AVAGO ATF-34143-BLKG Low noise pseudomorphic hemt in a surface mount plastic package Datasheet

ATF-34143
Low Noise Pseudomorphic HEMT
in a Surface Mount Plastic Package
Data Sheet
Description
Features
Avago’s ATF-34143 is a high dynamic range, low noise
PHEMT housed in a 4-lead SC-70 (SOT-343) surface mount
plastic package.
 Lead-free Option Available
Based on its featured performance, ATF-34143 is ideal for
the first stage of base station LNA due to the excellent
combination of low noise figure and high linearity[1]. The
device is also suitable for applications in Wireless LAN,
WLL/RLL, MMDS, and other systems requiring super low
noise figure with good intercept in the 450 MHz to 10 GHz
frequency range.
 800 micron Gate Width
Note:
1.9 GHz; 4V, 60 mA (Typ.)
1. From the same PHEMT FET family, the larger geometry ATF-33143
may also be considered either for the higher linearity performance
or easier circuit design for stability in the lower frequency bands
(800– 900 MHz).
Surface Mount Package - SOT-343
 Low Noise Figure
 Excellent Uniformity in Product Specifications
 Low Cost Surface Mount Small Plastic Package
SOT-343 (4 lead SC-70)
 Tape-and-Reel Packaging Option Available
Specifications
 0.5 dB Noise Figure
 17.5 dB Associated Gain
 20 dBm Output Power at 1 dB Gain Compression
 31.5 dBm Output 3rd Order Intercept
Applications
 Tower Mounted Amplifier and Low Noise Amplifier
for GSM/TDMA/CDMA Base Stations
 LNA for Wireless LAN, WLL/RLL and MMDS
Applications
Pin Connections and Package Marking
DRAIN
4Px
SOURCE
SOURCE
GATE
Note: Top View. Package marking provides
orientation and identification.
“4P” = Device code
“x” = Date code character. A new character
is assigned for each month, year.
 General Purpose Discrete PHEMT for other Ultra Low
Noise Applications
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model (Class A)
ESD Human Body Model (Class 0)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.
ATF-34143 Absolute Maximum Ratings[1]
Symbol
Parameter
Units
Absolute
Maximum
VDS
Drain - Source Voltage[2]
V
5.5
VGS
Gate - Source Voltage[2]
V
-5
VGD
Gate Drain Voltage[2]
V
-5
ID
Current[2]
mA
Idss [3]
Total Power Dissipation [4]
mW
725
RF Input Power
dBm
17
°C
160
Drain
Pdiss
Pin max
TCH
Channel Temperature
TSTG
Storage Temperature
°C
-65 to 160
jc
Thermal Resistance [5]
°C/W
165
Notes:
1. Operation of this device above any one of
these parameters may cause permanent
damage.
2. Assumes DC quiescent conditions.
3. VGS = 0 volts.
4. Source lead temperature is 25°C. Derate
6 mW/°C for TL > 40°C.
5. Thermal resistance measured using 150°C
Liquid Crystal Measurement method.
6. Under large signal conditions, VGS may
swing positive and the drain current may
exceed Idss. These conditions are acceptable
as long as the maximum Pdiss and Pin max
ratings are not exceeded.
Product Consistency Distribution Charts [7]
120
250
+0.6 V
Cpk = 1.37245
Std = 0.66
9 Wafers
Sample Size = 450
100
200
80
IDS (mA)
150
-3 Std
0V
+3 Std
60
100
40
50
20
–0.6 V
0
0
0
2
4
VDS (V)
6
29
8
30
31
32
33
34
35
OIP3 (dBm)
Figure 2. OIP3 @ 2 GHz, 4†V, 60 mA.
LSL=29.0, Nominal=31.8, USL=35.0
Figure 1. Typical/Pulsed I-V Curves[6].
(VGS = -0.2 V per step)
120
Cpk = 2.69167
Std = 0.04
9 Wafers
Sample Size = 450
100
120
Cpk = 2.99973
Std = 0.15
9 Wafers
Sample Size = 450
100
80
80
-3 Std
-3 Std
+3 Std
60
60
40
40
20
20
+3 Std
0
0
0
0.2
0.4
NF (dB)
Figure 3. NF @ 2 GHz, 4†V, 60 mA.
LSL=0.1, Nominal=0.47, USL=0.8
0.6
0.8
16
16.5
17
17.5
18
18.5
19
GAIN (dB)
Figure 4. Gain @ 2 GHz, 4†V, 60 mA.
LSL=16.0, Nominal=17.5, USL=19.0
Notes:
7. Distribution data sample size is 450 samples taken from 9 different wafers. Future wafers allocated to this product may have nominal values
anywhere within the upper and lower spec limits.
8. Measurements made on production test board. This circuit represents a trade-off between an optimal noise match and a realizeable match based
on production test requirements. Circuit losses have been de-embedded from actual measurements.
