ATMEL AT93C66B-SSHM-B Three-wire serial electrically erasable programmable read-only memory Datasheet

Features
• Low-voltage and standard-voltage operation
– VCC = 1.7V to 5.5V
• User-selectable internal organization
•
•
•
•
•
•
– 2K: 256 x 8 or 128 x 16
– 4K: 512 x 8 or 256 x 16
Three-wire serial interface
Sequential read operation
2MHz clock rate (5V)
Self-timed write cycle (5ms max)
High reliability
– Endurance: One million write cycles
– Data retention: 100 years
8-lead JEDEC SOIC, 8-lead TSSOP, 8-lead UDFN, 8-lead XDFN, and 8-ball VFBGA
packages
Three-wire
Serial Electrically
Erasable
Programmable
Read-only Memory
2K (256 x 8 or 128 x 16)
Description
The Atmel® AT93C56B/66B provides 2048/4096 bits of serial electrically erasable programmable read-only memory (EEPROM) organized as 128/256 words of 16 bits each
(when the ORG pin is connected to VCC) and 256/512 words of 8 bits each (when the
ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The
AT93C56B/66B is available in space-saving 8-lead JEDEC SOIC, 8-lead TSSOP, 8-lead
UDFN, 8-lead XDFN, and 8-ball VFBGA packages.
4K (512 x 8 or 256 x 16)
Atmel AT93C56B
Atmel AT93C66B
The AT93C56B/66B is enabled through the chip select pin (CS) and accessed via a
three-wire serial interface consisting of data input (DI), data output (DO), and shift clock
(SK). Upon receiving a read instruction at DI, the address is decoded and the data is clocked
out serially on the data output pin, DO. The write cycle is completely self-timed, and no separate erase cycle is required before write. The write cycle is only enabled when the part is in
the erase/write enable state. When CS is brought high following the initiation of a write
cycle, the DO pin outputs the ready/busy status of the part.
The AT93C56B/66B operates from 1.7V to 5.5V.
8-lead SOIC
Figure 0-1.
Pin Configurations
Pin Name
Function
CS
Chip Select
SK
Serial Data Clock
DI
Serial Data Input
DO
Serial Data Output
GND
Ground
VCC
Power Supply
ORG
Internal Organization
CS
SK
DI
DO
1
2
3
4
No Connect
VCC
NC
ORG
GND
8
7
6
5
1
2
3
4
CS
SK
DI
DO
VCC
NC
ORG
GND
8
7
6
5
VCC
NC
ORG
GND
8-lead XDFN
8-lead UDFN
8
1 CS
7
2 SK
6
3 DI
5
4 DO
Bottom view
NC
8-lead TSSOP
VCC
NC
ORG
GND
8-ball VFBGA
VCC
NC
ORG
GND
8
1
7
2
6
3
5
4
Bottom view
CS
SK
DI
DO
8
1 CS
7
2 SK
6
3 DI
5
4 DO
Bottom view
8735A–SEEPR–1/11
1.
Absolute Maximum Ratings*
Operating Temperature55C to +125C
*NOTICE:
Storage Temperature 65C to +150C
Voltage on Any Pin
with Respect to Ground  1.0V to +7.0V
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only, and functional
operation of the device at these or any other conditions
beyond those indicated in the operational sections of
this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may
affect device reliability.
Maximum Operating Voltage. . . . . . . . . . . . . . . . . . . . 6.25V
DC Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0mA
Figure 1-1.
Block Diagram
VCC
GND
MEMORY ARRAY
ORG
256/512 x 8
or
128/256 x 16
ADDRESS
DECODER
DATA
REGISTER
OUTPUT
BUFFER
DI
CS
SK
Note:
2
MODE
DECODE
LOGIC
CLOCK
GENERATOR
DO
When the ORG pin is connected to VCC, the x 16 organization is selected. When it is connected to ground, the x 8 organization
is selected. If the ORG pin is left unconnected and the application does not load the input beyond the capability of the internal
1M pull-up resistor, then the x 16 organization is selected.
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
Table 1-1.
Pin Capacitance(1)
Applicable over recommended operating range from TA = 25C, f = 1.0MHz, VCC = +5.0V (unless otherwise noted)
Symbol
Test Conditions
COUT
CIN
Notes:
Max
Units
Conditions
Output Capacitance (DO)
5
pF
VOUT = 0V
Input Capacitance (CS, SK, DI)
5
pF
VIN = 0V
1. This parameter is characterized, and is not 100% tested
Table 1-2.
