NAIS AQY410SX Gu (general use) type sop series 1- channel (form b) 4-pin type Datasheet

TESTING
GU (General Use) Type
SOP Series
1- Channel (Form B)
4-Pin Type
(6-pin)
4.3±0.2
.169±.008
4.4±0.2
.173±.008
2.1±0.2
.083±.008
PhotoMOS
RELAYS
(4-pin)
Approx. 70%
Volume
Approx. 70%
mm inch
Footprint
1
2
2. Low on resistance for normallyclosed type
This has been realized thanks to the builtin MOSFET processed by our proprietary
method, DSD (Double-diffused and Selective Doping) method.
3
,
FEATURES
4
3. Tape and reel
The device comes standard in a tape and
reel (1,000 pcs./reel) to facilitate automatic
insertion machines.
4. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable control of low-level analog signals without distortion.
5. Low-level off state leakage current
In contrast to the SSR with an off state
leakage current of several milliamps, the
PhotoMOS relay features a very small off
state leakage current of 1nA even with the
rated load voltage of 350 V (AQY410S).
Passivation membrane
Intermediate
Source electrode Gate electrode
insulating
membrane
TYPICAL APPLICATIONS
• Telecommunications (PC, Electoronic
Notepad)
• Measuring and Testing equipment
• Factory Automation Equipment
• Security equipment
• High speed inspection machines
,
,
1. SO package 4-Pin type in super miniature design
The device comes in a super-miniature
SO package 4-Pin type measuring (W)
4.3×(L) 4.4×(H) 2.1 mm (W) .169×(L)
.173×(H) .083 inch —approx. 70% of the
volume and 70% of the footprint size of SO
package 6-pin type PhotoMOS Relays.
Cross section of the normally-closed type of
power MOS
N+
P+
N+
N+
P+
N+
Gate
oxidation
membrane
N–
Drain
electrode
N+
TYPES
AC/DC type
Output rating*
Part No.
Packing quantity in tape
and reel
Load voltage
Load current
Picked from the 1/2-pin side
Picked from the 3/4-pin side
350 V
120 mA
AQY410SX
AQY410SZ
1,000 pcs.
400 V
100 mA
AQY414SX
AQY414SZ
* Indicate the peak AC and DC values.
Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 100 pcs.;
Case: 2,000 pcs.)
(2) For space reasons, the top two letters of the product number "AQY" and "S" are omitted on the product seal. The package type indicator "X"
and "Z" are omitted from the seal. (Ex. the label for product number AQY414S is 414).
RATING
AC/DC type
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
LED forward current
LED reverse voltage
Input
Peak forward current
Power dissipation
Load voltage (peak AC)
Continuous load current
(peak AC)
Output
Peak load current
Power dissipation
Total power dissipation
I/O isolation voltage
Temperture Operating
limits
Storage
Symbol
IF
VR
IFP
Pin
VL
AQY410S
AQY414S
350 V
400 V
IL
0.12 A
0.1 A
Ipeak
Pout
PT
Viso
Topr
Tstg
0.3 A
50 mA
3V
1A
75 mW
Remarks
f = 100 Hz, Duty factor = 0.1%
0.24 A
300 mW
350 mW
1,500 V AC
–40°C to +85°C –40°F to +185°F
–40°C to +100°C –40°F to +212°F
100ms (1 shot), VL = DC
Non-condensing at low temperatures
63
AQY41❍S
2. Electrical characteristics (Ambient temperature: 25°C 77°F )
Item
LED operate
(OFF) current
LED reverse
(ON) current
Input
LED dropout
voltage
Symbol
Typical
Maximum
Minimum
Typical
Typical
Maximum
AQY410S
AQY414S
0.9 mA
3 mA
0.4 mA
0.85 mA
1.14 V (1.25 V at IF = 50 mA)
1.5 V
IFon
IFoff
VF
Typical
On resistance
Ron
Maximum
Output
Off state leakage current
Maximum
Typical
Maximum
Typical
Reverse (ON)
time*
Transfer
Maximum
characteristics
Typical
I/O capacitance
Maximum
Initial I/O isolaMinimum
tion resistance
Operate (OFF)
time*
18 Ω
26 Ω
25 Ω
35 Ω
Remarks
IL = Max.
IL = Max.
IF = 5 mA
IF = 0 mA
IL = Max.
Within 1 s on time
IF = 5 mA
VL = Max.
1 µA
ILeak
0.52 ms
Ton
0.47 ms
IF = 0 mA-->5 mA
IL = Max.