2
ATF-34143 Electrical Specifications
TA = 25°C, RF parameters measured in a test circuit for a typical device
Symbol
Parameters and Test Conditions
[1]
Saturated Drain Current
[1]
Pinchoff Voltage
Idss
VP
Id
[1]
Max.
mA
90
118
145
V
-0.65
-0.5
-0.35
VGS = -0.34 V, VDS = 4 V
mA
—
60
—
VDS = 1.5 V, gm = Idss /VP
mmho
180
230
—
Quiescent Bias Current
IGDO
Gate to Drain Leakage Current
Igss
Gate Leakage Current
NF
Noise Figure
P1dB
Typ.[2]
VDS = 1.5 V, IDS = 10% of Idss
Transconductance
OIP3
Min.
VDS = 1.5 V, VGS = 0 V
gm
Ga
Units
VGD = 5 V
μA
VGD = VGS = -4 V
μA
f = 2 GHz
VDS = 4 V, IDS = 60 mA
VDS = 4 V, IDS = 30 mA
f = 900 MHz
30
300
dB
0.5
0.5
0.8
VDS = 4 V, IDS = 60 mA
dB
0.4
f = 2 GHz
VDS = 4 V, IDS = 60 mA
VDS = 4 V, IDS = 30 mA
dB
f = 900 MHz
VDS = 4 V, IDS = 60 mA
dB
f = 2 GHz
+5 dBm Pout /Tone
VDS = 4 V, IDS = 60 mA
VDS = 4 V, IDS = 30 mA
dBm
f = 900 MHz
+5 dBm Pout /Tone
VDS = 4 V, IDS = 60 mA
dBm
31
f = 2 GHz
VDS = 4 V, IDS = 60 mA
VDS = 4 V, IDS = 30 mA
dBm
20
19
f = 900 MHz
VDS = 4 V, IDS = 60 mA
dBm
18.5
Associated Gain
3rd
Order
Output
Intercept Point [3]
500
1 dB Compressed
Intercept Point [3]
—
16
17.5
17
19
21.5
29
31.5
30
Notes:
1. Guaranteed at wafer probe level
2. Typical value determined from a sample size of 450 parts from 9 wafers.
3. Using production test board.
Input
50 Ohm
Transmission
Line Including
Gate Bias T
(0.5 dB loss)
Input
Matching Circuit
Γ_mag = 0.30
Γ_ang = 56°
(0.4 dB loss)
DUT
50 Ohm
Transmission
Line Including
Drain Bias T
(0.5 dB loss)
Output
Figure 5. Block diagram of 2 GHz production test board used for Noise Figure, Associated Gain, P1dB, and OIP3 measurements. This circuit represents a trade-off
between an optimal noise match and associated impedance matching circuit losses. Circuit losses have been de-embedded from actual measurements.
3
ATF-34143 Typical Performance Curves
35
1
20
OIP3
30
20
15
P1dB
10
10
5
3V
4V
5
0
0.8
15
NOISE FIGURE (dB)
ASSOCIATED GAIN (dB)
OIP3, P1dB (dBm)
25
0
20
40
60
80
100
120
0
0
20
40
IDSQ (mA)
0
120
P1dB
10
40
60
80
100
15
10
3V
4V
0
20
100
120
0.5
0.4
0.3
40
60
80
100
3V
4V
0.1
120
CURRENT (mA)
IDSQ (mA)
Figure 9. OIP3 and P1dB vs. IDS and VDS Tuned for NF @
4 V, 60 mA at 900 MHz. [1,2]
80
0.2
0
120
60
0.6
5
3V
4V
5
20
40
0.7
NOISE FIGURE (dB)
ASSOCIATED GAIN (dB)
20
0
20
Figure 8. Noise Figure vs. Current (Id) and Voltage
(VDS) at 2 GHz. [1,2]
20
15
0
CURRENT (mA)
25
OIP3
25
OIP3, P1dB (dBm)
100
Figure 7. Associated Gain vs. Current (Id) and Voltage
(VD) at 2 GHz. [1,2]
30
0
80
3V
4V
CURRENT (mA)
Figure 6. OIP3 and P1dB vs. IDS and VDS Tuned for NF @
4 V, 60 mA at 2 GHz. [1,2]
35
60
0.4
0.2
3V
4V
140
0.6
0
0
20
40
60
80
100
120
CURRENT (mA)
Figure 10. Associated Gain vs. Current (Id) and Voltage
(VD) at 900 MHz. [1,2]
Figure 11. Noise Figure vs. Current (Id) and Voltage
(VDS) at 900 MHz. [1,2]
25
1.2
1.0
20
Ga (dB)
Fmin (dB)
0.8
0.6
15
0.4
0
10
60 mA
40 mA
20 mA
0.2
0
2.0
4.0
6.0
FREQUENCY (GHz)
Figure 12. Fmin vs. Frequency and Current at 4 V.