DC Characteristics
Applicable over recommended operating range from TAI = -40°C to +85°C, VCC = +1.7V to +5.5V (unless otherwise noted)
Symbol
Parameter
VCC1
Supply Voltage
VCC2
Test Condition
Min
Typ
Max
Unit
1.7
5.5
V
Supply Voltage
2.5
5.5
V
VCC3
Supply Voltage
4.5
5.5
V
ICC
Supply Current
ISB1
Standby Current
ISB2
READ at 1.0MHz
0.5
2.0
mA
WRITE at 1.0MHz
0.5
2.0
mA
VCC = 1.7V
CS = 0V
0.4
1.0
µA
Standby Current
VCC = 2.5V
CS = 0V
6.0
10.0
µA
ISB3
Standby Current
VCC = 5.0V
CS = 0V
10.0
15.0
µA
IIL
Input Leakage
VIN = 0V to VCC
0.1
3.0
µA
Output Leakage
VIN = 0V to VCC
0.1
3.0
µA
VIL1
VIH1(1)
Input Low Voltage
Input High Voltage
2.5V VCC  5.5V
0.6
2.0
0.8
VCC + 1
V
VIL2(1)
VIH2(1)
Input Low Voltage
Input High Voltage
1.7V  VCC  2.5V
0.6
VCC x 0.7
VCC x 0.3
VCC + 1
V
VOL1
VOH1
Output Low Voltage
Output High Voltage
2.5V  VCC  5.5V
0.4
V
VOL2
VOH2
Output Low Voltage
Output High Voltage
1.7V  VCC  2.5V
IOL
(1)
Notes:
VCC = 5.0V
IOL = 2.1mA
IOH = 0.4mA
2.4
IOL = 0.15mA
IOH = 100µA
V
0.2
VCC  0.2
V
V
1. VIL min and VIH max are reference only, and are not tested
3
8735A–SEEPR–1/11
Table 1-3.
AC Characteristics
Applicable over recommended operating range from TAI = 40°C to + 85°C, VCC = as specified, CL = 1 TTL gate and 100pF
(unless otherwise noted)
Symbol
Parameter
Test Condition
fSK
SK Clock Frequency
4.5V  VCC  5.5V
2.5V  VCC  5.5V
1.7V  VCC  5.5V
0
0
0
tSKH
SK High Time
2.5V  VCC  5.5V
1.7V  VCC  5.5V
250
1000
ns
tSKL
SK Low Time
2.5V  VCC  5.5V
1.7V  VCC  5.5V
250
1000
ns
tCS
Minimum CS Low Time
2.5V  VCC  5.5V
1.7V  VCC  5.5V
250
1000
ns
tCSS
CS Setup Time
Relative to SK
2.5V  VCC  5.5V
1.7V  VCC  5.5V
50
200
ns
tDIS
DI Setup Time
Relative to SK
2.5V  VCC  5.5V
1.7V  VCC  5.5V
100
400
ns
tCSH
CS Hold Time
Relative to SK
0
ns
tDIH
DI Hold Time
Relative to SK
2.5V  VCC  5.5V
1.7V  VCC  5.5V
100
400
ns
tPD1
Output Delay to 1
AC Test
2.5V  VCC  5.5V
1.7V  VCC  5.5V
250
1000
ns
tPD0
Output Delay to 0
AC Test
2.5V  VCC  5.5V
1.7V  VCC  5.5V
250
1000
ns
tSV
CS to Status Valid
AC Test
2.5V  VCC  5.5V
1.7V  VCC  5.5V
250
1000
ns
tDF
CS to DO in
High Impedance
AC Test
CS = VIL
2.5V  VCC  5.5V
1.7V  VCC  5.5V
150
400
ns
tWP
Write Cycle Time
1.7V  VCC  5.5V
5
ms
Endurance(1)
5.0V, 25°C
Notes:
4
Min
1,000,000
Typ
Max
Units
2
1
0.25
MHz
Write
Cycles
1. This parameter is characterized, and is not 100% tested
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
Table 1-4.
