3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APA3010RWF/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. Features It is recommended to use a wrist band or anti-electrostatic z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm THICKNESS. glove when handling the LEDs. z LOW POWER CONSUMPTION. All devices, equipment and machinery must be electrically z WIDE VIEWING ANGLE. grounded. z IDEAL FOR BACK LIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z ELECTROSTATIC z TYP. DISCHARGE THRESHOLD (HBM):1000V. COLOR TEMPERATURE:6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL z COLOR z Applications z traffic signaling. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micro incandescent lamps. z Reading camps. z signal and symbol luminaire for orientation. EFFICIENCY:8.8 lm/W(TYP.) REPRODUCTION INDEX:80 RoHS COMPLIANT. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 1 OF 7 ERP: 1203005366 Selection Guide Note2 Dice Part No. APA3010RWF/A luminous Intensity Iv(mcd) @ 20 mA Lens Type Note3 Φv (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2 θ 1/2 50 150 560 120 ° WHITE (InGaN) YELLOW FLUORESCENT Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 350 120 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1 .θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 Note1 Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage Unit 0.31 - 0.31 - 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) Value 3.2 4.0 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] μA 10 Temperature coefficient of x IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TC x -0.1 10-3 / ° C Temperature coefficient of y IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCy -0.2 10-3 / ° C Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCV -2.5 mV/ ° C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 2 OF 7 ERP: 1203005366 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA Φv (mlm) @ 20 mA Code. Min. Max. Typ. H 50 90 200 M 70 130 300 N 110 220 480 P 180 320 710 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APA3010RWF/A SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 3 OF 7 ERP: 1203005366 APA3010RWF/A SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 4 OF 7 ERP: 1203005366 APA3010RWF/A White CIE 0.44 0.42 0.40 c1 0.38 0.36 b4 c0 0.34 b1 b3 0.32 b2 0.30 a1 0.28 a0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 a1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 X 0.283 0.330 0.330 0.287 X 0.287 0.330 0.330 0.296 Y 0.305 0.360 0.339 0.295 Y 0.295 0.339 0.318 0.276 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 5 OF 7 ERP: 1203005366 APA3010RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 6 OF 7 ERP: 1203005366 PACKING & LABEL SPECIFICATIONS APA3010RWF/A SPEC NO: DSAG3639 REV NO: V.6 DATE: JUN/01/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Z.Z.YANG PAGE: 7 OF 7 ERP: 1203005366