AVAGO ASSR-1520-302E High current, solid state relay (photo mosfet) Datasheet

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530
High Current, Solid State Relay (Photo MOSFET)
(60V/1.0A/0.5)
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
The ASSR-15XX Series is specifically designed for high
current applications, commonly found in the industrial
applications.
 Compact Solid-State Bi-directional Signal Switch
The ASSR-15XX Series consists of an AlGaAs infrared
light-emitting diode (LED) input stage optically
coupled to a high-voltage output detector circuit. The
detector consists of a high-speed photovoltaic diode
array and driver circuitry to switch on/off two discrete
high voltage MOSFETs. The relay turns on (contact
closes) with a minimum input current of 3mA through
the input LED. The relay turns off (contact opens) with
an input voltage of 0.8V or less.
 60V Output Withstand Voltage
The single channel configurations, ASSR-1510 and
ASSR-1511, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration,
ASSR-1520 and ASSR-1530, is equivalent to 2 Form A
EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP
and Gull Wing Surface Mount for DIP packages and true
surface mount SO-8pin. Their electrical and switching
characteristics are specified over the temperature
range of -40°C to +85°C.
ASSR-1511 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io,
increases to 2A and the on-resistance, R(ON) reduces to
0.2.
 Single and Dual Channel Normally-off Single-PoleSingle-Throw (SPST) Relay
 1.0A or 2.0A Current Rating
(See Schematic for ASSR-1511 Connections A & B)
 Low Input Current: CMOS Compatibility
 Low On-Resistance:
0.12 Typical for DC-only, 0.35 Typical for AC/DC
 Very High Output Off-state Impedance:
10 Teraohms Typical
 High Speed Switching: 0.25ms (Ton), 0.02ms (Toff )
Typical
 High Transient Immunity: >1kV/s
 High Input-to-Output Insulation Voltage
(Safety and Regulatory Approvals)
- 3750 Vrms for 1 min per UL1577
- CSA Component Acceptance
Applications
 Industrial Controls
 Factory Automation
Functional Diagram
 Data Acquisition System
 Measuring Instrument
Opto-isolation
 Medical System
1
4
Turn-off
Circuit
2
3
Truth Table
LED
Output
Off
Open
On
Close
 Security System
 EMR / Reed Relay Replacement
Single Channel, SPST Relay,
1 Form A in 4-Pin SO Package
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5.
Option
Part number
RoHS Compliant
Package
-003E
ASSR-1510
Surface Mount
SO-4
-503E
Gull Wing
Tape & Reel
X
X
X
1500 units per reel
-001E
50 units per tube
300mil
DIP-6
-301E
ASSR-1511
-501E
X
X
X
X
X
X
X
X
50 units per tube
X
1000 units per reel
-002E
ASSR-1520
50 units per tube
300 mil
DIP-8
-302E
-502E
-005E
ASSR-1530
Quantity
100 units per tube
X
1000 units per reel
X
1000 units per reel
X
SO-8
-505E
50 units per tube
50 units per tube
X
To order see attached table, choose a part number from the part number column and combine with the desired
option from the option column to form an order entry.
Example 1:
ASSR-1511-501E to order product of 300mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging
and RoHS Compliant.
Example 2:
ASSR-1520-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Schematic
ASSR-1510
Opto-isolation
Opto-isolation
1
4
2
4
2
3
Equivalent
Relay
Diagram
Turn-oCircuit
2
1
3
Schematics (Cont.)
