APT56F60B2 APT56F60L 600V, 60A, 0.11Ω Max, trr ≤290ns N-Channel FREDFET Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. This 'FREDFET' version has a drain-source (body) diode that has been optimized for high reliability in ZVS phase shifted bridge and other circuits through reduced trr, soft recovery, and high recovery dv/dt capability. Low gate charge, high gain, and a greatly reduced ratio of Crss/Ciss result in excellent noise immunity and low switching loss. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control di/dt during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. T-Max® TO-264 APT56F60B2 APT56F60L D Single die FREDFET G S TYPICAL APPLICATIONS FEATURES • Fast switching with low EMI • ZVS phase shifted and other full bridge • Low trr for high reliability • Half bridge • Ultra low Crss for improved noise immunity • PFC and other boost converter • Low gate charge • Buck converter • Avalanche energy rated • Single and two switch forward • RoHS compliant • Flyback Absolute Maximum Ratings Symbol ID Parameter Unit Ratings Continuous Drain Current @ TC = 25°C 60 Continuous Drain Current @ TC = 100°C 38 A IDM Pulsed Drain Current VGS Gate-Source Voltage ±30 V EAS Single Pulse Avalanche Energy 2 1580 mJ IAR Avalanche Current, Repetitive or Non-Repetitive 28 A 1 210 Thermal and Mechanical Characteristics Min Characteristic Typ Max Unit W PD Total Power Dissipation @ TC = 25°C 1040 RθJC Junction to Case Thermal Resistance 0.12 RθCS Case to Sink Thermal Resistance, Flat, Greased Surface Operating and Storage Junction Temperature Range 150 °C Soldering Temperature for 10 Seconds (1.6mm from case) WT Package Weight 300 0.22 oz 6.2 g 10 in·lbf 1.1 N·m Mounting Torque ( TO-264 Package), 4-40 or M3 screw MicrosemiWebsite-http://www.microsemi.com 04-2009 TL Torque -55 Rev C TJ,TSTG °C/W 0.11 050-8154 Symbol Static Characteristics TJ = 25°C unless otherwise specified Symbol Parameter VBR(DSS) Drain-Source Breakdown Voltage ΔVBR(DSS)/ΔTJ Breakdown Voltage Temperature Coefficient RDS(on) Drain-Source On Resistance VGS(th) Gate-Source Threshold Voltage ΔVGS(th)/ΔTJ IGSS Gate-Source Leakage Current Dynamic Characteristics Symbol Forward Transconductance Ciss Input Capacitance Crss Reverse Transfer Capacitance Coss Output Capacitance 2.5 VDS = 600V TJ = 25°C VGS = 0V TJ = 125°C Typ Max 0.57 0.09 4 -10 0.11 5 250 1000 ±100 VGS = ±30V Unit V V/°C Ω V mV/°C µA nA TJ = 25°C unless otherwise specified Parameter gfs 600 VGS = VDS, ID = 2.5mA Threshold Voltage Temperature Coefficient Zero Gate Voltage Drain Current Min VGS = 10V, ID = 28A 3 IDSS Test Conditions VGS = 0V, ID = 250µA Reference to 25°C, ID = 250µA APT56F60B2_L Min Test Conditions VDS = 50V, ID = 28A 4 Effective Output Capacitance, Charge Related Co(er) 5 Effective Output Capacitance, Energy Related Max 55 11300 115 1040 VGS = 0V, VDS = 25V f = 1MHz Co(cr) Typ Unit S pF 550 VGS = 0V, VDS = 0V to 400V Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge td(on) Turn-On Delay Time tr td(off) tf Current Rise Time Turn-Off Delay Time 285 280 60 120 65 75 190 60 VGS = 0 to 10V, ID = 28A, VDS = 300V Resistive Switching VDD = 400V, ID = 28A RG = 2.2Ω 6 , VGG = 15V Current Fall Time nC ns Source-Drain Diode Characteristics Symbol IS ISM VSD Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Irrm Reverse Recovery Current dv/dt Peak Recovery dv/dt Test Conditions Min Typ D MOSFET symbol showing the integral reverse p-n junction diode (body diode) Max 60 A G 210 S ISD = 28A, TJ = 25°C, VGS = 0V TJ = 25°C TJ = 125°C ISD = 28A 3 TJ = 25°C diSD/dt = 100A/µs TJ = 125°C VDD = 100V TJ = 25°C Unit TJ = 125°C ISD ≤ 28A, di/dt ≤1000A/µs, VDD = 400V, TJ = 125°C 255 450 1.41 3.66 10.7 15.8 1.0 290 540 V ns µC A 20 V/ns 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 050-8154 Rev C 04-2009 2 Starting at TJ = 25°C, L = 4.03mH, RG = 25Ω, IAS = 28A. 3 Pulse test: Pulse Width < 380µs, duty cycle < 2%. 