Microsemi APT15DS60BG 2-300v high frequency soft recovery rectifier diodes in sery Datasheet

1
2
TO
-24
7
D3PAK
1 - Cathode 2
2 - Anode 1
1
2
1
2
APT15DS60BG 600V
APT15DS60SG 600V
*G
13A
13A
Denotes RoHS Compliant, Pb Free Terminal Finish.
2-300V HIGH FREQUENCY SOFT RECOVERY RECTIFIER DIODES IN SERIES
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Anti-Parallel Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• Popular TO-247 Package or
• Cooler Operation
• Low Forward Voltage
• Higher Reliability Systems
• High Blocking Voltage
• Increased System Power
•
•
•
•
•
-Switchmode Power Supply
-Inverters
Free Wheeling Diode
-Motor Controllers
-Converters
Snubber Diode
Uninterruptible Power Supply (UPS)
Induction Heating
High Speed Rectifiers
Surface Mount D3PAK Package
• Low Leakage Current
Density
All Ratings: TC = 25°C unless otherwise specified.
MAXIMUM RATINGS
Symbol
Characteristic / Test Conditions
VR
Maximum D.C. Reverse Voltage
APT15DS60B_SG
UNIT
600
Volts
VRRM
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 77°C, Duty Cycle = 0.5)
13
RMS Forward Current (Square wave, 50% duty)
17
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
110
IF(RMS)
IFSM
TJ,TSTG
TL
Amps
-55 to 150
Operating and StorageTemperature Range
°C
300
Lead Temperature for 10 Sec.
STATIC ELECTRICAL CHARACTERISTICS
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
TYP
MAX
IF = 15A
3.2
4.0
IF = 30A
4.2
IF = 15A, TJ = 125°C
2.4
Volts
VR = 600V
150
VR = 600V, TJ = 125°C
500
APT Website - http://www.advancedpower.com
24
UNIT
µA
2-2007
VF
MIN
pF
053-3006 Rev C
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT15DS60B_SG
Characteristic
Test Conditions
MIN
TYP
MAX
UNIT
trr
Reverse Recovery Time I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C
F
F
R
J
-
13
trr
Reverse Recovery Time
-
14
Qrr
Reverse Recovery Charge
-
12
-
1.5
-
31
ns
-
85
nC
-
4.7
-
20
ns
-
160
nC
-
18
Amps
MIN
TYP
IRRM
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IF = 15A, diF/dt = -200A/µs
VR = 400V, TC = 125°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
VR = 400V, TC = 25°C
Maximum Reverse Recovery Current
trr
IRRM
IF = 15A, diF/dt = -200A/µs
IF = 15A, diF/dt = -1000A/µs
VR = 400V, TC = 125°C
Maximum Reverse Recovery Current
ns
nC
-
-
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
Characteristic / Test Conditions
MAX
RθJC
Junction-to-Case Thermal Resistance
1.5
RθJA
Junction-to-Ambient Thermal Resistance
40
WT
Torque
Package Weight
oz
5.9
g
10
lb•in
1.1
N•m
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.9
1.20
0.7
0.80
0.5
Note:
PDM
0.60
0.3
0.40
t2
0.1
0.20
0
SINGLE PULSE
Peak TJ = PDM x ZθJC + TC
0.05
10-5
10-4
10-3
10-2
10-1
1.0
10
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
2-2007
TJ ( C)
053-3006 Rev C
t1
Duty Factor D = t1/t2
TC ( C)
0.355
0.854
0.291
Dissipated Power
(Watts)
0.00229
0.0311
0.444
ZEXT
Z JC, THERMAL IMPEDANCE (°C/W)
θ
1.60
1.00
ZEXT are the external thermal
impedances: Case to sink,
sink to ambient, etc. Set to
zero when modeling only
the case to junction.
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
°C/W
0.22
Maximum Mounting Torque
1.40
UNIT
TYPICAL PERFORMANCE CURVES
APT15DS60B_SG
40
60
IF, FORWARD CURRENT
(A)
50
40
TJ = 150°C
30
TJ = 25°C
TJ = 125°C
20
10
trr, REVERSE RECOVERY TIME
(ns)
30A
Qrr, REVERSE RECOVERY CHARGE
(nC)
200
30A
15A
100
7.5A
50
0
15
10
TJ = 125°C
VR = 400V
0
200
400
600
800
1000 1200
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
TJ = 125°C
VR = 400V
30A
16
12
15A
8
7.5A
4
0
200
400
600
800
1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
0
0
200
400
600
800
1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
1.4
20
1.2
trr
Qrr
16
1.0
trr
IF(AV) (A)
Kf, DYNAMIC PARAMETERS
(Normalized to 800A/µs)
20
20
TJ = 125°C
VR = 400V
150
7.5A
25
0
1
2
3
4
5
6
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
IRRM, REVERSE RECOVERY CURRENT
(A)
0
15A
30
5
TJ = -55°C
0
35
0.8
0.6
Qrr
IRRM
0.4
8
4
0.2
0.0
12
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
Duty cycle = 0.5
TJ = 150°C
25
50
75
100
125
150
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
100
80
2-2007
60
40
20
0
.4
1
10
100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
053-3006 Rev C
CJ, JUNCTION CAPACITANCE
(pF)
120
APT15DS60B_SG
Vr
diF /dt Adjust
+18V
APT6017BLL
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
5
1
4
Zero
5
0.25 IRRM
3
2
Qrr - Area Under the Curve Defined by IRRM and trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
e13 SAC:
100%Tin,
Sn Silver, Copper
e1 SAC: Tin, Silver, Copper
3
TO-247 Package Outline
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
D PAK Package Outline
4.90 (.193)
5.10 (.201)
1.45 (.057)
1.60 (.063)
15.49 (.610)
16.26 (.640)
6.15 (.242) BSC
15.85 (.624)
16.05(.632)
0.40 (.016)
0.65 (.026)
053-3006 Rev C
2-2007
4.50 (.177) Max.
1.65 (.065)
2.13 (.084)
12.40 (.488)
12.70 (.500)
18.70 (.736)
19.10 (.752)
3.50 (.138)
3.81 (.150)
19.81 (.780)
20.32 (.800)
13.30 (.524)
13.60(.535)
5.38 (.212)
6.20 (.244)
20.80 (.819)
21.46 (.845)
0.40 (.016)
0.79 (.031)
1.00 (.039)
1.15(.045)
0.020 (.001)
0.250 (.010)
2.70 (.106)
2.90 (.114)
1.15 (.045)
1.45 (.057)
1.20 (.047)
1.90 (.075) 1.40 (.055)
2.10 (.083)
5.45 (.215) BSC
(2 Plcs.)
1.01 (.040)
1.40 (.055)
2.40 (.094)
2.70 (.106)
(Base of Lead)
Heat Sink (Isolated)
and Leads
are Plated
Anode
2.21 (.087)
2.59 (.102)
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
Anode
(Isolated)
Cathode
Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
Similar pages