ASSR-1511 Connection A
Opto-isolation
Opto-isolation
6
1
Turn-oCircuit
2
Equivalent
Relay
Diagram
5
Vo
1
6
2
4
4
3
ASSR-1511 Connection B
Opto-isolation
Opto-isolation
1
6
+
Vo
5
Turn-oCircuit
2
-
1
4 and 6
2
5
Equivalent
Relay
Diagram
3
4
ASSR-1520 and ASSR-1530
Opto-isolation
Opto-isolation
8
1
Turn-oCircuit
2
7
3
6
Turn-oCircuit
4
3
5
Equivalent
Relay
Diagram
1
8
2
7
3
6
4
5
Package Outline Drawings
ASSR-1510 4-Pin Small Outline Package
LAND PATTERN RECOMMENDATION
2.54
(0.100)
0.80
(0.031)
TYPE NUMBER
LEAD FREE
1.20
(0.047)
DATE CODE
xxxx
YWW
4.40 ± 0.20
(0.173 ± 0.008 )
0.375
(0.015)
4.80
(0.189)
6.8 ± 0.016
(0.268 ± 0.016)
2.540
(0.10)
0.41
(0.016)
2.0 ± 0.2
(0.079 ± 0.009 )
4.3 ± 0.2
(0.169 ± 0.008 )
0.46
(0.018)
0.20
(0.008)
0.5
(0.02)
DIMENSIONS IN MILLIMETERS AND (INCHES)
OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED
0.102 ± 0.102
(0.004 ± 0.004 )
ASSR-1511 6-Pin DIP Package
7.36 (0.290)
7.88 (0.310)
9.40 (0.370)
9.90 (0.390)
6
5
TYPE
NUMBER
4
LEAD FREE
A XXXX
YYWW
PIN
ONE
DOT
1
2
0.20 (0.008)
0.33 (0.013)
DATE CODE
UL
RECOGNITION
RU
5 ° TYP.
3
6.10 (0.240)
6.60 (0.260)
1.78 (0.070) MAX.
4.70 (0.185) MAX.
(0.020)
(0.040)
2.66 (0.105) MIN.
2.16 (0.085)
2.54 (0.100)
0.45 (0.018)
0.65 (0.025)
2.28 (0.090)
2.80 (0.110)
DIMENSIONS IN MILLIMETERS AND (INCHES).
4
0.5
(0.02)
ASSR-1511 6-Pin DIP Package with Gull Wing Surface Mount Option 300
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
10.9 (0.430)
6.35 ± 0.25
(0.250 ± 0.010)
1.27 (0.050)
2.0 (0.080)
9.65 ± 0.25
(0.380 ± 0.010)
1.78
(0.070)
MAX.
0.635 ± 0.130
(0.025 ± 0.005)
7.62 ± 0.25
(0.300 ± 0.010)
0.20 (0.008)
0.30 (0.013)
4.19
MAX.
(0.165)
0.635 ± 0.25
(0.025 ± 0.010)
2.54
(0.100)
TYP.
2.29
(0.090)
12 ° NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
ASSR-1520 8-Pin DIP Package
7.62 ± 0.25
(0.300 ± 0.010)
9.65 ± 0.25
(0.380 ± 0.010)
TYPE NUMBER
8
7
6
5
YYWW
1
1.19 (0.047) MAX.
2
6.35 ± 0.25
(0.250 ± 0.010)
DATE CODE
A XXXX
LEAD FREE
OPTION CODE*
3
RU
4
UL
RECOGNITION
1.78 (0.070) MAX.
5° TYP.
3.56 ± 0.13
(0.140 ± 0.005)
4.70 (0.185) MAX.
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
0.51 (0.020) MIN.
2.92 (0.115) MIN.
1.080 ± 0.320
(0.043 ± 0.013)
5
0.65 (0.025) MAX.
2.54 ± 0.25
(0.100 ± 0.010)
DIMENSIONS IN MILLIMETERS AND (INCHES).
OPTION NUMBERS 300 AND 500 NOT MARKED.
ASSR-1520 8-Pin DIP Package with Gull Wing Surface Mount Option 300
LAND PATTERN RECOMMENDATION
9.65 ± 0.25
(0.380 ± 0.010)
8
7
6
1.016 (0.040)
5
6.350 ± 0.25
(0.250 ± 0.010)
1
2
3
10.9 (0.430)
4
2.0 (0.080)
1.27 (0.050)
9.65 ± 0.25
(0.380 ± 0.010)
1.780
(0.070)
MAX.
