APTGT75DSK60T3G Dual Buck chopper Trench + Field Stop IGBT® Power Module Application • AC and DC motor control • Switched Mode Power Supplies 13 14 Q2 18 11 Features • Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design • High level of integration • Internal thermistor for temperature monitoring 10 19 22 7 23 8 CR1 CR2 29 30 31 15 32 16 R1 28 27 26 25 20 19 18 23 22 29 16 30 15 31 14 32 13 2 3 4 7 8 10 11 12 All multiple inputs and outputs must be shorted together Example: 13/14 ; 29/30 ; 22/23 … Benefits • Stable temperature behavior • Very rugged • Solderable terminals for easy PCB mounting • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Easy paralleling due to positive TC of VCEsat • Low profile • Each leg can be easily paralleled to achieve a single buck of twice the current capability. • RoHS Compliant Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage TC = 25°C TC = 80°C TC = 25°C Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Reverse Bias Safe Operating Area TC = 25°C TJ = 150°C Max ratings 600 100 75 140 ±20 250 150A @ 550V Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. See application note APT0502 on www.microsemi.com www.microsemi.com 1-5 APTGT75DSK60T3G– Rev 1 June ,2006 Q1 VCES = 600V IC = 75A @ Tc = 80°C APTGT75DSK60T3G All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics ICES Zero Gate Voltage Collector Current VCE(sat) Collector Emitter Saturation Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Dynamic Characteristics Symbol Characteristic Cies Coes Cres Td(on) Tr Td(off) Tf Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Td(on) Turn-on Delay Time Tr Rise Time Turn-off Delay Time Fall Time Td(off) Tf Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Test Conditions VGE = 0V, VCE = 600V Tj = 25°C VGE =15V IC = 75A Tj = 150°C VGE = VCE, IC = 600µA VGE = 20V, VCE = 0V Test Conditions VRRM IRM IF DC Forward current VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Er Reverse Recovery Energy Min Typ Max Unit 250 1.9 µA 6.5 600 V nA Max Unit 4620 300 140 110 45 200 40 pF ns 50 250 60 0.35 0.6 2.2 2.6 Typ ns mJ mJ Max 600 VR=600V IF = 75A VGE = 0V IF = 75A VR = 300V di/dt =2000A/µs www.microsemi.com Unit V Tj = 25°C Tj = 150°C Tc = 80°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C V 120 Min Maximum Peak Repetitive Reverse Voltage Maximum Reverse Leakage Current 5.0 Inductive Switching (25°C) VGE = ±15V VBus = 300V IC = 75A R G = 4.7Ω Inductive Switching (150°C) VGE = ±15V VBus = 300V IC = 75A R G = 4.7Ω VGE = ±15V Tj = 25°C VBus = 300V Tj = 150°C IC = 75A Tj = 25°C R G = 4.7Ω Tj = 150°C Test Conditions Typ 1.5 1.7 5.8 VGE = 0V VCE = 25V f = 1MHz Chopper diode ratings and characteristics Symbol Characteristic Min 250 500 75 1.6 1.5 100 150 3.6 7.6 0.85 1.8 µA A 2 V ns µC mJ 2-5 APTGT75DSK60T3G– Rev 1 June ,2006 Symbol Characteristic APTGT75DSK60T3G Temperature sensor NTC (see application note APT0406 on www.microsemi.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K RT = R 25 Max Unit kΩ K Min Typ Max 0.60 0.98 Unit T: Thermistor temperature Symbol Characteristic VISOL TJ TSTG TC Torque Wt Typ 50 3952 1 1 RT : Thermistor value at T exp B 25 / 85 − T25 T Thermal and package characteristics RthJC Min IGBT Diode Junction to Case Thermal Resistance RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight To heatsink M4 2500 -40 -40 -40 2.5 °C/W V 175 125 100 4.7 110 °C N.m g 28 17 1 12 See application note 1901 - Mounting Instructions for SP3 Power Modules on www.microsemi.com www.microsemi.com 3-5 APTGT75DSK60T3G– Rev 1 June ,2006 SP3 Package outline (dimensions in mm) APTGT75DSK60T3G Typical Performance Curve Output Characteristics (VGE=15V) 150 Output Characteristics 150 T J=25°C VGE=19V TJ = 150°C 125 125 75 VGE=15V 75 50 50 25 25 VGE =9V T J=25°C 0 0 0.5 1 1.5 VCE (V) 0 2 2.5 0 3 5 T J=25°C 125 E (mJ) 75 TJ=150°C T J=25°C 3 Er 2 8 9 10 11 0 12 25 50 100 125 150 Reverse Bias Safe Operating Area 175 VCE = 300V VGE =15V IC = 75A T J = 150°C Eoff 150 125 Eon 3 IC (A) E (mJ) 75 IC (A) Switching Energy Losses vs Gate Resistance 4 3.5 Eoff VGE (V) 5 3 0 0 7 2.5 1 25 6 1.5 2 VCE (V) Eon TJ=125°C 5 1 VCE = 300V VGE = 15V RG = 4.7Ω TJ = 150°C 4 100 50 0.5 Energy losses vs Collector Current Transfert Characteristics 150 IC (A) VGE=13V 100 T J=150°C IC (A) IC (A) TJ =125°C 100 2 75 50 Er 1 100 VGE =15V TJ =150°C RG=4.7Ω 25 Eon 0 0 0 5 10 15 20 25 30 Gate Resistance (ohms) 35 40 0 100 200 300 400 VCE (V) 500 600 700 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration 0.6 0.5 0.4 IGBT 0.9 0.7 0.5 0.3 0.2 0.1 0.3 0.1 0.05 0 0.00001 Single Pulse 0.0001 0.001 0.01 0.1 Rectangular Pulse Duration in Seconds www.microsemi.com 1 10 4-5 APTGT75DSK60T3G– Rev 1 June ,2006 Thermal Impedance (°C/W) 0.7 APTGT75DSK60T3G Forward Characteristic of diode 150 VCE=300V D=50% RG=4.7Ω TJ =150°C Tc=85°C 100 ZVS 80 60 125 100 IF (A) Fmax, Operating Frequency (kHz) Operating Frequency vs Collector Current 120 ZCS 40 75 T J=125°C 50 Hard switching 20 TJ =150°C 25 TJ=25°C 0 0 0 20 40 60 80 0 100 0.4 IC (A) 0.8 1.2 1.6 VF (V) 2 2.4 maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 1.2 Diode 1 0.8 0.9 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Single Pulse 0.05 0.00001 0.0001 0.001 0.01 0.1 1 10 Microsemi reserves the right to change, without notice, the specifications and information contained herein Microsemi's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. www.microsemi.com 5-5 APTGT75DSK60T3G– Rev 1 June ,2006 Rectangular Pulse Duration in Seconds