Instruction Set for the Atmel AT93C56B and Atmel AT93C66B
Address
Data
Instruction
SB
Op
Code
READ
1
10
A8 – A0
A7 – A0
EWEN
1
00
11XXXXXXX
11XXXXXX
ERASE
1
11
A8 – A0
A7 – A0
WRITE
1
01
A8 – A0
A7 – A0
ERAL
1
00
10XXXXXXX
10XXXXXX
WRAL
1
00
01XXXXXXX
01XXXXXX
EWDS
1
00
00XXXXXXX
00XXXXXX
x8
x 16
x8
x 16
Comments
Reads data stored in memory at specified address
Write enable must precede all programming modes
Erases memory location An – A0
D7 – D0
D15 – D0
Writes memory location An – A0
Erases all memory locations. Valid only at
VCC = 4.5V to 5.5V
D7 – D0
D15 – D0
Note:
The Xs in the address field represent “don’t care” values, and must be clocked
2.
Functional Description
Writes all memory locations. Valid only at
VCC = 5.0V ±10% and disable register cleared
Disables all programming instructions
The Atmel® AT93C56B/66B is accessed via a simple and versatile three-wire serial communication interface. Device
operation is controlled by seven instructions issued by the host processor. A valid instruction starts with a rising edge of
CS, and consists of a start bit (logic one) followed by the appropriate op code and the desired memory address location.
READ (READ): The read (READ) instruction contains the address code for the memory location to be read. After the
instruction and address are decoded, data from the selected memory location is available at the serial output pin, DO.
Output data changes are synchronized with the rising edges ofthe serial clock, SK. It should be noted that a dummy bit
(logic zero) precedes the 8- or 16-bit data output string. The AT93C56B/66B supports sequential read operations. The
device will automatically increment the internal address pointer and clock out the next memory location as long as chip
select (CS) is held high. In this case, the dummy bit (logic zero) will not be clocked out between memory locations, thus
allowing for a continuous stream of data to be read.
ERASE/WRITE ENABLE (EWEN): To assure data integrity, the part automatically goes into the erase/write disable
(EWDS) state when power is first applied. An erase/write enable (EWEN) instruction must be executed first before any
programming instructions can be carried out. Please note that once in the EWEN state, programming remains enabled until
an EWDS instruction is executed or VCC power is removed from the part.
ERASE (ERASE): The erase (ERASE) instruction programs all bits in the specified memory location to the logical-one
state. The self-timed erase cycle starts once the ERASE instruction and address are decoded. The DO pin outputs the
ready/busy status of the part if CS is brought high after being kept low for a minimum of 250ns (tCS). A logic one at pin DO
indicates that the selected memory location has been erased and the part is ready for another instruction.
WRITE (WRITE): The Write (WRITE) instruction contains the 8- or 16-bits of data to be written into the specified memory
location. The self-timed programming cycle, tWP, starts after the last bit of data is received at serial data input pin DI. The DO
pin outputs the ready/busy status of the part if CS is brought high after being kept low for a minimum of 250ns (tCS). A
logic zero at DO indicates that programming is still in progress. A logic one indicates that the memory location at the
specified address has been written with the data pattern contained in the instruction and the part is ready for further
instructions. A ready/busy status cannot be obtained if CS is brought high after the end of the self-timed programming
cycle, tWP.
ERASE ALL (ERAL): The erase all (ERAL) instruction programs every bit in the memory array to the logic one state, and
is primarily used for testing purposes. The DO pin outputs the ready/busy status of the part if CS is brought high after being
kept low for a minimum of 250ns (tCS). The ERAL instruction is valid only at VCC = 5.0V 10%.
5
8735A–SEEPR–1/11
WRITE ALL (WRAL): The write all (WRAL) instruction programs all memory locations with the data patterns specified in
the instruction. The DO pin outputs the ready/busy status of the part if CS is brought high after being kept low for a
minimum of 250ns (tCS). The WRAL instruction is valid only at VCC = 5.0V ±10%.
ERASE/WRITE DISABLE (EWDS): To protect against accidental data disturbance, the erase/write disable (EWDS)
instruction disables all programming modes, and should be executed after all programming operations. The operation of the
READ instruction is independent of both the EWEN and EWDS instructions, and can be executed at any time.
3.
Timing Diagrams
Figure 3-1.
Note:
Synchronous Data Timing
1. This is the minimum SK period
Table 3-1.
