APT1 VDE Phototriac coupler ideal for triac driver with wide variation APT Phototriac Coupler FEATURES TYPICAL APPLICATIONS 1. Low zero-cross voltage (max. 15 V) type added to lineup. Approximately 1/3 of previous product Helps reduce device noises even further. 1. For triac driver in heater controls of products such as office equipment, home appliances, and industrial machines. (For 100V/200V, 50/60 Hz lines) 2. Triac driver for SSRs Previous product: max. 50 V Load voltage New product: max. 15 V High noise Low noise Large interfering wave 1 4 1 Small interfering wave 6 2 2 ZC Zero-cross circuit 3 1 4 2 3 3 ZC Zero-cross circuit 1 2. Two types available: Random type and zero-cross type 3. Many package sizes available. (Wide terminal type with 10.16 mm pitch between I/O terminals available.) 4. High dielectric strength. (Between input and output: SOP 3, 750 V; DIP 5,000 V) 5. Handles both 100 and 200 V AC loads This relay handles both voltages in a single product it is not necessary for users that use both types to manage separate part numbers. 6. Terminal 5 of the DIP 6-pin type is completely molded. 4 6 2 3 4 RoHS compliant TYPES 1. SOP4 Type Type Output rating Repetitive peak ON-state RMS OFF-state voltage current Type Package size Zero-cross (max. 50 V) AC type 600 V 50 mA Zero-cross (max. 15 V) Random SOP4pin Part No. Tube packing style Packing quantity Tape and reel packing style APT1211S APT1211SX (Picked from the 1/2-pin side) APT1211SZ (Picked from the 3/4-pin side) APT1231S APT1231SX (Picked from the 1/2-pin side) APT1231SZ (Picked from the 3/4-pin side) APT1221S APT1221SX (Picked from the 1/2-pin side) APT1221SZ (Picked from the 3/4-pin side) Tube Tape and reel 1 tube contains: 100 pcs. 1 batch contains: 2, 000 pcs. 1, 000 pcs. Note: For space reasons, the initial letters of the product number “APT” and “S” are omitted on the product seal. The package type indicator “X” and “Z” are omitted from the seal. (Ex. the label for product number APT1221SZ is 1221). Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB217E 201201-T1 APT1 2. DIP4/6 Type Output rating Type Repetitive peak OFF-state voltage Part No. ON-state RMS current Type Package size Zero-cross (max. 15 V) DIP4pin Random 600 V Surface-mount terminal Tube packing style Zero-cross (max. 50 V) AC type Through hole terminal Tape and reel packing style APT1211 APT1211A APT1211AX (Picked from the 1/2-pin side) APT1231 APT1231A APT1231AX (Picked from the 1/2-pin side) APT1231AZ (Picked from the 3/4-pin side) APT1221 APT1221A APT1221AX (Picked from the 1/2-pin side) APT1221AZ (Picked from the 3/4-pin side) APT1212 APT1212A APT1212AX (Picked from the 1/2/3-pin side) APT1212AZ (Picked from the 4/6-pin side) APT1232 APT1232A APT1232AX (Picked from the 1/2/3-pin side) APT1232AZ (Picked from the 4/6-pin side) APT1222 APT1222A APT1222AX (Picked from the 1/2/3-pin side) APT1222AZ (Picked from the 4/6-pin side) 100 mA Zero-cross (max. 50 V) Zero-cross (max. 15 V) DIP6pin Random APT1211AZ (Picked from the 3/4-pin side) Packing quantity Tube Tape and reel [DIP4pin] 1 tube contains: 100 pcs. 1 batch contains: 1,000 pcs. [DIP6pin] 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. [DIP4pin] [DIP6pin] 1,000 pcs. Note: For space reasons the initial letters “APT” of the product number for the DIP 4-pin type, the letter “A”, which indicates the SMD terminal shape for the DIP 4-pin and 6-pin types, and the package type indications “X” and “Z” have been omitted from the product label. (Example: The label for product number APT1221AZ is 1221.) 