0.28 ms
IF = 5 mA-->0 mA
IL = Max.
1 ms
0.23 ms
Toff
1 ms
0.8 pF
1.5 pF
Ciso
f = 1 MHz
VB = 0
1,000 MΩ
Riso
500 V DC
Note: Recommendable LED forward current IF = 5mA.
For type of connection, see page 32.
*Operate/Reverse time
Input
Output
10%
90%
Toff
Ton
■ For Dimensions, see Page 28.
■ For Schematic and Wiring Diagrams, see Page 32.
■ For Cautions for Use, see Page 36.
REFERENCE DATA
1. Load current vs. ambient temperature characteristics
2. On resistance vs. ambient temperature characteristics
3. Operate (OFF) time vs. ambient temperature
characteristics
Allowable ambient temperature:
–40°C to +85°C
–40°F to +185°F
Measured portion: between terminals 3 and 4;
LED current: 0 mA;
Continuous load current: Max.(DC)
LED current: 5 mA; Load voltage: Max.(DC);
Continuous load current: Max.(DC)
30
100
25
AQY414S
80
60
20
AQY410S
15
1.5
1
AQY414S
0.5
AQY410S
5
20
64
AQY414S
10
40
0
–40 –20
On resistance, Ω
Load current, mA
120
2
AQY410S
Operate (OFF) time, ms
140
0
20
40
60 80 85 100
Ambient temperature, °C
0
–40 –20
0
20 40 60
80 85 100
Ambient temperature, °C
0
–40 –20
0
20 40 60 80 85 100
Ambient temperature, °C
AQY41❍S
4. Reverse (ON) time vs. ambient temperature
characteristics
5. LED operate (OFF) current vs. ambient temperature characteristics
6. LED reverse (ON) current vs. ambient temperature characteristics
LED current: 5 mA; Load voltage: Max.(DC);
Continuous load current: Max.(DC)
Load voltage: Max.(DC);
Continuous load current: Max.(DC)
Load voltage: Max.(DC);
Continuous load current: Max.(DC)
0.8
0.6
0.4
AQY414S
0.2
5
LED operate (OFF) current, mA
LED operate (OFF) current, mA
Reverse (ON) time, ms
1.0
4
3
2
1
5
4
3
2
1
AQY410S
0
–40 –20
0
0 20 40 60 80 85 100
Ambient temperature, °C
–40 –20
7. LED dropout voltage vs. ambient temperature characteristics
8. Voltage vs. current characteristics of output
at MOS portion
LED current: 5 to 50 mA
Measured portion: between terminals 3 and 4;
Ambient temperature: 25°C 77°F
1.4
1.3
1.2
1.0
0
–40 –20
AQY414S
0.5 1 1.5 2 2.5 3
–20
Voltage, V
–40
–60
–80
–100
–120
–140
50mA
30mA
20mA
10mA
5mA
1.1
AQY410S
0
20 40 60
80 85
Ambient temperature, °C
-40
-20
0
20 40 60 80 85
Ambient temperature, °C
9. Off state leakage current
Measured portion: between terminals 3 and 4;
LED current: 5 mA;
Ambient temperature: 25°C 77°F
Off state leakage current, A
140
120
100
80
60
40
20
–3 –2.5 –2 –1.5 –1 –0.5
Current, mA
LED dropout voltage, V
1.5
0
0
20
40 60 80 85
Ambient temperature, °C
10–3
10–6
10–9
10–12
0
20
40
60
80
Load voltage, V
100
11. LED forward current vs. reverse (ON) time
characteristics
12. Applied voltage vs. output capacitance
characteristics
Measured portion: between terminals 3 and 4;
Load voltage: Max.(DC); Continuous load current:
Max.(DC); Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4;
Load voltage: Max.(DC); Continuous load currentMax.(DC); Ambient temperature: 25°C 77°F
Measured portion: between terminals 3 and 4;
Frequency: 1 MHz;
Ambient temperature: 25°C 77°F
0.6
2.5
0.5
2.0
1.5
1.0
0.5
0
5/7/2001
120
Output capacitance, pF
3.0
Reverse (ON) time, ms
Operate (OFF) time, ms
10. LED forward current vs. operate (OFF) time
characteristics
0.4
0.3
0.2
0.1
0
10
20
30
40
50
LED forward current, mA
60
0
100
80
60
40
20
0
10
20
30
40
50
LED forward current, mA
60
0
0
10
20
30
40
50
Applied voltage, V
60
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
65
Go To Online Catalog
Similar pages