NKK AS11CH Subminiature slide Datasheet

Subminiature Slides
Series AS
Distinctive Characteristics
Subminiature size (1/3 size of Series M switches) saves space on PC boards.
Specifically developed for logic-level applications.
Award-winning STC contact mechanism with benefits
unavailable in conventional mechanisms: smoother,
positive detent actuation, increased contact
stability and unparalleled logic-level reliability.
(Additional STC details in Terms & Acronyms;
see Supplement section.)
Available in various actuator lengths.
Antistatic superstructure of carbon
blended polyacetal prevents static
discharge to the contacts.
Molded-in, epoxy sealed or ultrasonically
welded terminals lock out flux, solvents,
and other contaminants.
.100” x .100” (2.54mm x 2.54mm) terminal
spacing conforms to standard PC board grid
spacing.
Matching indicators available and shown at the
end of Section M.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Subminiature Slides
Series AS
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Travel:
Materials & Finishes
Actuator:
Upper Case Housing:
Lower Case Housing:
Support Bracket:
Movable Contact:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
PCB Processing
Soldering:
Cleaning:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
50,000 operations minimum
50,000 operations minimum
2.55N
Nonshorting (break-before-make)
Pretravel: .082” (2.1mm); Overtravel: .016” (0.4mm); Total Travel: .098” (2.5mm)
Glass fiber reinforced polyamide
Carbon blended polyacetal (antistatic)
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Brass with gold plating
Brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 192 hours @ 40°C (104°F)
10 ~ 60Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 5 minutes; 3 right angled directions for 30 minutes
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: for single pole see Profile B in Supplement section; for double pole see Profile A.
These devices are not process sealed. Hand clean locally using alcohol based solution.
Standards & Certifications
UL Recognition
or CSA Certification:
The A Series slides have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series AS
Subminiature Slides
TYPICAL SWITCH ORDERING EXAMPLE
AS
2
POLES
1
SPST
SPDT
2
DPDT
SP3T
2
CIRCUITS
A
H
ACTUATORS
PC TERMINALS
1
ON
NONE
OFF
A
.098” (2.5mm) Long
2
ON
NONE
ON
B
Flush
*B
Straight with Bracket
3
ON
OFF
ON
C
.150” (3.8mm) Long
*H
Right Angle with Bracket
4
ON
ON
P
Straight
*V
ON
Vertical with Bracket
* Bracketed models are
ESD protected
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
AS22AH
DPDT
ON-NONE-ON Circuit
.098” (2.5mm) Long
Actuator
Right Angle PC Terminals
POLES & CIRCUITS
Slide Position
Connected Terminals
Throw & Schematics
Left
Center
Right
Left
Center
Right
Note: Terminal numbers are not
actually on the switch.
Pole
Model
SP
AS11
ON
NONE
OFF
3-1
OPEN
OPEN
SPST
SP
AS12
AS13
ON
ON
NONE
OFF
ON
ON
2-1
2-1
OPEN
OPEN
2-3
2-3
SPDT
AS22
AS23
ON
ON
NONE
OFF
ON
ON
2-1 5-4
2-1 5-4
OPEN
OPEN
2-3 5-6
2-3 5-6
DPDT
DP
1
3
INTERNAL
CONNECTION
2 (COM)
1
3
(COM)
2
1
3
5
6
4
For 3 Throw (3-On)
Connected Terminals & Schematics
Pole
SP
Model
AS24
Left
Center
Right
ON
ON
ON
External
Connection
5
2 (in)
1 (out)
External Connection
3 4 (out) 6 (out)
2-1 5-4
External
Connection
5
2 (in)
1 (out)
3 4 (out) 6 (out)
2-3 5-4
External
Connection
5
2 (in)
1 (out)
3 4 (out) 6 (out)
2-3 5-6
The SP3T model utilizes
a double pole base.
External
connections
must be
made
during field
installation.
(out)
(out)
Common
(in)
1
4
2
5
3
6
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
External
Conn
(out)
03-07
Subminiature Slides
Series AS
ACTUATORS
.098” (2.5mm) Long
A
(2.5)
.098
Flush
B
(2.4)
.094
(2.4)
.094
(2.4)
.094
(2.4)
.094
.150” (3.8mm) Long
C
(3.8)
.150
(2.4)
.094
(2.4)
.094
Actuator Color: Gray standard; contact factory for other colors.
PC TERMINALS
P
(5.08) Typ
.200
Straight
with Bracket
B
Straight
(5.08)
.200
(5.08)
.200
(0.3) Typ
.012
(2.54) Typ
.100
(0.6) Dia Typ
.024
H
(10.16)
.400
Right Angle
with Bracket
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.7) Typ
.028
(9.0)
.354
(8.8)
.346
(5.08)
.200
(2.54) Typ
.100
(5.08)
.200
(0.3)
.012
(5.08)
.200 (0.3)
.012 (0.7)
.028
(0.5)
.020
(8.8)
.346
Vertical
with Bracket
(2.54) Typ
.100 (0.6) Dia Typ
.024
(2.54) Typ
.100
(0.8)
.031
(9.0)
.354
V
(8.8)
.346
(0.6) Dia Typ
.024
(0.5) Typ
.020
(0.7)
.028
(9.0)
.354
(9.0)
.354
(8.8)
.346
Use of a support bracket is recommended to increase PCB mounting strength and stability.