3. DIP4/6 Wide Terminal Type Output rating* Type Repetitive peak OFF-state voltage Part No. ON-state RMS current Type Package size Zero-cross (max. 15 V) DIP4pin Random 600 V Surface-mount terminal Tube packing style Zero-cross (max. 50 V) AC type Through hole terminal APT1211W APT1211WA APT1231W APT1231WA APT1231WAY (Picked from the 1/4-pin side) APT1231WAW (Picked from the 2/3-pin side) APT1221W APT1221WA APT1221WAY (Picked from the 1/4-pin side) APT1221WAW (Picked from the 2/3-pin side) APT1212W APT1212WA APT1212WAY (Picked from the 1/6-pin side) APT1212WAW (Picked from the 3/4-pin side) APT1232W APT1232WA APT1232WAY (Picked from the 1/6-pin side) APT1232WAW (Picked from the 3/4-pin side) APT1222W APT1222WA APT1222WAY (Picked from the 1/6-pin side) APT1222WAW (Picked from the 3/4-pin side) 100 mA Zero-cross (max. 50 V) Zero-cross (max. 15 V) Random DIP6pin Tape and reel packing style APT1211WAY (Picked from the 1/4-pin side) APT1211WAW (Picked from the 2/3-pin side) Packing quantity Tube Tape and reel [DIP4pin] 1 tube contains: 100 pcs. 1 batch contains: 1,000 pcs. [DIP6pin] 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. [DIP4pin] [DIP6pin] 1,000 pcs. Note: For space reasons the initial letters “APT” of the product number for the DIP 4-pin type, the letter “WA”, which indicates the SMD terminal shape for the DIP 4-pin and 6-pin types, and the package type indications “Y” and “W” have been omitted from the product label. (Example: The label for product number APT1221WAY is 1221.) RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) 1) SOP4 types Input Output Item LED forward current LED reverse voltage Symbol IF VR APT1211S, APT1221S, APT1231S 50 mA 6V Peak forward current IFP 1A VDRM 600 V IT(RMS) 0.05 A AC ITSM 0.6 A In one cycle at 60Hz PT Viso 350 mW 3,750 V AC Operating Topr –40°C to +100°C –40°F to +212°F Storage Tstg –40°C to +125°C –40°F to +257°F Repetitive peak OFF-state voltage ON-state RMS current* Non-repetitive surge current Total power dissipation I/O isolation voltage Temperature limits Remarks f = 100 Hz, Duty Ratio = 0.1% Non-condensing at low temperatures Note: “X” and “Z” at the end of the part numbers have been omitted. ASCTB217E 201201-T1 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ APT1 2) DIP4/6 type and DIP4/6 Wide terminal type Input Output Item LED forward current LED reverse voltage Symbol IF VR APT1211(W), APT1221(W), APT1231(W), APT1212(W), APT1222(W), APT1232(W) 50 mA 6V Peak forward current IFP 1A VDRM 600 V IT(RMS) 0.1 A AC ITSM 1.2 A In one cycle at 60Hz PT Viso 500 mW 5,000 V AC Operating Topr –40°C to +100°C –40°F to +212°F Storage Tstg –40°C to +125°C –40°F to +257°F Repetitive peak OFF-state voltage ON-state RMS current* Non-repetitive surge current Total power dissipation I/O isolation voltage Temperature limits Remarks f = 100 Hz, Duty Ratio = 0.1% Non-condensing at low