Anpec APL108625GC-TRG 1.5a low dropout fast response positive adjustable regulator and fixed 1.8v, 2.5v, 2.85v, and 3.3v Datasheet

APL1086
1.5A Low Dropout Fast Response Positive Adjustable Regulator and Fixed
1.8V, 2.5V, 2.85V, and 3.3V
Features
•
•
•
•
•
•
•
•
•
•
Improving Ripple Rejection
APL1086
Guaranteed Output Voltage Accuracy within 2%
VIN
IN
+
Fast Transient Response
10µ F
OUT
ADJ
Guaranteed Dropout Voltage at Multiple Currents
R2
Load Regulation : 0.1% Typ.
+
365Ω
150µ F
C1
10µ F
1%
Line Regulation : 0.03% Typ.
* C1 improves ripple rejection.
XC should be approximately
equal to R1 at ripple frequency
Low Dropout Voltage : 1.3V Typ. at IOUT =1.5A
Current Limit : 1.5A Min. at TJ=125 °C
On-Chip Thermal Limiting : 150 °C Typ.
•
VOUT
R1
121Ω
1%
Adjustable Output : 1.25~10.7V
General Description
Standard 3-pin SOT-223, TO-252 , TO-220, and
The APL1086 is a low dropout three-terminal adjustable
TO-263 Power Packages
regulators with 1.5A output current capability. In order to
obtain lower dropout voltage and faster transient
Lead Free and Green Devices Available
response, which is critical for low voltage applications,
the APL1086 has been optimized.
(RoHS Compliant)
Simplified Application Circuits
The device is available in an adjustable version and fixed
output voltages of 1.8V, 2.5V, 2.85V, and 3.3V, the output
available voltage range is from 1.25 to 10.7V with an input
1.25V to 10.7V Adjustable Regulator
supply below 12V. Dropout voltage is guaranteed at a
APL1086
VIN
IN
OUT
maximum of 1.45V at 1.5A.
VOUT1
R1
ADJ
Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal
121Ω
+
100µ F
C2
+
10µ F
C1*
limiting provides protection against any combination of
overload tha t would create excessi ve junc tion
R2
1k
temperatures.
The APL1086 is available in the industry standard 3-pin
SOT-223, TO-252, TO-220, or TO-263 power packages.
* Needed if device is far from filter capacitors
V OUT = 1.250V ×
R1 + R2
R1
5V Regulator with Shutdown
Applications
APL1086
VIN
IN
OUT
ADJ
+
10µ F
•
•
•
•
5V
121Ω
1%
+
1k
100µ F
TTL
1k
365Ω
1%
Active SCSI Terminators
Low Voltage Logic Supplies
Battery-Powered Circuitry
Post Regulator for Switching Power Supply
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
1
www.anpec.com.tw
APL1086
Ordering and Marking Information
Package Code
F : TO-220
G : TO-263
U : TO-252
V : SOT-223
Operating Ambient Temperature Range
C : 0 to 70 oC
Handling Code
TU : Tube
TR : Tape & Reel
Voltage Code
18 : 1.8V
25 : 2.5V
285 : 2.85V
Blank : Adjustable Version
Assembly Material
G : Halogen and Lead Free Device
APL1086 Assembly Material
Handling Code
Temperature Range
Package Code
Voltage Code
APL1086 F/G/U :
APL1086
XXXXX
33 : 3.3V
XXXXX
- Date Code
APL1086 V :
APL1086
XXXXX
XXXXX - Date Code
APL1086 -18F/G/U:
18
APL1086
XXXXX
XXXXX
- Date Code
