CHEMI-CON APXE6R3ARA121ME61G Aluminum solid capacitor Datasheet

Engineering Bulletin
Tentative
Conductive Polymer
Aluminum Solid Capacitors
No.750A / Sep.2004
@Super low ESR, impedance and high heat resistance have been obtained by using
conductive polymer as electrolyte.
(ESR and rated ripple current values are improved from PXC series.)
@Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 1,200MF
@Case size range : F5B5.8L to F10B7.7L
@Suitable for DC-DC converters, voltage regulators and decoupling applications used to
computer motherboards etc.
Feature!
Pb Free Type
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
-55 to +105C
2.5 to 16Vdc
P20% (M)
Rated voltageB1.15V
I=0.2CV (max.)
I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc)
Dissipation Factor
(tane)
0.12 max.
Low Temperature
Characteristics
(Max. Impedance Ratio)
Z(-25C)/Z(+20C)[1.15
Z(-55C)/Z(+20C)[1.25
(at 20C, 120Hz)
(at 105C)
(at 20C after 2 minutes)
(at 20C, 120Hz)
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours
at 105C.
Appearance
No significant damage
Capacitance change
[P20% of the initial value
DF (tanE)
[150% of the initial specified value
ESR
[150% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at
60C, 90 to 95% RH for 500 hours.
Appearance
No significant damage
Capacitance change
[P20% of the initial value
DF (tanE)
[150% of the initial specified value
ESR
[150% of the initial specified value
Leakage current
[The initial specified value
The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance
No significant damage
Capacitance change
[P20% of the initial value
DF (tanE)
[150% of the initial specified value
ESR
[150% of the initial specified value
Leakage current
[The initial specified value
1% per 1000 hours maximum (Confidence level 60% at 105C)
Endurance
Bias Humidity
Surge Voltage
Failure Rate
*Note : If any doubt arises, measure the leakage current after following voltage treatment.
Voltage treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105C.
?DIMENSIONS [mm]
?MARKING
@Terminal Code : A
EX) 2.5V390MF
0.3max.
LP0.3
AP0.2
?PART NUMBERING SYSTEM
1
2
3
4
5
6
Size Code
E61
F61
F80
H70
H80
J80
P
CP0.2
BP0.2
FDP0.5
W
7
8
9
10
11
12
13
14
15
16
17
fD
5
6.3
6.3
8
8
10
L
5.8
5.8
7.7
6.7
7.7
7.7
A
B
C
5.3 5.3 5.9
6.6 6.6 7.2
6.6 6.6 7.2
8.3 8.3 9.0
8.3 8.3 9.0
10.3 10.3 11.0
W
0.5 to 0.8
0.5 to 0.8
0.5 to 0.8
0.7 to 1.1
0.7 to 1.1
0.7 to 1.1
P
1.4
1.9
1.9
3.1
3.1
4.5
E49A
390
2.5V
18
A PXE AAA A RA AAA M AAA G
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 47MF:470,100MF:101)
Taping code
Terminal code
Voltage code (ex. 6.3V:6R3,10V:100)
Series code
Category
Specifications in this bulletin are subject to change without notice.
Please ask us for technical specifications before purchase and use.
NIPPON CHEMI-CON CORPORATION
1213
1
Engineering Bulletin
Tentative
Conductive Polymer
Aluminum Solid Capacitors
No.750A / Sep.2004
?STANDARD RATINGS
WV Cap
(Vdc) (mF)
2.5
4
6.3
180
390
470
560
560
680
820
1000
1200
100
150
270
330
390
470
560
680
1000
100
120
220
270
330
Rated ripple
current
ESR
Size
(momax/20c, (mArms/100k to
code
300kHz)
100kHz)
-55 to +105c
E61
F61
F80
F80
H70
H70
H80
H80
J80
E61
E61
F61
F61
F80
H70
H70
H80
J80
E61
E61
F61
F80
F80
21
15
13
13
13
13
12
12
13
22
22
15
15
14
14
14
13
14
24
24
15
14
14
2670
3160
3600
3600
4100
4100
4260
4260
4450
2610
2610
3160
3160
3470
3950
3950
3950
4300
2500
2500
3160
3470
3470
WV Cap
(Vdc) (mF)
Part No.