temperatures Note: “A”, “AX”, “AZ” “AY” and “AW” at the end of the part numbers have been omitted. * Do not exceed 0.05 A of ON state RMS current in case of following load voltage condition. DIP4pin (APT1211, APT1221, APT1231) and DIP4pin wide terminal type (APT1211W, APT1221W, APT1231W): more than 100 V AC; DIP6pin (APT1212, APT1222, APT1232) and DIP6pin wide terminal type (APT1212W, APT1222W, APT1232W): more than 120 V AC. 2. Characteristics (Ambient temperature: 25°C 77°F) 1) Zero-cross type (max. 50V) and random type Item LED dropout voltage Input LED reverse current Repetitive peak OFF-state current Output Repetitive peak On-state voltage Holding current Symbol Typical Maximum Typical Maximum Typical Maximum Typical Maximum Typical Maximum VF IR IDRM VTM APT1211S, APT1211(W), APT1212(W) APT1221S, APT1221(W), APT1222(W) Condition 1.21 V IF = 20 mA 1.3 V — VR = 6 V 10 µA — IF = 0 mA VDRM = 600 V 1 µA 1.3 V IF = 10 mA ITM = 0.05 A 2.5 V IH 0.3 mA 3.5 mA Critical rate of rise of OFF-state voltage Minimum dv/dt 500 V/µs Trigger LED current Maximum IFT 10 mA Zero-cross voltage Maximum VZC Maximum Ton 100 µs Maximum Ciso 1.5 pF I/O isolation resistance Minimum Riso 50 GΩ Transfer Turn on time* characteristics I/O capacitance VDRM = 600 V ×1/M2 50 V Notes: 1. For type of connection, see page 41. 2. Terminals are either solder plated or solder dipped. — VD = 6 V RL = 100 Ω IF = 10 mA IF = 20 mA VD = 6 V RL = 100 Ω f = 1 MHz VB = 0 V 500 V DC *Turn on time Input 90% Output Ton Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB217E 201201-T1 APT1 2) Zero-cross type (max. 15V) Item Symbol LED dropout voltage Input LED reverse current Repetitive peak OFF-state current Maximum Typical Maximum Typical Maximum Repetitive peak On-state voltage Output Typical Maximum Typical Maximum Typical Holding current APT1231S, APT1231(W), APT1232(W) 1.21 V 1.3 V — 10 µA — VF IR IDRM IF = 20 mA VR = 6 V IF = 0 mA VDRM = 600 V 1 µA 1.2 V VTM IF = 10 mA ITM = 0.03 A 2V 0.3 mA 3.5 mA IH Critical rate of rise of OFF-state voltage Minimum dv/dt 500 V/µs Trigger LED current Zero-cross voltage Maximum Maximum IFT VZC 10 mA 15 V Maximum Ton 100 µs Maximum Ciso 1.5 pF I/O isolation resistance Minimum Riso 50 GΩ Turn on time* Transfer characteristics I/O capacitance Condition Notes: 1. For type of connection, see page 41. 2. Terminals are either solder plated or solder dipped. VDRM = 600 V ×1/M2 ITM = 0.03 A IF = 10 mA IF = 20 mA ITM = 0.03 A f = 1 MHz VB = 0 V 500 V DC *Turn on time Input 90% Output Ton RECOMMENDED OPERATING CONDITIONS Please follow the conditions below in order to ensure accurate operation and release of the phototriac coupler. Item Input LED current Symbol IF Value 20 Unit mA REFERENCE DATA 1-(1). ON-state RMS current vs. ambient temperature characteristics 1-(2). ON-state RMS current vs. ambient temperature characteristics 1-(3). ON-state RMS current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1211S, APT1221S Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1231S Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1211(A), APT1221(A), APT1211W(A), APT1221W(A) 50 40 30 20 10 ON-state RMS current, mA 60 0 –40 120 70 ON-state RMS current, mA ON-state RMS current, mA 70 60 