APL1086- 18V :
APL1086
XXXXX18
XXXXX - Date Code
APL1086 -25F/G/U:
25
APL1086
XXXXX
XXXXX
- Date Code
APL1086- 25V :
APL1086
XXXXX25
XXXXX - Date Code
APL1086 -285F/G/U:
285
APL1086
XXXXX
XXXXX
- Date Code
APL1086
XXXXX285
XXXXX - Date Code
APL1086 -33F/G/U:
33
APL1086
XXXXX
XXXXX
- Date Code
APL1086
XXXXX33
XXXXX - Date Code
APL1086- 285V :
APL1086- 33V :
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Pin Configurations
TAB IS VOUT
1
ADJ/GND
TAB IS VOUT
2
3
OUT
IN
Front View for SOT-223
1
ADJ/GND
2
OUT
3
VIN
2
VOUT
1
ADJ
Front View for TO-220
3
IN
TAB is VOUT
Front View for TO-252
3
VIN
2
VOUT
1
ADJ
Front View for TO-263
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
2
www.anpec.com.tw
APL1086
Absolute Maximum Ratings
Symbol
VI
(Note 1,2)
Parameter
Rating
Unit
15
V
SOT-223
TO-252
1.7
2
W
SOT-223
TO-252
60
50
°C/W
0 to 150
°C
-65 to +150
°C
260
°C
Input Voltage
Power Dissipation, TA=25°C
PD
Thermal Resistance from Junction to Ambient in Free Air
θJA
TJ
TSTG
TL
Operating Junction Temperature Range
Storage Temperature Range
Maximum Lead Soldering Temperature, 10 Seconds
Note 1: Stresses beyond the absolute maximum rating may damage the device and operating in the absolute maximum rating conditions
may affect device reliability.
Note 2: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using:
P D (max) = (T J – T A) / θJA; TJ = 125°C. Exceeding the maximum allowable power dissipation will result in excessive die
temperature.
Electrical Characteristics
APL1086
Symbol
VREF
Parameter
Reference Voltage
Test Conditions
10mA≤ IOUT≤1.5A,
1.4V≤(VIN -VOUT) ≤9.75V, TJ =0~125°C
Unit
Min.
Typ.
Max.
1.225
1.250
1.275
1.782
1.764
1.800
1.800
1.818
1.836
2.475
2.450
2.500
2.500
2.525
2.550
V
Output Voltage
TJ =25°C, IOUT =0mA,
APL1086-18 TJ =0~125°C,
0≤ IOUT≤ 1.5A, 3.5V≤VIN≤9V,
VOUT
TJ =25°C, IOUT =0mA,
APL1086-25 TJ =0~125°C,
0≤ IOUT≤ 1.5A, 4V≤VIN≤9V,
TJ =25°C, IOUT =0mA,
APL1086-28 TJ =0~125°C,
0≤ IOUT≤ 1.5A, 4.25V≤VIN≤9V,
TJ =25°C, IOUT =0mA,
APL1086-33 TJ =0~125°C,
0≤ IOUT≤ 1.5A, 4.75V≤VIN≤9V,
Line Regulation
TJ =0~125°C
APL1086 IOUT=10mA, 1.5V≤VIN –VOUT≤9V (Note3)
Load Regulation
REGLOAD
2.822
2.792
2.850
2.850
2.878
2.910
3.267
3.235
3.3003.
300
3.333
3.365
-
0.03
0.2
-
1
6
APL1086-25 IOUT=0A, 4V≤VIN≤9V (Note3)
-
1
6
APL1086-28 IOUT=0A, 4.25V≤VIN ≤9V
(Note3)
-
1
6
APL1086-33 IOUT=0A, 4.75V≤VIN≤ 9V (Note3)
-
1
6
APL1086-18 IOUT=0mA, 3.5V≤VIN≤9V
REGLINE
V
(Note3)
TJ =0~125°C
APL1086 (VIN -VOUT)=3V, 0≤ IOUT ≤1.5A (Note3)
-
0.1
0.4
APL1086-18 VIN =3.5V, 0≤ IOUT ≤1.5A (Note3)
-
1
10
APL1086-25 VIN =4V, 0≤ IOUT ≤1.5A (Note3)
-
1
10
APL1086-28 VIN =4.25V, 0≤ IOUT≤1.5A
(Note3)
-
1
10
APL1086-33 VIN =4.75V, 0≤ IOUT ≤1.5A (Note3)
-
1
10
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
3
%
mV
%
mV
www.anpec.com.tw
APL1086
Electrical Characteristics (Cont.)
