Arch AQFC480E-48S Ac-dc switching power supply Datasheet

VER : B_5
update : 2015.11.17
AC-DC Switching Power Supply
AQFC480E SERIES
(CC Mode)
480 Watts
KEY FEATURES
Standard
A Type
 Enclosed Switching Power Supply
 Universal Input: 90-264 VAC
 Active P.F.C. Function, PF>0.95
 Cooling by Built-in DC FAN
 Protections: Over Load / Over Voltage /
Over Temperature / Short Circuit
.All by Auto-recovery
 Built-in Remote ON/OFF Control
 Stand by 5V @ 0.6A
 High Efficiency up to 92%
 Ultra Compact Size: 7.0 x 4.2 x 2.37 Inches
 3-Year Product Warranty
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
AQFC480E-12S
480W
Max Output Wattage (W)
Voltage
Input
Output
Isolation
AQFC480E-48S
90-264 VAC or 120-370 VDC
47-63 Hz
Current (Full load)
< 5.5 A max. (115 VAC) / < 3.0 A max. (230 VAC)
Inrush Current (<2ms)
< 50 A max. (115 VAC) / < 70 A max. (230 VAC)
Leakage Current
< 0.5 mA max.(240VAC 63Hz)
Power Factor
PF>0.95 (115 VAC) / PF>0.90 (230 VAC) at Full Load
Voltage (V.DC.)
12V
24V
36V
48V
Constant Current Range (V.DC)
10 ~ 13.2V
20 ~ 26.4V
26 ~ 36V
30 ~ 50.4V
Current Adj. Range (A) max
5 ~ 40
4 ~ 20
3 ~ 13.33
3 ~ 10
Minimum Load
5%
Maximum Capacitive Load
180000 uF
75000 uF
50000 uF
25000 uF
Ripple & Noise (max.)
100mVp-p
200mVp-p
200mVp-p
300mVp-p
Vin:115(V.AC)
85%
87%
89%
88%
Vin:230(V.AC)
88%
90%
92%
91%
Hold-up Time
10 ms min.
Over Power Protection
Auto recovery
Over Voltage Protection
Auto recovery
Over Temperature
Auto recovery
Short Circuit Protection
Auto-recovery
Input-Output (V.AC)
3000VAC or 4242VDC
Input-FG
(V.AC)
1500V
Output-FG
.(V.AC)
5V Stand by
Function
AQFC480E-36S
Frequency (Hz)
Efficiency (%.)
Protection
AQFC480E-24S
500V
5VSB: [email protected] ; Tolerance 10% , Ripple & Noise: 100m Vp-p (max.)
Remote Control
+RC / -RC: Power ON=open ; Power OFF=short
FAN Control
12VDC / 0.5A max.
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-1-
VER : B_5
update : 2015.11.17
AC-DC Switching Power Supply
AQFC480E SERIES
(CC Mode)
480 Watts
ELECTRICAL SPECIFICATIONS
All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Model No.
Operating Temperature
Environment
Physical
Safety
EMC
AQFC480E-12S
AQFC480E-24S
-20°C…+70°C (with derating)
AQFC480E-36S
Storage Temperature
-25°C…+85°C
Temperature Coefficient
±0.03%/°C ( 0~50°C )
Humidity
95% RH
MTBF
>100,000 h @ 25°C (MIL-HDBK-217F)
Vibration
10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes.
(177.8 x 106.5 x 60.3 mm ) Tolerance 0.5 mm
Dimension (L x W x H)
7.0 x 4.2 x 2.37 Inches
Weight
950 g
Agency Approvals
UL60950-1, CE(Surge:4KV)
EMI (Conducted & Radiated Emission)
EN 55022 class B
EMS (Noise Immunity)
EN 55024
AQFC480E-48S
NOTE
1. Ripple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor.
2. Strongly recommend to conduct this test with DC Voltage. If customer wishes to test with AC Voltage,
please disconnect all Y-Capacitors within Arch power supply.
BLOCK DIAGRAM
DERATING
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-2-
VER : B_5
update : 2015.11.17
AC-DC Switching Power Supply
AQFC480E SERIES
(CC Mode)
480 Watts
MECHANICAL DIMENSION
Standard
AC Input Terminal Pin
ASSEMBLY INSTRUCTIONS
*U Case T=2.0mm
Customer is advised to screw into the threads no more than 2.0mm
PIN#
Single
1
AC IN (N)
2
AC IN (L)
3
DC Output Terminal Pin
PIN#
Single
4~6
+DC OUT
7~9
-DC OUT
Connector Pin (CN4)
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
PIN#
Single
C1
NC
C2
NC
C3
+RC
C4
-RC
C5
NC
C6
NC
C7
+5V SB
C8
-5V SB
-3-
VER : B_5
update : 2015.11.17
AC-DC Switching Power Supply
AQFC480E SERIES
(CC Mode)
480 Watts
MECHANICAL DIMENSION
A Type
AC Input Terminal Pin
ASSEMBLY INSTRUCTIONS
*U Case T=2.0mm
Customer is advised to screw into the threads no more than 2.0mm
PIN#
Single
1
AC IN (N)
2
AC IN (L)
3
DC Output Terminal Pin
PIN#
Single
4~9
+DC OUT
10~15
-DC OUT
Connector Pin (CN4)
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
PIN#
Single
C1
NC
C2
NC
C3
+RC
C4
-RC
C5
NC
C6
NC
C7
+5V SB
C8
-5V SB
-4-
VER : B_5
update : 2015.11.17
AC-DC Switching Power Supply
AQFC480E SERIES
(CC Mode)
480 Watts
FUNCTION DESCRIPITON of CN4 :
Pin No.
Function
C1
NC
Description
C2
NC
C3
+RC
Turns the output on and off by electrical or dry contact between pin C4 (-RC), Short: Power OFF, Open: Power ON.
C4
-RC
Remote control ground.
C5
NC
C6
NC
C7
+5V SB
Stand by voltage output ground 4.5~5.5V, referenced to pin C8(-5V SB). The maximum load current is 0.6A.
C8
-5V SB
Stand by voltage output ground.
FUNCTION MANUAL :
Remote Control
It can be turned ON/OFF by using the "Remote Control" function.
Between RC+(pinC3) and
RC-(pinC4)
Output
Status
SW ON (Short)
SW OFF (Open)
OFF
ON
http://www.archcorp.com.tw
TEL: +886-2-26989508 FAX: +886-2-26981319
-5-
Similar pages