Organization Key for Timing Diagrams
Atmel AT93C56B (2K)
Notes:
Atmel AT93C66B (4K)
I/O
x8
x 16
x8
x 16
AN
A8(1)
A7(2)
A8
A7
DN
D7
D15
D7
D15
1. A8 is a don’t-care value, but the extra clock is required
2. A7 is a don’t-care value, but the extra clock is required
6
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
Figure 3-2.
READ Timing
CS
CS
S
Figure 3-3.
EWEN Timing
CS
CS
S
1
Figure 3-4.
1
1
EWDS Timing
CS
CS
S
1
7
8735A–SEEPR–1/11
Figure 3-5.
WRITE Timing
CS
CS
S
1
1
A
A
PE A CE
S
REA
P
Figure 3-6.
WRAL Timing(1)
CS
CS
S
1
1
S
PE A CE
REA
P
Note:
8
1. Valid only at VCC = 4.5V to 5.5V
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
Figure 3-7.
ERASE Timing
CS
CS
SA
C EC
SA S
S
1
1
1
A
A
1
A
A
S
PE A CE
PE A CE
S
REA
P
Figure 3-8.
ERAL Timing(1)
CS
CS
SA
C EC
SA S
S
1
1
S
S
PE A CE
PE A CE
REA
P
Note:
1. Valid only at VCC = 4.5V to 5.5V
9
8735A–SEEPR–1/11
4.
Ordering Code Detail
A T 9 3 C 5 6 B - S S H M - B
Atmel Designator
Shipping Carrier Option
B or blank = Bulk (tubes)
T = Tape and reel
Product Family
Operating Voltage
M = 1.7V to 5.5V
Device Density
56 = 2k
66 = 4k
Device Revision
Package Device Grade or
Wafer/Die Thickness
H = Green, NiPdAu lead finish
Industrial Temperature range
(-40°C to +85°C)
U = Green, matte Sn lead finish
Industrial Temperature range
(-40°C to +85°C)
11 = 11mil wafer thickness
Package Option
SS
= JEDEC SOIC
X
= TSSOP
MA = UDFN
ME = XDFN
C
= VFBGA
WWU = Wafer unsawn
10
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
5.
Part Markings
5.1
Atmel AT93C56B
8 lead TSSOP
8 lead SOIC
3 Rows
2 of 6 and 1 of 7 Characters
3 Rows of 8 Characters
ATHYWW
56BM @
AAAAAAA
ATMLHYWW
56BM
@
AAAAAAAA
8 lead XDFN - 1.8x2.2mm
2 Rows of 3 Characters
8-ball VFBGA - 2.35x3.73mm 8 lead UDFN -2.0x3.0mm
2 Rows
1 of 4 and 1 of 5 Characters
3 Rows of 3 Characters
56B
HM@
YXX
56BU
@YMXX
PIN 1
PIN 1
PIN 1
Catalog Truncation: 56B
Catalog Number: AT93C56B
Date Codes
Y = Year
0: 2010
1: 2011
2: 2012
3: 2013
4:
5:
6:
7:
2014
2015
2016
2017
56B
YXX
M = Month
A: January
B: February
“
” “
L: December
WW
02:
04:
”
52:
= Work Week of Assembly
Week 2
Week 4
“ ”
Week 52
Trace Code
XX = Trace Code (ATMEL Lot Numbers to Correspond to Code)
(e.g. XX:
AA, AB...YZ, ZZ)
Q = MALAYSIA
2.7v min
2.5v min
1.8v min
1.7v min
1.5v min
Grade/Lead Finish Material
U:
H:
Lot Number
AAAAAAA = ATMEL Wafer Lot Number
Country of Assembly
@ = Country of Assembly
B = PHILIPPINES
W = THAILAND
Voltages
Blank:
D:
L:
M:
P:
H,Y = CHINA
Industrial/Matt Tin
Industrial/NiPdAu
ATMEL Truncation
AT: ATMEL
ATM: ATMEL
ATML: ATMEL
1/12/11
Package Mark Contact:
[email protected]
TITLE
93C56BSM, AT93C56B Standard Marking Information
for Package Offering
DRAWING NO.
93C56BSM
REV.