1.19
(0.047)
MAX.
7.62 ± 0.25
(0.300 ± 0.010)
3.56 ± 0.13
(0.140 ± 0.005)
1.080 ± 0.320
(0.043 ± 0.013)
0.635 ± 0.25
(0.025 ± 0.010)
0.635 ± 0.130
(0.025 ± 0.005)
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
+ 0.076
0.254 - 0.051
+ 0.003)
(0.010 - 0.002)
12° NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
ASSR-1530 8-Pin Surface Mount Package
LAND PATTERN RECOMMENDATION
TYPE NUMBER
DATE CODE
0.100
2.54
0.047
1.20
LEAD FREE
0.173 ± 0.008
4.40 ± 0.20
A XXXX
YYWW
0.031
0.80
0.268 ± 0.016
6.81 ± 0.40
0.189
4.80
[0.015]
0.375
0.016
0.41
0.100
2.54
0.369 ± 0.008
9.4 ± 0.2
0.008
0.20
0.079 ± 0.008
2 ± 0.2
0.020
0.51
DIMENSIONS IN MILLIMETERS AND [INCHES]
6
0.004 ± 0.004
0.102 ± 0.102
0.018
0.46
Lead Free IR Profile
tp
TEMPERATURE (°C)
Tp
TL
TIME WITHIN 5°C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
260 +0/-5°C
217°C
RAMP-UP
3°C/SEC. MAX.
150 - 200°C
T smax
RAMP-DOWN
6°C/SEC. MAX.
T smin
ts
PREHEAT
60 to 180 SEC.
tL
60 to 150 SEC.
25
t 25°C to PEAK
TIME (SECONDS)
NOTES:
THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200°C, Tsmin = 150°C
Use of non-chlorine-activated fluxes is highly recommended.
Regulatory Information
The ASSR-1510, ASSR-1511, ASSR-1520 and ASSR-1530 are approved by the following organizations:
UL
Approved under UL 1577, component recognition program up to VISO = 3750 VRMS
CSA
Approved under CSA Component Acceptance Notice #5.
Insulation and Safety Related Specifications
Parameter
Symbol
ASSR-1510
ASSR-1511
ASSR-1520
ASSR-1530
Units
Conditions
Minimum External
Air Gap (Clearance)
L(101)
4.9
7.1
4.9
mm
Measured from input terminals to output
terminals, shortest distance through air.
Minimum External
Tracking (Creepage)
L(102)
4.9
7.4
4.8
mm
Measured from input terminals to output
terminals, shortest distance path along body.
0.08
0.08
0.08
mm
Through insulation distance conductor to
conductor, usually the straight line
distance thickness between the emitter and
detector.
175
175
175
V
DIN IEC 112/VDE 0303 Part 1
IIIa
IIIa
IIIa
Minimum Internal
Plastic Gap
(Internal Clearance)
Tracking Resistance
(Comparative
Tracking Index)
Isolation Group
(DIN VDE0109)
7
CTI
Material Group (DIN VDE 0109)
Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Units
Storage Temperature
TS
-55
125
C
Operating Temperature
TA
-40
85
C
Junction Temperature
TJ
125
C
260
C
10
s
25
mA
Lead Soldering Cycle
Temperature
Input Current
Average
Time
IF
Surge
50
Transient
1000
VR
5
V
ASSR-1510
PIN
40
mW
ASSR-1511
PIN
40
mW
ASSR-1520
ASSR-1530
PIN
80
mW
ASSR-1510
PO
500
mW
ASSR-1511
PO
800
mW
ASSR-1520
ASSR-1530
PO
700
mW
IO
1.0
A
IO
2.0
A
Reversed Input Voltage
Input Power Dissipation
Output Power Dissipation
Average Output Current
(TA = 25°C, TC  100°C)
Note
ASSR-1511
Connection B
Output Voltage (TA = 25°C)
ASSR-1511
Connection B
Solder Reflow Temperature Profile
1
VO
-60
60
V
2
VO
0
60
V
2
See Lead Free IR Profile
Recommended Operating Conditions
Parameter
Symbol
Min.
