Kingbright APT1608CGCK 1.6x0.8mm smd chip led lamp Datasheet

1.6X0.8mm SMD CHIP LED LAMP
Part Number: APT1608CGCK
Green
Features
Description
z 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS.
The Green source color devices are made with InGaAlP on
z LOW POWER CONSUMPTION.
GaAs substrate Light Emitting Diode.
z WIDE VIEWING ANGLE.
z IDEAL FOR BACKLIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
z PACKAGE: 2000PCS / REEL .
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAA6059
REV NO: V.10
DATE: JUN/01/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1203005329
Selection Guide
Part No.
Dice
APT1608CGCK
Iv (mcd) [2]
@ 20mA
Lens Type
Green (InGaAlP)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
10
40
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
574
nm
IF=20mA
Green
570
nm
IF=20mA
Spectral Line Half-width
Green
20
nm
IF=20mA
C
Capacitance
Green
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAA6059
REV NO: V.10
DATE: JUN/01/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1203005329
Green
APT1608CGCK
SPEC NO: DSAA6059
REV NO: V.10
DATE: JUN/01/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1203005329
APT1608CGCK
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAA6059
REV NO: V.10
DATE: JUN/01/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1203005329
PACKING & LABEL SPECIFICATIONS
APT1608CGCK
SPEC NO: DSAA6059
REV NO: V.10
DATE: JUN/01/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1203005329
Similar pages