APL1086
Symbol
VD
ILIMIT
IADJ
∆IADJ
Parameter
Test Conditions
Typ.
Max.
-
1.3
1.45
V
1500
-
-
mA
-
60
120
µA
-
0.2
5
µA
-
1.7
-
mA
60
75
-
dB
-
0.01
0.02
%/ W
-
0.5
-
%
TJ =125°C,1000Hrs.
-
0.3
-
%
%
Dropout Voltage
IOUT=1.5A ,TJ =0~125°C (Note4)
Current Limit
(VIN -VOUT)=5V, TJ =25°C
Adjust Pin Current
Adjust Pin Current Change
Unit
Min.
(VIN -VOUT)=3V, IOUT=10mA,
TJ =0~125°C
TJ=0~125°C, 10mA≤ IOUT ≤1.5A,
1.4V≤( VIN -VOUT) ≤7.75V
Minimum Load Current
TJ =0~125°C, (VIN -VOUT)=7.75V, (Note 5)
Ripple Rejection
FRIPPLE=120Hz, VRIPPLE=1VP-P,
(VIN -VOUT)=3V, TJ =0~125°C
TR
Thermal Regulation
TJ =25°C, 30ms Pulse
TS
Temperature Stability
LS
Long -Term Stability
VN
RMS Output Noise
TJ=25°C,10Hz≤F≤10kHz, (% of VOUT)
-
0.003
-
θJC
Thermal Resistance from
Junction to Case
at Tab, SOT-223
-
15
-
at Tab, TO-252
-
6
-
OT
Over Temperature Point
-
150
-
Quiescent Current
TJ=0~125°C,
APL1086-18 VIN≤9V
-
IO
PSRR
5.5
10
APL1086-25 VIN≤9V
-
5.5
10
APL1086-28 VIN≤9V
-
5.5
10
APL1086-33 VIN≤9V
-
5.5
10
°C/ W
°C
mA
Note 3: See thermal regulation specifications for changes in output voltage due to heating effects. Load line regulations are
measured at a constant junction temperature by low duty cycle pulse testing.
Note 4: Dropout voltage is specified over the full output current range of the device. Dropout voltage is defined as the minimum input/
output differential measured at the specified output current. Test points and limits are also shown on the Dropout Voltage curve.
Note 5: Minimum load current is defined as the minimum output current required to maintain regulation.
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
4
www.anpec.com.tw
APL1086
Typical Operating Characteristics
Load Transient Response
6
0.01
5
Output Current (A)
3.5
0
3
2.5
2
-0.01
1.5
1
-0.02
0.5
0.15
0.1
CIN=10µF
Cout=10µF Tantalum
IOUT=0.1A
4
3
0.05
2
0
1
0
0 -0.03
0 100 200 300 400 500 600 700 800 900
100
-20
30
Time (µs)
-0.05
180
130
80
Output Voltage Deviation (V)
4
0.02
Input Voltage (V)
CIN=10µF
Cout=10µF Tantalum
VIN=5V
Output Voltage Deviation (V)
5
4.5
Line Transient Response
Time (µs)
Output Voltage vs. Input Voltage
Dropout Voltage vs. Output Current
1.35
3.5
1.3
3
1.2
Output Voltage (V)
Dropout Voltage (V)
1.25
1.15
1.1
1.05
1
2.5
2
1.5
1
0.5
0.95
0.9
0
0
0.5
1
0
1.5
Output Current (A)
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
1
2
3
4
5
6
7
8
9
Input Voltage (V)
5
www.anpec.com.tw
APL1086
Typical Operating Characteristics (Cont.)