Max.
Units
Note
Input Current (ON)
IF(ON)
3
20
mA
3
Input Voltage (OFF)
VF(OFF)
0
0.8
V
Operating Temperature
TA
-40
+85
C
Package Characteristics
Unless otherwise specified, TA = 25°C.
Parameter
Sym.
Min.
Input-Output Momentary
Withstand Voltage
VISO
3750
Input-Output Resistance
RI-O
ASSR-1510
Typ.
Max.
Units
Conditions
Note
Vrms
RH  50%,
t = 1 min
4, 5
1012

VI-O = 500 Vdc
CI-O
0.4
pF
f = 1 MHz; VI-O = 0 Vdc
ASSR-1511
CI-O
0.5
pF
f = 1 MHz; VI-O = 0 Vdc
ASSR-1520
ASSR-1530
CI-O
0.8
pF
f = 1 MHz; VI-O = 0 Vdc
Input-Output Capacitance
8
4
Electrical Specifications (DC)
Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specified.
Parameter
Sym.
Min.
Typ.
Output Withstand
Voltage
|VO(OFF)|
60
65
Output Leakage
Current
IO(OFF)
0.5
Output Offset
Voltage
|V(OS)|
1
Input Reverse
Breakdown Voltage
VR
5
Input Forward
Voltage
VF
1.1
Output
On-resistance
Max.
Units
Conditions
V
VF =0.8V, IO=250 A, TA=25C
V
VF =0.8V, IO=250 A
100
nA
VF =0.8V, VO=60V, TA=25C
1
A
VF =0.8V, VO=60V
V
IF =5mA, IO=0mA
V
IR =10 A
55
Fig.
Note
5
6
1.3
1.65
V
IF =5mA
8, 9
R(ON)
0.35
0.5

IF =5mA, IO=1A,
Pulse 30ms, TA=25C
10, 11
ASSR-1511
Connection B
R(ON)
0.12
0.2

IF =5mA, IO=2A,
Pulse 30ms, TA=25C
6
Switching Specifications (AC)
Over recommended operating TA = -40°C to 85°C, IF = 5mA to 10mA, unless otherwise specified.
Parameter
Sym.
Turn On Time
TON
Turn Off Time
Min.
TOFF
Typ.
Max.
Units
Conditions
Fig.
0.5
1.0
ms
IF =5mA, IO=1A, TA=25C
12, 16
2.0
ms
IF =5mA, IO=1A
13
0.25
0.5
ms
IF =10mA, IO=1A, TA=25C
1.0
ms
IF =10mA, IO=1A
0.03
0.2
ms
IF =5mA, IO=1A, TA=25C
14, 16
0.5
ms
IF =5mA, IO=1A
15
0.15
ms
IF =10mA, IO=1A, TA=25C
0.2
ms
IF =10mA, IO=1A
0.02
Output Transient
Rejection
dVO/dt
1
7
kV/s
VO=60V, TA=25C
17
Input-Output
Transient Rejection
dVI-O/dt
1
10
kV/s
VI-O=1000V, TA=25C
18
Note
Notes:
1. For derating, refer to Figure 1, 2, 3 and 4.
2. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Over-voltage protection circuits should
be added in some applications to protect against over-voltage transients.
3. Threshold to switch device is IF  0.5mA, however, for qualified device performance over temperature range, it is recommended to operate at
IF =5mA.
4. Device is considered as a two terminal device:
ASSR-1510 - pin 1, 2 shorted and pin 3, 4 shorted.
ASSR-1511 - pin 1, 2, 3 shorted and pin 4, 5, 6 shorted.
ASSR-1520 and ASSR-1530 - pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted.
5. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your
equipment level safety specification, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage.”
