• Joystick control modules
• Gaming
• Military
A
Pushbutton
Features/Benefits
• IP67 sealed
• 1,000,000 life cycle
• Illumination / non-illumination
• Multiple colored caps
• Threaded or snap-in mounting
• SPST, normally open
• Caps available separately
• RoHS compliant
AP Series
Industrial Pushbutton Switch
Specifications
Materials
FUNCTION: SPST Momentary, double break
CONTACT ARRANGEMENT: N.O.
MOUNTING TYPE:
Snap-in (panel front) or threaded (nut with locking washer and
panel gasket)
HOUSING: PBT
BASE: PBT
CAP: PBT
ACTUATOR:
Illuminated: Clear polycarbonate
Non-illuminated: PBT
INTERNAL SEAL: Silicone rubber
TERMINALS: Copper alloy, gold over silver plating
MOVABLE CONTACT: Copper alloy, gold over silver plating
TERMINAL SEAL: Epoxy
Mechanical
TOTAL TRAVEL: 2.1 ± 0.2 mm
OPERATING POINT 1.55 ± 0.25 mm
OVER TRAVEL: 0.6 ± 0.2 mm
OPERATING FORCE: 4N ± 0.5N standard configuration; other
force option 2N ± 0.5N
VIBRATION: 10-500 Hz 10g Max
SHOCK: 60g 11ms sawtooth wave
Operating Environment
OPERATING TEMPERATURE: -40˚C to 85˚C (+105˚C non-illuminated)
OPERATING LIFE: 1,000,000 cycles
Electrical
CONTACT RATING:
200mA @ 24 V DC resistive
100mA @ 50 V DC resistive
400mA @ 32 V AC resistive
125mA @ 125 V AC resistive
DIELECTRIC STRENGTH: 1000 V AC min.
INSULATION RESISTANCE: 1 G Ω @ 500 VDC
INITIAL CONTACT RESISTANCE 50 mΩ max (without wire leads)
BOUNCE TIME: <5 ms
Process Environment
SEALING: IP67
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, please contact Customer Service.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box.
A
P
B
E
Designation
AP Series
AP
Terminal Seal
Epoxy
E
All models are epoxy sealed
Operating Force
2 Newtons
2
4
4 Newtons
Contact Material
B
Gold
Actuator Style
Dome / Convex
D
C
Concave
E
Extended Dome
N
None
Please contact Customer
Service for additional colors
and paint / laser etched
button options.
Actuator Color
0
No Cap
2
Black
3
Red
4
Orange
5
Yellow
6
Green
Illumination
00
No LED*
01
Super White
02
Bi-color; Red (Green)
03
Red
05
Amber
06
Green
07
Super Blue
08
Bi-color; Amber (Green)
* No LED available in short body only
Termination
Z
Solder Lug
W
12” Wire Leads 22 AWG
C**** PC Terminals
Bushing Style**
S
Snap-in plastic
T***
Threaded plastic
Metal threaded bushing available, contact
Customer Service
***
T bushing style includes: 1 lockwasher, 1 hex nut & 1
panel seal washer
**** Illumination not available with PC Terminals
Contact Customer Service for additional hardware options.
**
Specifications and dimensions subject to change
A–3
www.ck-components.com
!
NEW
AP Series
Industrial Pushbutton Switch
STANDARD VIEW
Pushbutton
A
28,00
[ 1.102 ]
ELECTRICAL SCHEMATIC
10,90
[ 0.429 ]
ø 12,35
[0.486]
ø 17,40
[0.685]
4
4,20
[ 0.165 ]
1,50
[ 0.059 ]
1
3,90
[ 0.154 ]
3
8,80
[ 0.346 ]
5,45
[ 0.215 ]
7,74
[ 0.305 ]
1
2
4
2
3
SPST-NO
SEE SCHEMATIC
4,50
[ 0.177 ]
OPERATING FORCE
OPTION
CODE
OPERATING FORCE
2
4
2 N, 200 g
4 N, 400 g
ACTUATOR STYLE
D
E
DOME / CONVEX
C
EXTENDED DOME
3,54
TYP
[ 0.140 ]
0,65
[ 0.026 ]
3,54
TYP
[ 0.140 ]
8,19
TYP
[ 0.323 ]
7,74
TYP
[ 0.305 ]
7,74
TYP
[ 0.305 ]
1,64
TYP
[ 0.065 ]
CONCAVE
1,64
TYP
[ 0.065 ]
3,99
TYP
[ 0.157 ]
2,09
TYP
[ 0.082 ]
DOWN POSITION
ACTUATOR COLOR
OPTION
CODE
ACTUATOR COLOR
0
2
3
4
5
6
No Cap
Black
Red
Orange
Yellow
Green
For additional colors please contact Customer
Service.
Third Angle
Projection
Dimensions are shown: mm (inches)
Specifications and dimensions subject to change
A–4
www.ck-components.com
!
NEW
AP Series
Industrial Pushbutton Switch
ILLUMINATION
A
ILLUMINATION
TYPE
TYPICAL INTENSITY*
MIN
MAX
PEAK
WAVELENGTH
00
Model without illumination
01
LED Super White
4,000
5,000
02
LED Bi-Color – Red (Green)
10
20
03
LED Red
4
8
700
2.0
05
LED Amber
35
50
610
2.0
06
LED Green
35
50
565
2.0
(mcd)
Vf Forward Voltage
(nm)
N/A
N/A
3.5
N/A
2.0
635/565
07
LED Super Blue
800
1,500
470
3.8
08
LED Bi-Color – Amber (Green)
10
10
585/565
2.0
+ Anode
- Cathode
*LED FORWARD CURRENT: 20 mA
LED FORWARD VOLTAGE: see chart above
LED REVERSE VOLTAGE: 5.0 V MAX
* For information on specific and custom LED, please contact Customer Service.