Input Current vs. Input Voltage
Current Limit vs. Input Voltage
3.4
6
Vout=1.25V
2.9
4
Current Limit (A)
Input Current (mA)
5
3
2
1.9
1.4
1
0
2.4
0
2
4
6
8
0.9
10
0
3
6
9
12
Input Voltage (V)
Input Voltage (V)
Output Voltage vs. Temperature
Output Voltage vs. Temperature
2.6
3.4
2.5
3.3
2.3
Output Voltage (V)
Output Voltage (V)
2.4
2.2
2.1
2
1.9
1.8
3.2
3.1
3.0
2.9
2.8
1.7
1.6
-50
-25
0
25
50
75
100
2.7
-50
125
0
25
50
75
100
125
Temperature (°C)
Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
-25
6
www.anpec.com.tw
APL1086
Typical Operating Characteristics (Cont.)
Adjustable Pin Current vs. Temperature
Input Current vs. Temperature
68
8
64
Input Current (mA)
Adjustable Pin Current (µA)
7
60
56
6
5
4
3
52
-50
2
-25
0
25
50
75
100
125
-50
-25
0
25
50
75
100
125
Temperature (°C)
Temperature (°C)
Current Limit vs. Temperature
2.9
Current Limit (mA)
2.7
Vin-Vout=5V
2.5
2.3
2.1
1.9
1.7
1.5
-50 -30 -10 10
30 50 70 90 110 130 150
Temperature (°C)
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
7
www.anpec.com.tw
APL1086
Package Information
SOT-223
D
b2
E
E1
SEE
VIEW A
e
c
0.25°
L
b
0
A
A1
A2
e1
GAUGE PLANE
SEATING PLANE
VIEW A
S
Y
M
B
O
L
SOT-223
MILLIMETERS
MIN.
INCHES
MAX.
A
MIN.
MAX.
1.80
0.071
A1
0.02
0.10
0.001
0.004
A2
1.50
1.70
0.059
0.067
b
0.66
0.84
0.026
0.033
b2
2.90
3.10
0.114
0.122
c
0.23
0.33
0.009
0.013
D
6.30
6.70
0.248
0.264
E
6.70
7.30
0.264
0.287
E1
3.30
3.70
0.130
0.146
e
2.30 BSC
e1
L
0
0.091 BSC
4.60 BSC
0.181 BSC
0.030
0.75
0°
0°
10 °
10 °
Note : 1. Follow from JEDEC TO-261 AA.
2. Dimension D and E1 are determined at the outermost extremes
of the plastic exclusive of mold flash, tie bar burrs, gate burrs,
and interlead flash, but including any mismatch between the top
and bottom of the plastic body.
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
8
www.anpec.com.tw
APL1086
Package Information
TO-252-3
E
A
E1
c2
L4
H
D
D1
L3
b3
c
b
e
SEE VIEW A
0
GAUGE PLANE
SEATING PLANE
0.25
A1
L
VIEW A
TO-252-3
S
Y
M
B
O
L
MIN.
MAX.
MIN.
MAX.
A
2.18
2.39
0.086
0.094
MILLIMETERS
INCHES
0.005
0.13
A1
b
0.50
0.89
0.020
0.035
b3
4.95
5.46
0.195
0.215
0.024
c
0.46
0.61
0.018
c2
0.46
0.89
0.018
0.035
D
5.33
6.22
0.210
0.245
D1
4.57
6.00
0.180
0.236
E
6.35
6.73
0.250
0.265
E1
3.81
6.00
0.150
0.236
9.40
10.41
0.370
0.410
L
0.90
1.78
0.035
0.070
L3
0.89
2.03
0.035
0.080
e
H
2.29 BSC
L4
0
0.090 BSC
0.040
1.02
0°
8°
0°
8°
Note : Follow JEDEC TO-252 .