6. During the pulsed R(ON) measurement ( IO duration 30ms), ambient (TA) and case temperature (TC) are equal.
9
Applications Information
On-Resistance and Derating Curves
The Output On-Resistance, R(ON), specified in this data
sheet, is the resistance measured across the output
contact when a pulsed current signal (Io=1A) is applied
to the output pins. The use of a pulsed signal (≤ 30ms)
implies that each junction temperature is equal to
the ambient and case temperatures. The steady-state
resistance, Rss, on the other hand, is the value of the
resistance measured across the output contact when
a DC current signal is applied to the output pins for
a duration sufficient to reach thermal equilibrium.
Rss includes the effects of the temperature rise in the
device.
Turn On Time and Turn Off Time Variation
The ASSR-15xx Series exhibits a very fast turn on and
turn off time. Both the turn on and turn off time can
be adjusted by choosing proper forward current as
depicted in Figures 12 and 14. The changes of the turn
on and turn off time with ambient temperature are also
shown in Figures 13 and 15.
IF = 10mA, 4-Layer Board
0.8
Safe
Operating
Area
0.6
IF = 10mA, 4-Layer Board
1
IO - OUTPUT CURRENT - A
1
IO - OUTPUT CURRENT - A
Derating curves are shown in Figures 1, 2, 3 and 4,
specifying the maximum output current allowable for
a given ambient temperature. The maximum allowable
output current and power dissipation are related by the
expression Rss=Po(max)/(Io(max))2 from which Rss can
be calculated. Staying within the safe area assures that
the steady state MOSFET junction temperature remains
less than 125°C.
0.4
0.2
0.8
Safe
Operating
Area
0.6
0.4
0.2
0
0
-40
-20
0
20
40
60
TA - TEMPERATURE - °C
80
100
Figure 1. Maximum Output Current Rating vs Ambient Temperature
(ASSR-1510-003E)
2
-40
-20
20
40
60
80
TA - TEMPERATURE - °C
Figure 2. Maximum Output Current Rating vs Ambient Temperature
(ASSR-1511-001E)
100
IF = 10mA, 4-Layer Board
1.0
IF = 10mA, 4-Layer Board
0
IO - OUTPUT CURRENT - A
IO - OUTPUT CURRENT - A
1-Channel
1.5
Safe
Operating
Area
1
0.5
2-Channel
0.6
Safe
Operating
Area
0.4
0.2
0
0
-40
-20
0
20
40
60
TA - TEMPERATURE - °C
80
Figure 3. Maximum Output Current Rating vs Ambient Temperature
(ASSR-1511-001E DC Connection)
10
0.8
100
-40
-20
0
20
40
TA - TEMPERATURE - °C
60
80
Figure 4. Maximum Output Current Rating vs Ambient Temperature
(ASSR-1520-002E and ASSR-1530-005E)
100
1.E-04
IO = 250A
VF = 0.8V
IO (OFF) - OUTPUT LEAKAGE CURRENT - A
NORMALIZED OUTPUT WITHSTAND VOLTAGE
1.1
1.05
1
0.95
0.9
0
25
50
75
100
TA - TEMPERATURE - °C
Figure 5. Normalized Typical Output Withstand Voltage vs. Temperature
-25
1.E-08
1.E-09
1.E-10
1.E-11
200
1.5
160
1.4
120
80
40
100
IF = 10mA
1.3
1.2
IF = 5mA
1.1
1
0
30
40