APXE2R5ARA181ME61G
APXE2R5ARA391MF61G
APXE2R5ARA471MF80G
APXE2R5ARA561MF80G
APXE2R5ARA561MH70G
APXE2R5ARA681MH70G
APXE2R5ARA821MH80G
APXE2R5ARA102MH80G
APXE2R5ARA122MJ80G
APXE4R0ARA101ME61G
APXE4R0ARA151ME61G
APXE4R0ARA271MF61G
APXE4R0ARA331MF61G
APXE4R0ARA391MF80G
APXE4R0ARA471MH70G
APXE4R0ARA561MH70G
APXE4R0ARA681MH80G
APXE4R0ARA102MJ80G
APXE6R3ARA101ME61G
APXE6R3ARA121ME61G
APXE6R3ARA221MF61G
APXE6R3ARA271MF80G
APXE6R3ARA331MF80G
6.3
10
16
330
390
470
820
47
56
68
120
150
220
270
330
470
33
39
68
82
100
100
120
150
220
Rated ripple
current
ESR
Size
(momax/20c, (mArms/100k to
code
300kHz)
100kHz)
-55 to +105c
H70
H70
H80
J80
E61
E61
E61
F61
F80
H70
H70
H80
J80
E61
E61
F61
F80
F80
H70
H70
H80
J80
14
14
13
14
28
28
28
25
21
21
21
19
19
35
35
28
24
24
24
24
22
22
3950
3950
3950
4300
2310
2310
2310
2530
2880
3220
3220
3390
3800
2070
2070
2390
2700
2700
3010
3010
3150
3450
Part No.
APXE6R3ARA331MH70G
APXE6R3ARA391MH70G
APXE6R3ARA471MH80G
APXE6R3ARA821MJ80G
APXE100ARA470ME61G
APXE100ARA560ME61G
APXE100ARA680ME61G
APXE100ARA121MF61G
APXE100ARA151MF80G
APXE100ARA221MH70G
APXE100ARA271MH70G
APXE100ARA331MH80G
APXE100ARA471MJ80G
APXE160ARA330ME61G
APXE160ARA390ME61G
APXE160ARA680MF61G
APXE160ARA820MF80G
APXE160ARA101MF80G
APXE160ARA101MH70G
APXE160ARA121MH70G
APXE160ARA151MH80G
APXE160ARA221MJ80G
?Recommended Reflow Soldering Conditions
@Reflow Profile
Method : Air or Infrated Reflow
@Conditions
[The times of reflow soldering : once]
Peak temperature : 250C max.
Max. period of time over 230C(T1) : 40 sec.max.
Max. period of time over 200C(T2) : 60 sec.max.
Preheat : 150Cmax., 120 sec. max.
Temperature on the top of capacitor
and
Temperature of capacitor terminal
(C)
Peak
temperature
Peak
230
T1
200
[The times of reflow soldering : twice]
Peak temperature : 250C max.
Max. period of time over 230C(T1) : 30 sec.max.
Max. period of time over 200C(T2) : 50 sec.max.
Preheat : 150Cmax., 120 sec. max.
T2
150
Preheat
120sec. max.
25
Time (sec.)
?Recommended Solder Land on PC Board
c
a
b
Size code
E61
F61, F80
H70, H80
J80
a
1.4
1.9
3.1
4.5
b
3.0
3.5
4.2
4.4
c
1.6
1.6
2.2
2.2
Solder land on PC board
Specifications in this bulletin are subject to change without notice.
NIPPON CHEMI-CON CORPORATION
1213
2
Similar pages