A
11
8735A–SEEPR–1/11
5.2
Atmel AT93C66B
8 lead SOIC
8 lead TSSOP
3 Rows
2 of 6 and 1 of 7 Characters
3 Rows of 8 Characters
ATHYWW
66BM @
AAAAAAA
ATMLHYWW
66BM
@
AAAAAAAA
8 lead XDFN - 1.8x2.2mm
2 Rows of 3 Characters
8-ball VFBGA - 2.35x3.73mm 8 lead UDFN - 2.0x3.0mm
3 Rows of 3 Characters
2 Rows
1 of 4 and 1 of 5 Characters
PIN 1
66B
HM@
YXX
66BU
@YMXX
PIN 1
PIN 1
Catalog Truncation: 66B
Catalog Number: AT93C66B
Date Codes
Y = Year
0: 2010
1: 2011
2: 2012
3: 2013
4:
5:
6:
7:
2014
2015
2016
2017
66B
YXX
M = Month
A: January
B: February
“
” “
L: December
WW
02:
04:
”
52:
= Work Week of Assembly
Week 2
Week 4
“ ”
Week 52
Trace Code
XX = Trace Code (ATMEL Lot Numbers to Correspond to Code)
(e.g. XX:
AA, AB...YZ, ZZ)
Q = MALAYSIA
2.7v min
2.5v min
1.8v min
1.7v min
1.5v min
Grade/Lead Finish Material
U:
H:
Lot Number
AAAAAAA = ATMEL Wafer Lot Number
Country of Assembly
@ = Country of Assembly
B = PHILIPPINES
W = THAILAND
Voltages
Blank:
D:
L:
M:
P:
H,Y = CHINA
Industrial/Matt Tin
Industrial/NiPdAu
ATMEL Truncation
AT: ATMEL
ATM: ATMEL
ATML: ATMEL
1/12/11
Package Mark Contact:
[email protected]
12
TITLE
93C66BSM, AT93C66B Standard Marking Information
for Package Offering
DRAWING NO.
93C66BSM
REV.
A
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
5.3
Atmel AT93C56B Ordering Information
Atmel Ordering Code
Voltage
Package
Operation Range
AT93C56B-SSHM-B (NiPdAu Lead Finish)
AT93C56B-SSHM-T(2) (NiPdAu Lead Finish)
AT93C56B-XHM-B(1) (NiPdAu Lead Finish)
AT93C56B-XHM-T(2) (NiPdAu Lead Finish)
AT93C56B-MAHM-T(2) (NiPdAu Lead Finish)
AT93C56B-MEHM-T(2) (NiPdAu Lead Finish)
AT93C56B-CUM-T(2) (NiPdAu Lead Finish)
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
8S1
8S1
8A2
8A2
8Y6
8ME1
8U3-1
Lead-free/Halogen-free/
Industrial Temperature
(40C to 85C)
AT93C56B-WWU11M
1.7 to 5.5
Die Sale
Industrial Temperature
(40C to 85C)
(1)
Notes:
1. "-B" denotes bulk delivery
2. "-T" denotes tape and reel delivery. SOIC = 4k/reel. TSSOP UDFN, XDFN, and VFBGA = 5k/reel
3. For wafer sales, please contact Atmel sales
Package Type
8S1
8-lead, 0.150" Wide, Plastic Gull Wing, Small OutlinePackage (JEDEC SOIC)
8A2
8-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP)
8Y6
8-lead, 2.00 mm x 3.00 mm Body, 0.50 mm Pitch, Ultra Thin Dual No Lead Package (UDFN)
8ME1
8-lead, 1.80mm x 2.20mm Body (XDFN)
8U3-1
8-ball, 1.50mm x 2.00mm Body, 0.50mm Pitch, Small Die Ball Grid Array (VFBGA)
13
8735A–SEEPR–1/11
5.4
Atmel AT93C66B Ordering Information
Atmel Ordering Code
Voltage
Package
Operation Range
AT93C66B-SSHM-B (NiPdAu Lead Finish)
AT93C66B-SSHM-T(2) (NiPdAu Lead Finish)
AT93C66B-XHM-B(1) (NiPdAu Lead Finish)
AT93C66B-XHM-T(2) (NiPdAu Lead Finish)
AT93C66B-MAHM-T(2) (NiPdAu Lead Finish)
AT93C66B-MEHM-T(2) (NiPdAu Lead Finish)
AT93C66B-CUM-T(2) (NiPdAu Lead Finish)
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
1.7 to 5.5
8S1
8S1
8A2
8A2
8Y6
8ME1
8U3-1
Lead-free/Halogen-free/
Industrial Temperature
(40C to 85C)
AT93C56B-WWU11M
1.7 to 5.5
Die Sale
Industrial Temperature
(40C to 85C)
(1)
Notes:
1. "-B" denotes bulk delivery
2. "-T" denotes tape and reel delivery. SOIC = 4k/reel. TSSOP UDFN, XDFN, and VFBGA = 5k/reel
3. For wafer sales, please contact Atmel sales
Package Type
8S1
8-lead, 0.150" Wide, Plastic Gull Wing, Small Outline Package (JEDEC SOIC)
8A2
8-lead, 0.170" Wide, Thin Shrink Small Outline Package (TSSOP)
8Y6
8-lead, 2.00 mm x 3.00 mm Body, 0.50 mm Pitch, Ultra Thin Dual No Lead Package (UDFN)
8ME1
8-lead, 1.80mm x 2.20mm Body (XDFN)
8U3-1
8-ball, 1.50mm x 2.00mm Body, 0.50mm Pitch, Small Die Ball Grid Array (VFBGA)
14
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
6.