TYPICAL SWITCH DIMENSIONS
Straight PC
Single Pole
(2.4) Sq
.094
(0.4) Typ
.016
(2.06)
.081
P/N This Side
(0.6) Dia Typ
.024
(9.8)
.386
2
3
(0.3)
.012
(2.5) Travel
.098
(2.5)
.098
(5.38)
.212
AS12AP
(0.8)
.031
(9.1)
.358
(2.54) Typ
.100
CL
(2.54) Typ
.100
(0.8) Dia Typ
.031
Single throw models do not have terminal 2.
Double Pole
(0.4) Typ
.016
(2.4) Sq
.094
(0.4)
.016
(2.06)
.081
P/N This Side
(2.5) Travel
.098
(9.2)
.362
(2.5)
.098
AS22AP
(0.8)
.031
(9.1)
.358
(0.6) Dia Typ
.024
1
4
2
5
3
6
(2.54) Typ
.100
(3.1)
.122
(9.8)
.386
4
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(0.8) Dia Typ
.031
(5.08)
.200
Actuator shown in LEFT position
Straight PC • Bracket
Single Pole
(2.4) Sq
.094
(2.06)
.081
P/N This Side
(0.3) Typ
.012
(0.6) Dia Typ
.024
(10.16)
.400
(5.7)
.224
AS12AB
3
CL
Actuator shown in LEFT position
Straight PC
2
(1.0)
.039
(3.1)
.122
(1.0)
.039
1
1
(0.3)
.012
(2.5) Travel
.098
(2.5)
.098
(0.8)
.031
(9.1)
.358
(3.1)
.122
1
1
(9.8)
.386
2
3
(2.54) Typ
.100
Actuator shown in LEFT position
(1.0)
.039
(0.7) Typ
.028
CL
(1.0)
.039
(2.54)
.100
(2.54) Typ
.100
2
3
CL
(0.8) Dia Typ
.031
(2.54)
.100
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Subminiature Slides
Series AS
TYPICAL SWITCH DIMENSIONS
Straight PC • Bracket
Double Pole
P/N This Side
(2.06)
.081
(2.4) Sq
.094
(0.3) Typ
.012
(0.6) Dia Typ
.024
(10.16)
.400
(0.4)
.016
(2.5) Travel
.098
(0.8)
.031
(9.1)
.358
(2.5)
.098
(9.5)
.374
1
4
2
5
3
6
Right Angle PC
(2.54) Typ
.100
4
1
5
2
6
3
(0.8) Dia Typ
.031
(0.7) Typ
.028
(5.08)
.200
(3.1)
.122
(2.54) Typ
.100
Single Pole
(2.5) Travel
.098
(2.06)
.081
P/N This Side
(2.4) Sq
.094
(0.8)
.031
(3.3)
.131
(0.3)
.012
(0.3) Typ
.012
(5.08)
.200
3
(0.7)
.028
(9.8)
.386
(9.9)
.389
(2.5)
.098
2
1
(3.1)
.122
(5.08)
.200
(6.18)
.243
1
2
3
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
Actuator shown in LEFT position
AS12AH
(2.5) Travel
.098
(2.06)
.081
Double Pole
(2.4) Sq
.094
P/N This Side
(0.4)
.016
(0.3) Typ
.012
(5.08)
.200
(0.8)
.031
(5.2)
.205
(0.7)
.028
(9.8)
.386
(2.5)
.098
(12.4)
.489
(2.54)
.100
(5.08)
.200
3
2
1
6
5
4
(3.1)
.122
(0.5)
.020
(10.0)
.394
1
2
(2.54) Typ
.100
(2.54)
3
.100
4
5
6
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
Actuator shown in LEFT position
AS22AH
Vertical PC
Single Pole
(2.4) Sq
.094
(0.4)
.016
(2.06)
.081
(0.8)
.031
P/N This Side
1
(5.3)
.208
(2.5) Travel
.098
(0.3) Typ
.012
(2.54)
.100
(0.7) Typ
.028
(2.54)
.100
(2.54)
.100
(5.7)
.224
(2.5)
.098
(15.0)
.589
(10.2)
.402
2
3
(1.0)
.039
(2.54) Typ
.100
1
2
3
(0.5)
.020
(1.0)
(3.1)
.039
.122
(2.54) Typ
.100
(0.6) Dia Typ
.024
(1.0)
.039
(0.8) Dia Typ
.031
(2.54)
.100
CL
CL
Actuator shown in LEFT position
AS12AV
Vertical PC
Double Pole
(0.4)
.016
(2.4) Sq
.094
(0.3) Typ
.012
(5.08)
.200
AS22AV
(9.8)
.386
Actuator shown in LEFT position
AS22AB
Right Angle PC
(5.08)
.200
(9.5)
.374
(2.06)
.081
(2.5) Travel
.098
(0.7)
.028
(5.08)
.200
(2.5)
.098
P/N This Side
(0.8)
.031
(5.3)
.208
(15.0)
.589
(1.0) (0.5) (3.1)
.039 .020 .122
(2.54) Typ
.100
1
4
2
5
3
6
4
(10.2)
.402
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(5.08)
.200
(0.6) Dia Typ
.024
(5.08)
.200
(0.8) Dia Typ
.031
Actuator shown in LEFT position
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Similar pages