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -1.10E-7/VDS^2 + 4.60E-8/VDS + 1.72E-10. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. APT56F60B2_L 90 250 V GS = 10V T = 125°C J 80 V TJ = -55°C ID, DRIAN CURRENT (A) 150 TJ = 25°C 100 50 TJ = 150°C 60 6V 50 40 30 5.5V 20 10 TJ = 125°C 0 0 0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) 5V 4.5V 0 NORMALIZED TO VDS> ID(ON) x RDS(ON) MAX. 180 2.5 250µSEC. PULSE TEST @ <0.5 % DUTY CYCLE ID, DRAIN CURRENT (A) 160 2.0 1.5 1.0 0.5 140 120 TJ = -55°C 100 TJ = 25°C 80 TJ = 125°C 60 40 20 0 0 -55 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 3, RDS(ON) vs Junction Temperature 0 1 2 3 4 5 6 7 8 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics 20,000 TJ = -55°C Ciss 10,000 TJ = 25°C 80 TJ = 125°C 60 40 1000 Coss 100 Crss 20 0 10 20 30 40 50 60 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current 10 70 100 200 300 400 500 600 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage 16 200 14 12 VDS = 120V 10 VDS = 300V 8 VDS = 480V 4 2 0 0 50 100 150 200 250 300 350 400 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage ISD, REVERSE DRAIN CURRENT (A) ID = 28A 6 0 180 160 140 120 TJ = 25°C 100 80 TJ = 150°C 60 40 20 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage 04-2009 0 Rev C gfs, TRANSCONDUCTANCE Figure 2, Output Characteristics VGS = 10V @ 28A 100 VGS, GATE-TO-SOURCE VOLTAGE (V) 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 200 C, CAPACITANCE (pF) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE Figure 1, Output Characteristics 3.0 = 7&8V GS 70 050-8154 ID, DRAIN CURRENT (A) 200 APT56F60B2_L 250 250 100 IDM ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 100 13µs 10 100µs 1ms 10ms Rds(on) 100ms DC line 1 0.1 13µs 10 100µs 1ms Rds(on) 10ms TJ = 150°C TC = 25°C 1 100ms DC line Scaling for Different Case & Junction Temperatures: ID = ID(T = 25°C)*(TJ - TC)/125 TJ = 125°C TC = 75°C 1 IDM 0.1 10 100 800 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area C 1 10 100 800 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 0.12 D = 0.9 0.10 0.7 0.08 Note: 0.5 0.06 PDM ZθJC, THERMAL IMPEDANCE (°C/W) 0.14 t1 0.3 0.04 t2 t1 = Pulse Duration t Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC SINGLE PULSE 0.02 0.1 0.05 0 10-5 10-4 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration T-MAX® (B2) Package Outline TO-264 (L) Package Outline e3 100% Sn Plated 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 15.49 (.610) 16.26 (.640) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.38 (.212) 6.20 (.244) 5.79 (.228) 6.20 (.244) Drain Drain 20.80 (.819) 21.46 (.845) 4.50 (.177) Max. 050-8154 Rev C 04-2009 0.40 (.016) 0.79 (.031) 25.48 (1.003) 26.49 (1.043) 2.87 (.113) 3.12 (.123) 2.29 (.090) 2.69 (.106) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 19.81 (.780) 21.39 (.842) Gate Drain Source 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches) 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 2.29 (.090) 2.69 (.106) Gate Drain Source 1.0