Packaging Information
8S1 – JEDEC SOIC
C
1
E
E1
L
N
Ø
TOP VIEW
END VIEW
e
b
A
COMMON DIMENSIONS
(Unit of Measure = mm)
A1
D
SIDE VIEW
SYMBOL
MIN
A
1.35
–
1.75
A1
0.10
–
0.25
b
0.31
–
0.51
C
0.17
–
0.25
D
4.80
–
5.05
E1
3.81
–
3.99
E
5.79
–
6.20
e
Notes:
This drawing is for general information only.
Refer to JEDEC Drawing MS-012, Variation AA
for proper dimensions, tolerances, datums, etc.
MAX
NOM
NOTE
1.27 BSC
L
0.40
–
1.27
Ø
0°
–
8°
5/19/10
TITLE
Package Drawing Contact:
[email protected]
8S1, 8-lead (0.150” Wide Body), Plastic Gull
Wing Small Outline (JEDEC SOIC)
GPC
SWB
DRAWING NO.
8S1
REV.
F
15
8735A–SEEPR–1/11
8A2 – TSSOP
3
2 1
Pin 1 indicator
this corner
E1
E
L1
N
L
Top View
End View
COMMON DIMENSIONS
(Unit of Measure = mm)
MIN
NOM
MAX
NOTE
D
2.90
3.00
3.10
2, 5
E
6.40 BSC
E1
4.30
4.40
4.50
3, 5
A
–
–
1.20
A2
0.80
1.00
1.05
b
0.19
–
0.30
SYMBOL
A
b
e
A2
D
e
L
Side View
Notes:
L1
0.65 BSC
0.45
0.60
0.75
1.00 REF
1. This drawing is for general information only. Refer to JEDEC Drawing MO-153, Variation AA, for proper dimensions,
tolerances, datums, etc.
2. Dimension D does not include mold Flash, protrusions or gate burrs. Mold Flash, protrusions and gate burrs shall
not exceed 0.15mm (0.006in) per side.
3. Dimension E1 does not include inter-lead Flash or protrusions. Inter-lead Flash and protrusions shall not exceed
0.25mm (0.010in) per side.
4. Dimension b does not include Dambar protrusion. Allowable Dambar protrusion shall be 0.08mm total in excess
of the b dimension at maximum material condition. Dambar cannot be located on the lower radius of the foot.
Minimum space between protrusion and adjacent lead is 0.07mm.
5. Dimension D and E1 to be determined at Datum Plane H.
TITLE
Package Drawing Contact:
[email protected]
16
4
8A2, 8-lead 4.4mm Body, Plastic Thin
Shrink Small Outline Package (TSSOP)
GPC
TNR
DRAWING NO.
8A2
5/19/10
REV.
E
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
8Y6 – UDFN
D2
A
b
(8X)
E
E2
Pin 1
Index
Area
Pin 1 ID
L (8X)
D
A2
e (6X)
A1
1.50 REF.
A3
COMMON DIMENSIONS
(Unit of Measure = mm)
SYMBOL
MIN
D
1. This drawing is for general information only. Refer to JEDEC
Drawing MO-229, for proper dimensions, tolerances,
datums, etc.