NOTE:
4
3
For bi-color LED’s the polarity must be reversed to alternate the color
BUSHING STYLE
S
SNAP-IN
28,00
[ 1.102 ]
24,00
[ 0.945 ]
20,25
[ 0.797 ]
7,74
[ 0.305 ]
SNAP-IN
NO ILLUMINATION
SNAP-IN
WITH ILLUMINATION
1,50
[ 0.059 ]
T
16,25
[ 0.640 ]
7,75
[ 0.305 ]
1,50
[ 0.059 ]
THREADED PLASTIC
M13 X 1.25-6g
THREADED WITH
ILLUMINATION
M13 X 1.25-6g
THREADED
NO ILLUMINATION
0,85
[ 0.033 ]
0,85
[ 0.033 ]
PANEL CUTOUT
øA
B
PANEL THICKNESS
1 mm
[0.039 in]
2 mm
[0.079 in]
3 mm
[0.118 in]
THREADED BODY
MIN PANEL THICKNESS 1 mm
DIM A (± 0.05 mm)
13.70 mm
[0.539 in]
13.80 mm
[0.539 in]
13.90 mm
[0.547 in]
13.70 mm
[0.539 in]
DIM B (± 0.05 mm)
13.00 mm
[0.512 in]
13.00 mm
[0.512 in]
13.10 mm
[0.516 in]
13.00 mm
[0.512 in]
A 0.1mm min. chamfer on the leading edge of the mounting hole is recommended for snap-in version.
A–5
Third Angle
Projection
Dimensions are shown: mm (inches)
Specifications and dimensions subject to change
www.ck-components.com
Pushbutton
OPTION
CODE
!
NEW
AP Series
Industrial Pushbutton Switch
TERMINATION
Pushbutton
A
Z
SOLDER LUG
LED TERMINAL
CATHODE (-)
3,90
[0.154]
0,75 TYP
[0.030]
LED TERMINAL
ANODE (+)
0,50 TYP
[0.020]
6,44 TYP
[0.254]
2,75
[0.108]
2,83 TYP
[0.111]
2,83 TYP
[0.111]
0,50 TYP
[0.020]
LED TERMINAL
ANODE (+)
2,04 TYP
[0.080]
LED TERMINAL
CATHODE (-)
5,65 TYP
[0.222]
C
PC TERMINALS
**** Illumination not available with PC Terminals
2,50 TYP
[0.098]
0,50
[0.020]
0,70
[0.028]
5,65 TYP
[0.222]
5,70
[0.224]
2X ø 1,00
[0.039]
PCB HOLE PATTERN
BOARD VIEW
W
34,78 TYP
[1.369]
12” WIRE LEADS 22 AWG
28,44 TYP
[1.120]
27,04 TYP
[1.065]
20,69 TYP
[0.815]
WIRE LEADS WITH
POTTED BASE,
SNAP-IN
NO ILLUMINATION
WIRE LEADS WITH
POTTED BASE,
SNAP-IN
ILLUMINATION
ø 11,11
[0.437]
304,81
[12.000]
WIRELEADS
22 AWG STD
ø 11,11
[0.437]
304,81
[12.000]
WIRELEADS
22 AWG STD
WIRE LEADS WITH
POTTED BASE,
THREADED
NO ILLUMINATION
WIRE LEADS WITH
POTTED BASE,
THREADED
ILLUMINATION
304,81
[12.000]
WIRELEADS
22 AWG STD
304,81
[12.000]
WIRELEADS
22 AWG STD
Third Angle
Projection
Dimensions are shown: mm (inches)
Specifications and dimensions subject to change
A–6
www.ck-components.com
!
NEW
AP Series
Industrial Pushbutton Switch
CONTACT MATERIAL
GOLD
A
Pushbutton
B
OPTION
CODE
CONTACT MATERIAL
Gold
B
TERMINAL SEAL
E
EPOXY
All models are epoxy sealed
HARDWARE
LOCK WASHER
Part Number 647D00000
HEX NUT
2.50
Part number 515D00000
ø17.25
17.32 REF
ø15.00
M13 X 1.25-6H
13.82
0.77
15.00
PANEL SEAL
Part Number 655D00000
See Detail A
4X 0.13
0.30
Detail A
Scale 15:1
4X R 0.13 REF
0.56 REF
2 X ø 14.60
2 X ø 16.30
ø 17.00
ø 13.80
A
A
Caps available on next page
Third Angle
Projection
Dimensions are shown: Inches
mm (inches)
(mm)
Specifications and dimensions subject to change
A-7
www.ck-components.com
!
NEW
AP Series
Industrial Pushbutton Switch
AVAILABLE CAPS
Pushbutton
A
481
X
Cap
Actuator Style
Cap Color
XX 00X
Hole / No Hole
OPTION
CAP COLOR
PART NUMBER
HOLE
02
BLACK
481DXX000
NO
03
RED
481DXX001
YES
DOME
04
ORANGE
481CXX000
NO
CONCAVE
05
YELLOW
481CXX001
YES
06
GREEN
481EXX000
NO
EXTENDED DOME
481EXX001
YES
EXTENDED DOME
ACTUATOR STYLE
DOME
CONCAVE
ø 12.35
D
ø 3.00
THRU HOLE
DOME
6.25
6.10
ø 12.35
C
ø 3.00
THRU HOLE
CONCAVE
0.65
0.61
6.69
6.69
E
ø12.35
EXTENDED DOME
ø 3.00
THRU HOLE
6.15
6.10
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
A–8
www.ck-components.com
Similar pages