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
9
www.anpec.com.tw
APL1086
Package Information
TO-220
E
A
E2
A1
E1
H1
Q
E/2
L
L1
D1
D
D2
P
b
e
A2
c
b2
S
Y
M
B
O
L
A
A1
TO-220
MILLIMETERS
INCHES
MIN.
MAX.
MIN.
MAX.
3.56
4.83
0.140
0.190
0.51
1.40
0.020
0.055
0.080
0.115
A2
2.03
2.92
b
0.38
1.02
0.015
0.040
b2
1.14
1.78
0.045
0.070
c
D
0.36
0.61
0.014
0.024
16.51
0.560
0.650
D1
14.22
8.38
0.330
0.355
D2
12.19
9.02
12.88
0.480
0.507
E
9.65
10.67
0.380
0.420
E1
6.86
8.89
0.270
0.350
0.030
0.76
E2
e
2.54 BSC
0.100 BSC
H1
5.84
6.86
0.230
0.270
L
12.70
14.73
0.500
0.580
0.250
6.35
L1
P
3.53
4.09
0.139
0.161
Q
2.54
3.43
0.100
0.135
Note: Follow JEDEC TO-220 AB.
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
10
www.anpec.com.tw
APL1086
Package Information
TO-263-3
A
E1
c2
L2
H
D
D1
L1
E
b
b2
c
e
SEE VIEW A
0
GAUGE PLANE
SEATING PLANE
S
Y
M
B
O
L
A
A1
A1
0.25
L
VIEW A
TO-263
MILLIMETERS
INCHES
MIN.
MAX.
MIN.
MAX.
4.06
4.83
0.160
0.190
0.00
0.25
0.000
0.010
b
0.51
0.99
0.020
0.039
b2
1.14
1.78
0.045
0.070
c
0.38
0.74
0.015
0.029
c2
1.14
1.65
0.045
0.065
D
8.38
9.65
0.330
0.380
D1
6.00
9.00
0.236
0.354
E
9.65
11.43
0.380
0.450
E1
6.22
9.00
0.245
0.354
15.88
0.575
0.625
2.79
0.070
0.110
e
2.54 BSC
H
14.61
L
1.78
0.100 BSC
L1
1.68
L2
1.78
θ
0
o
0.066
0.070
0o
o
8
8o
Note : Follow JEDEC TO-263 AB.
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
11
www.anpec.com.tw
APL1086
Carrier Tape & Reel Dimensions
P0
P2
P1
A
B0
W
F
E1
OD0
K0
A0
A
OD1 B
B
T
SECTION A-A
SECTION B-B
H
A
d
T1
Application
A
H
330.0±
2.00 50 MIN.
TO-263
P0
T1
C
d
D
W
E1
F
24.4+2.00 13.0+0.50
0.10 11.5±0.10
-0.00
-0.20 1.5 MIN. 20.2 MIN. 24.0±0.30 1.75±
P1
P2
4.0±0.10 16.0±0.10 2.0±0.10
Application
A
H
330.0±
2.00 50 MIN.
TO-252
Application
SOT-223
P1
P2
4.0±0.10
8.0±0.10
2.0±0.05
A
H
P0
D1
1.5 MIN.
T
A0
B0
K0
0.6+0.00
0.20 5.2±0.20
-0.40 10.8±0.20 16.1±
T1
C
d
D
W
E1
F
16.4+2.00 13.0+0.50
0.10 7.50±0.05
-0.00
-0.20 1.5 MIN. 20.2 MIN. 16.0±0.30 1.75±
P0
320.0±
2.00 50 MIN.