50 40 30 20 0 20 40 60 80 100 Ambient temperature, °C ASCTB217E 201201-T1 Panasonic Corporation VL 100V AC 80 60 VL > 100V AC 40 20 10 –20 100 0 -40 -20 0 20 40 60 80 100 Ambient temperature, °C Automation Controls Business Unit 0 –40 –20 0 20 40 60 80 Ambient temperature, °C industrial.panasonic.com/ac/e/ 100 APT1 1-(4). ON-state RMS current vs. ambient temperature characteristics 1-(5). ON-state RMS current vs. ambient temperature characteristics 1-(6). ON-state RMS current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1231(A), APT1231W(A) Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1212(A), APT1222(A), APT1212W(A), APT1222W(A) Allowable ambient temperature: –40°C to +100°C –40°F to +212°F Tested sample: APT1232(A), APT1232W(A) 120 100V AC 80 60 VL > 100V AC 40 20 100 120 VL 120V AC 80 60 VL > 120V AC 40 –20 0 20 40 60 80 0 –40 100 –20 0 Ambient temperature, °C 20 40 60 80 APT121❍❍ APT122❍❍ 1.4 APT123❍❍ 8 6 4 80 0 –40 100 –20 Ambient temperature, °C 30 20 10 10 20 30 40 20 40 60 80 50 80 100 50mA 1.2 30mA 20mA 10mA –40 –20 0 20 40 60 80 100 7. Hold current vs. ambient temperature characteristics 2 10–5 10–7 10–9 1.5 1 0.5 10–11 0 20 40 60 80 100 0 –40 –20 0 Load voltage, V LED current, mA 60 Ambient temperature, °C 0.001 10–13 40 1.3 1 100 Hold current, mA 40 0 0 6. Repetitive peak OFF-state current vs. Load voltage characteristics Repetitive peak OFF-state current, A Turn on time, µs 50 20 1.4 Ambient temperature, °C 5. Turn on time vs. LED current characteristics 0 0 1.1 2 60 –20 1.5 1.2 40 VL > 120V AC 40 4. LED dropout voltage vs. ambient temperature characteristics LED dropout voltage, V Trigger LED current, mA 1.6 20 60 Ambient temperature, °C 10 0 80 0 –40 100 3. Trigger LED current vs. ambient temperature characteristics 1.8 –20 120V AC Ambient temperature, °C 2. On voltage vs. ambient temperature characteristics 0 –40 VL 100 20 20 0 –40 On voltage, V ON-state RMS current, mA VL 100 ON-state RMS current, mA ON-state RMS current, mA 120 20 40 60 80 100 Ambient temperature, °C 8. Zero-cross voltage vs. ambient temperature characteristics Zero-cross voltage, V 50 40 30 APT121❍❍ 20 10 0 –40 APT123❍❍ –20 0 20 40 60 80 100 Ambient temperature, °C Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB217E 201201-T1 APT1 DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. SOP Type APT1211S, APT1221S, APT1231S External dimensions CAD Data Recommended mounting pad (TOP VIEW) 0.5 .020 4.4±0.2 .173±009 4.3±0.2 .169±.009 0.4 .016 2.54 .100 0.8 .032 2.54 .100 0.5 .020 2.0±0.2 .079±.009 0.4 .016 6.0 1.2 .236 .047 6.8±0.4 .268±016 Tolerance: ±0.1 ±.004 0.1 .004 Terminal thickness = 0.15 .006 General tolerance: ±0.1 ±.004 2. DIP4 Type APT1211(A), APT1221(A), APT1231(A) CAD Data External dimensions Through hole terminal type Surface mount terminal type Max. 10° 6.4±0.05 .252±.002 7.62±0.05 .300±.002 Max. 10° 6.4±0.05 .252±.002 7.62±0.05 .300±.002 Max. 10° 4.78±0.05 .188±.002 3.2±0.2 .126±.008 2.7±0.05 .106±.002 3.0 .118 0.2 .008 0.33 .013 0.47 .019 1.0 .039 0.47 .019 2.7±0.05 .106±.002 0.2 ±0.2 0 .008 ±.008 0 0.47 .019 1.0 .039 2.54 .100 1.0 .039 4.78±0.05 .188±.002 2.7±0.05 .106±.002 0.47 .019 1.0 .039 2.54 .100 Terminal thickness = 0.20 .008 General