Kingbright APT3216VGC-A 3.2mmx1.6mm smd chip led lamp Datasheet

3.2mmx1.6mm SMD CHIP LED LAMP
Part Number: APT3216VGC/A
PRELIMINARY SPEC
Green
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z 3.2mmx1.6mm SMT LED, 0.75mm THICKNESS.
The Green source color devices are made with InGaN on
z LOW POWER CONSUMPTION.
G-SiC Light Emitting Diode.
z WIDE VIEWING ANGLE.
Static electricity and surge damage the LEDS.
z IDEAL FOR BACKLIGHT AND INDICATOR.
It is recommended to use a wrist band or anti-electrostatic
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
glove when handling the LEDs.
z PACKAGE : 2000PCS / REEL.
All devices, equipment and machinery must be electrically
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
grounded.
z RoHS COMPLIANT.
Package Dimensions
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG5718
REV NO: V.2
DATE: MAY/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1203004734
Selection Guide
Part No.
Dice
APT3216VGC/A
Iv (mcd) [2]
@ 20mA
Lens Type
Green (InGaN)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
50
180
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
520
nm
IF=20mA
Green
525
nm
IF=20mA
Spectral Line Half-width
Green
35
nm
IF=20mA
C
Capacitance
Green
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.2
4
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
120
mW
DC Forward Current
30
mA
Peak Forward Current [1]
100
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG5718
REV NO: V.2
DATE: MAY/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1203004734
Green
APT3216VGC/A
SPEC NO: DSAG5718
REV NO: V.2
DATE: MAY/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1203004734
APT3216VGC/A
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG5718
REV NO: V.2
DATE: MAY/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1203004734
PACKING & LABEL SPECIFICATIONS
APT3216VGC/A
SPEC NO: DSAG5718
REV NO: V.2
DATE: MAY/07/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1203004734
Similar pages