D0
1.5+0.10
-0.00
D0
1.5+0.10
-0.00
D1
1.5 MIN.
T
A0
B0
K0
0.6+0.00
-0.40 6.80±0.20 10.40±0.20 2.50±0.20
T1
C
d
D
W
E1
F
12.4+2.00 13.0+0.50
0.10 5.50±0.05
-0.00
-0.20 1.5 MIN. 20.2 MIN. 12.00±0.30 1.75±
P1
P2
D0
1.5+0.10
4.00±
0.10 8.00±0.10 2.00±0.50
-0.00
D1
1.5 MIN.
T
A0
B0
K0
0.6+0.00
0.20 2.10±0.20
-0.40 6.90±0.20 7.50±
(mm)
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
(
12
www.anpec.com.tw
(
APL1086
Devices Per Unit
Package Type
TO-263
TO-252
SOT-223
Unit
Tape & Reel
Tape & Reel
Tape & Reel
Quantity
800
2500
2500
Taping Direction Information
TO-263
USER DIRECTION OF FEED
TO-252
USER DIRECTION OF FEED
SOT-223
USER DIRECTION OF FEED
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
13
www.anpec.com.tw
APL1086
Reflow Condition
(IR/Convection or VPR Reflow)
tp
TP
Critical Zone
T L to T P
Temperature
Ramp-up
TL
tL
Tsmax
Tsm in
Ramp-down
ts
Preheat
t 25 °C to Peak
25
Tim e
Reliability Test Program
Test item
SOLDERABILITY
HOLT
PCT
TST
ESD
Latch-Up
Method
MIL-STD-883D-2003
MIL-STD-883D-1005.7
JESD-22-B,A102
MIL-STD-883D-1011.9
MIL-STD-883D-3015.7
JESD 78
Description
245°C, 5 sec
1000 Hrs Bias @125°C
168 Hrs, 100%RH, 121°C
-65°C~150°C, 200 Cycles
VHBM > 2KV, VMM > 200V
10ms, 1tr > 100mA
Classification Reflow Profiles
Profile Feature
Average ramp-up rate
(TL to TP)
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (min to max) (ts)
Time maintained above:
- Temperature (TL)
- Time (tL)
Peak/Classification Temperature (Tp)
Time within 5°C of actual
Peak Temperature (tp)
Ramp-down Rate
Sn-Pb Eutectic Assembly
Pb-Free Assembly
3°C/second max.
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
183°C
60-150 seconds
217°C
60-150 seconds
See table 1
See table 2
10-30 seconds
20-40 seconds
6°C/second max.
6°C/second max.
6 minutes max.
Time 25°C to Peak Temperature
Notes: All temperatures refer to topside of the package. Measured on the body surface.
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
14
8 minutes max.
www.anpec.com.tw
APL1086
Classification Reflow Profiles (Cont.)
Table 1. SnPb Eutectic Process – Package Peak Reflow Temperatures
Package Thickness
Volume mm3
<350
<2.5 mm
240 +0/-5°C
≥2.5 mm
225 +0/-5°C
Volume mm3
≥350
225 +0/-5°C
225 +0/-5°C
Table 2. Pb-free Process – Package Classification Reflow Temperatures
Package Thickness
Volume mm3
Volume mm3
Volume mm3
<350
350-2000
>2000
<1.6 mm
260 +0°C*
260 +0°C*
260 +0°C*
1.6 mm – 2.5 mm
260 +0°C*
250 +0°C*
245 +0°C*
≥2.5 mm
250 +0°C*
245 +0°C*
245 +0°C*
*Tolerance: The device manufacturer/supplier shall assure process compatibility up to and including the stated
classification temperature (this means Peak reflow temperature +0°C. For example 260°C+0°C) at the rated MSL
level.
Customer Service
Anpec Electronics Corp.
Head Office :
No.6, Dusing 1st Road, SBIP,
Hsin-Chu, Taiwan, R.O.C.
Tel : 886-3-5642000
Fax : 886-3-5642050
Taipei Branch :
2F, No. 11, Lane 218, Sec 2 Jhongsing Rd.,
Sindian City, Taipei County 23146, Taiwan, R. O. C.
Tel : 886-2-2910-3838
Fax : 886-2-2917-3838
Copyright  ANPEC Electronics Corp.
Rev. A.8 - Dec., 2008
15
www.anpec.com.tw
Similar pages