VO (OFF) - OUTPUT VOLTAGE - V
Figure 7. Output Capacitance vs. Output Voltage
10
20
18
16
14
12
10
8
6
4
2
0
20
50
60
-50
0
25
50
TA - TEMPERATURE - °C
Figure 8. Typical Forward Voltage vs. Temperature
-25
75
100
650
IF = 5mA
TA = -40°C
RON - ON RESISTANCE - mW
IF - FORWARD CURRENT - mA
1.E-07
0
50
TA - TEMPERATURE - °C
Figure 6. Typical Output Leakage Current vs. Temperature
0
TA = 0°C
TA = 25°C
TA = 85°C
0.4
0.8
1.0
1.2
VF - FORWARD VOLTAGE - V
Figure 9. Typical Forward Current vs. Forward Voltage
11
1.E-06
-50
VF - FORWARD VOLTAGE - V
COUT - OUTPUT CAPACITANCE - pF
-50
1.E-05
0.6
1.4
1.6
550
450
IF = 10mA
350
250
150
-50
0
50
100
TA - TEMPERATURE - °C
Figure 10. Typical On Resistance vs.Temperature
150
200
1200
TA = -40°C
TA = 25°C
TA = 85°C
0.6
1000
TON - TURN ON TIME - S
IO - OUTPUT CURRENT - A
1
0.2
-0.2
-0.6
-1
0.6
0.8
1.0
3
900
55
800
50
700
600
IF = 5mA
500
400
300
IF = 10mA
200
5
10
15
IF(ON) - INPUT CURRENT - mA
20
Figure 12. Typical Turn On Time vs. Input Current
TOFF - TURN OFF TIME - S
Ton - TURN ON TIME - S
400
0
-1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4
VO - OUTPUT VOLTAGE - V
45
40
35
30
25
100
20
0
-40
25
50
TA - TEMPERATURE - °C
Figure 13. Typical Turn On Time vs. Temperature
0
85
50
TOFF - TURN OFF TIME - S
600
200
Figure 11. Typical Output Current vs. Output Voltage
45
40
IF = 5mA
35
30
IF = 10mA
25
20
-40
25
50
TA - TEMPERATURE - °C
Figure 15. Typical Turn Off Time vs. Temperature
12
800
0
85
3
5
10
15
IF(ON) - CONTROL CURRENT - mA
Figure 14. Typical Turn Off Time vs. Input Current
20
PULSE GEN.
Zo = 50 Ω
tf = tr = 5ns
V DD
ASSR-15xx
RL
IF
1
INPUT
MONITORING
NODE
INPUT
IF
OUTPUT Vo
MONITORING
NODE
8
CL*
R
200ohm
2
7
3
6
4
5
( *C L IS APPROXIMATELY 25pF WHICH
INCLUDES PROBE AND STRAY WIRING
CAPACITANCE)
50%
50%
P.W. = 15 ms
90%
OUTPUT
Vo
10%
tON
Figure 16. Switching Test circuit for tON , tOFF
13
tOFF
ASSR-15xx
1
OUTPUT Vo
MONITORING
NODE
8
V
INPUT
OPEN
PEAK
CM
2
7
+
3
6
PULSE GEN.
Zo = 50 Ω
4
5
RM
C M INCLUDES PROBE AND FIXTURE CAPACITANCE
R M INCLUDES PROBE AND FIXTURE RESISTANCE
90%
90%
V PEAK
10%
10%
tR
tF
V M (MAX) < 3V
dV0 (0.8)VPEAK
=
dt
tR
OR
(0.8)VPEAK
tF
_ 10%
OVERSHOOT ON VPEAK IS TO BE <
Figure 17. Output Transient Rejection Test Circuit
14
V DD = 5V
ASSR-15xx
IF
R L = 1kohm
B
1
OUTPUT Vo
MONITORING
NODE
8
CL*
A
2
7
3
6
4
5
( *C L IS APPROXIMATELY 25pF WHICH
INCLUDES PROBE AND STRAY WIRING
CAPACITANCE)
+
V FF
V
I-O
+
PULSE GEN.
Zo = 50 Ω
90%
90%
V I-O(PEAK)
10%
10%
tR
tF
V O(OFF)
V O(OFF) (min.) > 4V
SWITCH AT POSITION "A": IF = 0 mA
V O(ON) (max.) < 0.8V
V O(ON)
SWITCH AT POSITION "B": IF = 5 mA
Figure 18. Input - Output Transient Rejection Test Circuit
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes AV01-0638EN
AV02-0036EN - March 19, 2012
Similar pages