tolerance: ±0.1 ±.004 PC board pattern (BOTTOM VIEW) 4-0.8 dia. 4-.031 dia. Recommended mounting pad (TOP VIEW) 2.54 .100 8.3 .327 6.4 .252 7.62 .300 2.54 .100 Tolerance: ±0.1 ±.004 ASCTB217E 201201-T1 Panasonic Corporation Automation Controls Business Unit 1.9 .075 1.5 .059 2.54 .100 Tolerance: ±0.1 ±.004 industrial.panasonic.com/ac/e/ APT1 3. DIP4 Wide Terminal Type APT1211W(A), APT1221W(A), APT1231W(A) External dimensions CAD Data Through hole terminal type Surface mount terminal type Max. 10° Max. 10° 6.4 ±0.05 .252±.002 10.16±0.5 .400±.020 Max. 10° 2.7±0.05 .106±.002 4.78 ±0.05 1.88 ±.002 2.7±0.05 .106±.002 4.78±0.05 .188±.002 0.75 .030 0.2±0.2 .008±.008 0.2 .008 0.33 .013 3.0 .118 Max. 12.0 10.16±0.5 Max. .472 .400±.020 6.4 ±0.05 .252±.002 2.54 .100 0.47 .019 0.47 .019 1.0 .039 Terminal thickness = 0.20 .008 General tolerance: ±0.1 ±.004 2.54 .100 PC board pattern (BOTTOM VIEW) 4-0.8 dia. 4-.031 dia. Recommended mounting pad (TOP VIEW) 2.54 .100 10.8 .425 6.4 .252 1.9 .075 10.16 .400 1.5 .059 2.54 .100 2.54 .100 Tolerance: ±0.1 ±.004 Tolerance: ±0.1 ±.004 4. DIP6 Type APT1212(A), APT1222(A), APT1232(A) External dimensions CAD Data Surface mount terminal type Through hole terminal type Max. 10° Max. 10° 6.4±0.05 .252±.002 7.62±0.05 .300±.002 6.4±0.05 .252±.002 7.6 .299 Max. 10° 8.8±0.05 .346±.002 1 .039 8.8±0.05 .346±.002 3.4 .134 3.9±0.2 .154±.008 3.4 .134 3.4 .134 0.2 +0.2 −0 .008 +.008 −0 0.47 .019 3.0 .118 0.47 .019 1.25 .049 2.54 .100 1.25 .049 0.47 .019 0.47 .019 1.25 .049 6.4 .252 1.25 .049 1.25 .049 2.54 2.54 .100 .100 1.25 .049 2.54 .100 Terminal thickness = 0.25 .010 General tolerance: ±0.1 ±.004 PC board pattern (BOTTOM VIEW) 5-0.8 dia. 5-.031 dia. 0.47 .019 0.47 .019 5.08 .200 2.54 .100 Recommended mounting pad (TOP VIEW) 8.3 .327 7.62 2.54 .300 .100 1.9 .075 1.5 .059 2.54 2.54 .100 .100 Tolerance: ±0.1 ±.004 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ Tolerance: ±0.1 ±.004 ASCTB217E 201201-T1 APT1 5. DIP6 Wide Terminal Type APT1212W(A), APT1222W(A), APT1232W(A) External dimensions CAD Data Through hole terminal type Surface mount terminal type Max. 10° MAX. 10° 6.4±0.05 .252±.002 10.16±0.5 .400±.020 6.4±0.05 .252±.002 Max. 12.0 10.16±0.5 Max. .472 .400±.020 MAX. 10° 0.75 .030 3.4 .134 8.8±0.05 .346±.002 3.4 .134 8.8±0.05 .346±.002 3.0 .118 3.4 .134 0.47 .019 1.25 .049 0.47 0.47 .019 .019 1.25 1.25 .049 .049 2.54 2.54 .100 .100 0.2±0.2 .008±.008 0.47 .019 1.25 .049 0.47 .019 0.47 .019 1.25 .049 1.25 .049 2.54 2.54 .100 .100 Terminal thickness = 0.25 .010 General tolerance: ±0.1 ±.004 PC board pattern (BOTTOM VIEW) 5-0.8 dia. 5-.031 dia. Recommended mounting pad (TOP VIEW) 5.08 .200 2.54 .100 10.8 .425 6.4 .252 10.16 .400 2.54 .100 1.9 .075 1.5 .059 2.54 2.54 .100 .100 Tolerance: ±0.1 ±.004 Tolerance: ±0.1 ±.004 SCHEMATIC AND WIRING DIAGRAMS Notes: E1: Power source at input side; IF: LED forward current; VL: Load voltage; IL: Load current Output configuration Schematic 1 2 Load Wiring diagram 4 ZC Zero-cross circuit 3 1 4 2 3 4 Load E1 IF 1 4 2 3 VL (AC) 3 Load 1 Form A 1 VL (AC) AC 6 2 3 ZC Zero-cross circuit 1 4 E1 IF 6 6 VL (AC) 3 1 Load 2 4 6 VL (AC) 4 Load 2 3 ASCTB217E 201201-T1 4 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/