2. Dimension b applies to metallized terminal and is measured
between 0.15mm and 0.30mm from the terminal tip. If the
terminal has the optional radius on the other end of the
terminal, the dimension should not be measured in that
radius area.
3. Soldering the large thermal pad is optional, but not
recommended. No electrical connection is accomplished to
the device through this pad, so if soldered it should be tied
to ground
MAX
3.00 BSC
D2
1.40
1.50
1.60
E2
–
–
1.40
A
–
–
0.60
A1
0.00
0.02
0.05
A2
–
–
0.55
A3
L
0.20 REF
0.20
e
b
NOTE
2.00 BSC
E
Notes:
NOM
0.40
0.30
0.50 BSC
0.20
0.25
0.30
2
11/21/08
TITLE
Package Drawing Contact:
[email protected]
8Y6, 8-lead, 2.0x3.0mm Body, 0.50mm Pitch,
UltraThin Mini-MAP, Dual No Lead Package
(Sawn)(UDFN)
GPC
YNZ
DRAWING NO.
8Y6
REV.
E
17
8735A–SEEPR–1/11
8ME1 – XDFN
e1
D
8
7
6
b
5
L
E
PIN #1 ID
0.10
PIN #1 ID
0.15
1
2
3
4
A1
b
e
A
Top View
Side View
Bottom View
COMMON DIMENSIONS
(Unit of Measure = mm)
SYMBOL
MIN
NOM
MAX
A
–
–
0.40
A1
0.00
–
0.05
D
1.70
1.80
1.90
E
2.10
2.20
2.30
b
0.15
0.20
0.25
e
0.40 TYP
e1
1.20 REF
L
0.26
0.30
NOTE
0.35
8/3/09
TITLE
Package Drawing Contact:
[email protected]
18
8ME1, 8-lead (1.80 x 2.20mm Body)
Extra Thin DFN (XDFN)
GPC
DTP
DRAWING NO.
8ME1
REV.
A
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel AT93C56B/66B
8U3-1 – VFBGA
E
D
5.
PIN 1 BALL PAD CORNER
b
A1
A2
TOP VIEW
A
SIDE VIEW
PIN 1 BALL PAD CORNER
1
2
4
3
d
(d1)
8
6
7
5
COMMON DIMENSIONS
(Unit of Measure - mm)
e
(e1)
BOTTOM VIEW
8 SOLDER BALLS
Notes:
SYMBOL
MIN
NOM
MAX
A
0.73
0.79
0.85
A1
0.09
0.14
0.19
A2
0.40
0.45
0.50
b
0.20
0.25
0.30
1. This drawing is for general information only.
D
1.50 BSC
2. Dimension ‘b’ is measured at maximum solder ball diameter.
E
2.0 BSC
3. Solder ball composition shall be 95.5Sn-4.0Ag-.5Cu.
e
0.50 BSC
e1
0.25 REF
d
1.00 BSC
d1
0.25 REF
NOTE
2
07/14/10
TITLE
Package Drawing Contact:
[email protected]
8U3-1, 8-ball, 1.50 x 2.00 mm Body,
0.50 pitch, VFBGA Package (dBGA2)
GPC
GXU
DRAWING NO.
8U3-1
REV.
D
19
8735A–SEEPR–1/11
7.
20
Revision History
Revision No.
Date
Comments
8735A
01/2011
Initial document release
Atmel AT93C56B/66B
8735A–SEEPR–1/11
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: (+1) (408) 441-0311
Fax: (+1) (408) 487-2600
www.atmel.com
Atmel Asia Limited
Unit 01-5 & 16, 19F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
HONG KONG
Tel: (+852) 2245-6100
Fax: (+852) 2722-1369
Atmel Munich GmbH
Business Campus
Parkring 4
D-85748 Garching b. Munich
GERMANY
Tel: (+49) 89-31970-0
Fax: (+49) 89-3194621
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
JAPAN
Tel: (+81) (3) 3523-3551
Fax: (+81) (3) 3523-7581
© 2011 Atmel Corporation. All rights reserved. / Rev.: 8735A–SEEPR–1/11
Atmel®, Atmel logo and combinations thereof, and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be
trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel
products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY
RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE
THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to
make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not
be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Similar pages