ALSC ASM2P2309NZ-16-SR Nine output 3.3v buffer Datasheet

ASM2P2309NZ
June 2005
rev 0.2
Nine Output 3.3V Buffer
Features
Functional Description
One-input to Nine-Output Buffer/Driver
Supports two DIMMs or four SO-DIMMs with one
The ASM2P2309NZ is a low-cost buffer designed to
additional output for feedback to an external or
distribute high-speed clocks in mobile PC systems and
chipset PLL
desktop PC systems with SDRAM support. The part has
Low power consumption for mobile applications
nine outputs, eight of which can be used to drive two
Less than 32mA at 66.6MHz with unloaded
DIMMs or four SO-DIMMs, and the remaining can be used
outputs
for external feedback to a PLL. The device operates at
1nS Input-Output delay
3.3V and outputs can run up to 133.33MHz.
Buffers all frequencies from DC to 133.33MHz
Output-output skew less than 250pS
The ASM2P2309NZ is designed for low EMI and power
Multiple VDD and VSS pins for noise and
optimization. It has multiple VSS and VDD pins for noise
electromagnetic interference (EMI) reduction
optimization and consumes less than 32mA at 66.6MHz,
Space-saving 16-pin 150-mil SOIC Package
making it ideal for the low-power requirements of mobile
3.3V operation
systems. It is available in an ultra-compact 150-mil 16-pin
Commercial and Industrial temperature parts are
SOIC Package.
available
Block Diagram
BUF_IN
OUTPUT1
OUTPUT2
OUTPUT3
OUTPUT4
OUTPUT5
OUTPUT6
OUTPUT7
OUTPUT8
OUTPUT9
Alliance Semiconductor
2575 Augustine Drive • Santa Clara, CA • Tel: 408.855.4900 • Fax: 408.855.4999 • www.alsc.com
Notice: The information in this document is subject to change without notice.
ASM2P2309NZ
June 2005
rev 0.2
Pin Configuration
BUF_IN
1
16
OUTPUT9
OUTPUT1
2
15
OUTPUT8
OUTPUT2
3
14
OUTPUT7
VDD
4
13
VDD
ASM2P2309NZ
GND
5
12
GND
OUTPUT3
6
11
OUTPUT6
OUTPUT4
7
10
OUTPUT5
VDD
8
9
GND
Pin Description
Pin
Signal
Description
4, 8, 13
VDD
3.3V Digital Voltage Supply
5, 9, 12
GND
Ground
1
BUF_IN
Input Clock
2, 3, 6, 7, 10, 11, 14, 15, 16
OUTPUT [1:9]
Outputs
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
2 of 9
ASM2P2309NZ
June 2005
rev 0.2
Absolute Maximum Ratings
Parameter
Min
Max
Unit
Supply Voltage to Ground Potential
-0.5
7.0
V
DC Input Voltage (Except BUF_IN)
-0.5
VDD + 0.5
V
Storage Temperature
-65
+150
°C
150
°C
>2000
V
Junction Temperature
Static Discharge Voltage
(As per JEDEC STD22- A114-B)
Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device
reliability.
Operating Conditions
Parameter
VDD
TA
CL
CIN
Description
Supply Voltage
(Ambient Operating Temperature), Commercial
Min
Max
Unit
3.0
3.6
V
0
70
°C
–40
85
°C
Load Capacitance, Fout < 100MHz
-
30
pF
Load Capacitance,100MHz < Fout < 133.33MHz
-
15
pF
Input Capacitance
-
7
pF
(Ambient Operating Temperature), Industrial
BUF_IN, OUTPUT [1:9]
Operating Frequency
DC
133.33
MHz
tPU
Power-up time for all VDD's to reach minimum
specified voltage (power ramps must be monotonic)
0.05
50
mS
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
3 of 9
ASM2P2309NZ
June 2005
rev 0.2
Electrical Characteristics for Commercial and Industrial Temperature Devices
Parameter
Description
Min
Max
Unit
1
Test Conditions
-
0.8
V
1
2.0
-
V
VIL
Input LOW Voltage
VIH
Input HIGH Voltage
IIL
Input LOW Current
VIN = 0V
-
50.0
MA
IIH
VOL
Input HIGH Current
2
Output LOW Voltage
VIN= VDD
IOL= 8 mA
-
100.0
0.4
MA
V
VOH
Output HIGH Voltage
IOH = –8 mA
2.4
-
V
IDD
Supply Current
Unloaded outputs at 66.66MHz
-
32
mA
2
Switching Characteristics for Commercial and Industrial Temperature Devices
Parameter
Name
tD
Duty Cycle = t2 ÷t1
3
Description
Min
Typ
Max
Unit
Measured at 1.4V
40.0
50.0
60.0
%
2
Measured between 0.8V and 2.0V
-
-
1.50
nS
2
Measured between 0.8V and 2.0V
-
-
1.50
nS
All outputs equally loaded
-
-
250
pS
Measured at VDD/2
1
5
9.2
nS
2
t3
Rise Time
t4
Fall Time
2
t5
Output to Output Skew
t6
Propagation Delay,
BUF_IN Rising Edge to
2
OUTPUT Rising Edge
Note:
1. BUF_IN input has a threshold voltage of VDD/2.
2. Parameter is guaranteed by design and characterization. It is not 100% tested in production.
3. All parameters specified with loaded outputs.
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
4 of 9
ASM2P2309NZ
June 2005
rev 0.2
Switching Waveforms
Duty Cycle Timing
All Outputs Rise/Fall Time
Output-Output Skew
Input-Output Propagation Delay
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
5 of 9
ASM2P2309NZ
June 2005
rev 0.2
Test Circuits
VDD
0.1uF
CLKOUT
OUTPUTS
CLOAD
VDD
0.1uF
GND
GND
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
6 of 9
ASM2P2309NZ
June 2005
rev 0.2
Package Information
16-lead (150 Mil) Molded SOIC Package
PIN 1 ID
1
8
H
E
9
16
D
h
Seating Plane
A2
D
A
e
C
0.004
L
A1
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
0.053
0.069
1.35
1.75
A1
0.004
0.010
0.10
0.25
A2
0.049
0.059
1.25
1.50
B
0.013
0.022
0.33
0.53
C
0.008
0.012
0.19
0.27
D
0.386
0.394
9.80
10.01
E
0.150
0.157
3.80
4.00
e
0.050 BSC
1.27 BSC
H
0.228
0.244
5.80
6.20
h
0.010
0.016
0.25
0.41
L
0.016
0.035
0.40
0.89
P
0°
8°
0°
8°
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
7 of 9
ASM2P2309NZ
June 2005
rev 0.2
Ordering Codes
Part Number
ASM2P2309NZF-16-ST
Marking
2P2309NZF
Package Type
Operating Range
16-pin 150-mil SOIC, Pb Free
Commercial
Commercial
ASM2P2309NZF-16-SR
2P2309NZF
16-pin 150-mil SOIC, Tape and Reel, Pb Free
ASM2I2309NZF-16-ST
2I2309NZF
16-pin 150-mil SOIC, Pb Free
Industrial
ASM2I2309NZF-16-SR
2I2309NZF
16-pin 150-mil SOIC, Tape and Reel, Pb Free
Industrial
ASM2P2309NZG-16-ST
2P2309NZG
16-pin 150-mil SOIC, Green
Commercial
ASM2P2309NZG-16-SR
2P2309NZG
16-pin 150-mil SOIC, Tape and Reel, Green
Commercial
ASM2I2309NZG-16-ST
2I2309NZG
16-pin 150-mil SOIC, Green
ASM2I2309NZG-16-SR
2I2309NZG
16-pin 150-mil SOIC ,Tape and Reel, Green
ASM2P2309NZ-16-ST
2P2309NZ
16-pin 150-mil SOIC
Commercial
Commercial
Industrial
Industrial
ASM2P2309NZ-16-SR
2P2309NZ
16-pin 150-mil SOIC, Tape and Reel
ASM2I2309NZ-16-ST
2I2309NZ
16-pin 150-mil SOIC
Industrial
ASM2I2309NZ-16-SR
2I2309NZ
16-pin 150-mil SOIC ,Tape and Reel
Industrial
Device Ordering Information
A S M 2 P 2 3 0 9 N Z
F - 1 6 - S R
R = Tape & reel, T = Tube or Tray
O = SOT
S = SOIC
T = TSSOP
A = SSOP
V = TVSOP
B = BGA
Q = QFN
U = MSOP
E = TQFP
L = LQFP
U = MSOP
P = PDIP
D = QSOP
X = SC-70
DEVICE PIN COUNT
F = LEAD FREE AND RoHS COMPLIANT PART
G = GREEN PACKAGE
PART NUMBER
X= Automotive
I= Industrial
P or n/c = Commercial
(-40C to +125C) (-40C to +85C)
(0C to +70C)
1=
2=
3=
4=
5=
Reserved
Non PLL based
EMI Reduction
DDR support products
STD Zero Delay Buffer
6 = Power Management
7 = Power Management
8 = Power Management
9 = Hi Performance
0 = Reserved
ALLIANCE SEMICONDUCTOR MIXED SIGNAL PRODUCT
Licensed under US patent #5,488,627, #6,646,463 and #5,631,920.
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
8 of 9
ASM2P2309NZ
June 2005
rev 0.2
Alliance Semiconductor Corporation
2575 Augustine Drive,
Santa Clara, CA 95054
Tel# 408-855-4900
Fax: 408-855-4999
www.alsc.com
Copyright © Alliance Semiconductor
All Rights Reserved
Part Number: ASM2P2309NZ
Document Version: 0.2
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to Alliance Semiconductor, dated 11-11-2003
© Copyright 2003 Alliance Semiconductor Corporation. All rights reserved. Our three-point logo, our name and Intelliwatt are
trademarks or registered trademarks of Alliance. All other brand and product names may be the trademarks of their
respective companies. Alliance reserves the right to make changes to this document and its products at any time without
notice. Alliance assumes no responsibility for any errors that may appear in this document. The data contained herein
represents Alliance's best data and/or estimates at the time of issuance. Alliance reserves the right to change or correct this
data at any time, without notice. If the product described herein is under development, significant changes to these
specifications are possible. The information in this product data sheet is intended to be general descriptive information for
potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. Alliance does not assume any responsibility or liability arising out of the application or use of any product
described herein, and disclaims any express or implied warranties related to the sale and/or use of Alliance products
including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual
property rights, except as express agreed to in Alliance's Terms and Conditions of Sale (which are available from Alliance).
All sales of Alliance products are made exclusively according to Alliance's Terms and Conditions of Sale. The purchase of
products from Alliance does not convey a license under any patent rights, copyrights; mask works rights, trademarks, or any
other intellectual property rights of Alliance or third parties. Alliance does not authorize its products for use as critical
components in life-supporting systems where a malfunction or failure may reasonably be expected to result in significant
injury to the user, and the inclusion of Alliance products in such life-supporting systems implies that the manufacturer
assumes all risk of such use and agrees to indemnify Alliance against all claims arising from such use.
Nine Output 3.3V Buffer
Notice: The information in this document is subject to change without notice.
9 of 9
Similar pages