Notes:
5
60 mA
40 mA
20 mA
0
1.0
2.0
3.0
4.0
5.0
6.0
FREQUENCY (GHz)
Figure 13. Associated Gain vs. Frequency and Current
at 4 V.
1. Measurements made on a fixed toned production test board that was tuned for optimal gain match with reasonable noise figure at 4V, 60 mA
bias. This circuit represents a trade-off between optimal noise match, maximum gain match, and a realizable match based on production test
board requirements. Circuit losses have been de-embedded from actual measurements.
2. P1dB measurements are performed with passive biasing. Quicescent drain current, IDSQ, is set with zero RF drive applied. As P1dB is approached,
the drain current may increase or decrease depending on frequency and dc bias point. At lower values of IDSQ the device is running closer to class
B as power output approaches P1dB. This results in higher PAE (power added efficiency) when compared to a device that is driven by a constant
current source as is typically done with active biasing. As an example, at a VDS = 4 V and IDSQ = 10 mA, Id increases to 62 mA as a P1dB of +19 dBm
is approached.
4
ATF-34143 Typical Performance Curves, continued
33
35
31
30
1.0
Ga (dB)
NF (dB)
20
15
0.5
P1dB, OIP3 (dBm)
29
OIP3
27
85 C
25 C
-40 C
25
23
P1dB
21
10
0
2000
4000
0
8000
6000
2.0
1.5
10
8000
1.0
0.5
0
20
40
60
80
100
120
140
0
Figure 16. NF, Gain, OP1dB and OIP3 vs. IDS at 4 V and
3.9 GHz Tuned for Noise Figure. [1]
5.0
27
4.5
24
4.0
21
3.5
Gain
OP1dB
OIP3
NF
18
15
12
3.0
2.5
2.0
9
1.5
6
1.0
3
0.5
0
20
40
60
80
100
120
IDSQ (mA)
Figure 17. NF, Gain, OP1dB and OIP3 vs. IDS at 4 V and
5.8 GHz Tuned for Noise Figure. [1]
0
25
25
20
20
15
15
P1dB (dBm)
30
P1dB (dBm)
IDSQ (mA)
Figure 15. P1dB, IP3 vs. Frequency and Temperature at VDS
= 4 V, IDS = 60 mA. [1]
NOISE FIGURE (dB)
FREQUENCY (MHz)
Figure 14. Fmin and Ga vs. Frequency and Temperature
at VDS = 4 V, IDS = 60 mA.
GAIN (dB), OP1dB, and OIP3 (dBm)
FREQUENCY (GHz)
0
10
5
5
3V
4V
0
-5
10
0
50
100
3V
4V
0
150
-5
0
50
100
150
IDS (mA)
IDS (mA)
Figure 18. P1dB vs. IDS Active Bias Tuned for NF @ 4V, 60
mA at 2 GHz.
Figure 19. P1dB vs. IDS Active Bias Tuned for min NF @
4V, 60 mA at 900 MHz.
Note:
1. P1dB measurements are performed with passive biasing. Quicescent drain current, IDSQ, is set with zero RF drive applied. As P1dB is approached,
the drain current may increase or decrease depending on frequency and dc bias point. At lower values of IDSQ the device is running closer to class
B as power output approaches P1dB. This results in higher PAE (power added efficiency) when compared to a device that is driven by a constant
current source as is typically done with active biasing. As an example, at a VDS = 4 V and IDSQ = 10 mA, Id increases to 62 mA as a P1dB of +19 dBm
is approached.
5
3.0
2.5
0
6000
3.5
15
17
4000
4.0
20
5
2000
4.5
Gain
OP1dB
OIP3
NF
25
19
0
5.0
NOISE FIGURE (dB)
1.5
85 C
25 C
-40 C
GAIN (dB), OP1dB, and OIP3 (dBm)
25
ATF-34143 Power Parameters tuned for Power, VDS = 4 V, IDSQ = 120 mA
Freq
(GHz)
P1dB
(dBm)
Id
(mA)
G1dB
(dB)
PAE1dB
(%)
P3dBm
(dBm)
Id
(mA)
PAE3dB
(%)
Gamma
Out_mag
(Mag)
Gamma
Out_ang
(Degrees)
0.9
20.9
114
25.7
27
22.8
108
44
0.34
136
1.5
21.7
115
21.9
32
23.1
95
53
0.31
152
1.8
21.3
111
20.5
30
23.0
105
47
0.30
164
2
22.0
106
19.5
37
23.7
115
50
0.28
171
4
22.7
110
12.7
40
23.6
111
47
0.26
-135
6
23.3
115
9.2
41
24.2
121
44
0.24
-66
ATF-34143 Power Parameters tuned for Power, VDS = 4 V, IDSQ = 60 mA
Freq
(GHz)
P1dB
(dBm)
Id
(mA)
G1dB
(dB)
PAE1dB
(%)
P3dBm
(dBm)
Id
(mA)
PAE3dB
(%)
Gamma
Out_mag
(Mag)
Gamma
Out_ang
(Degrees)
0.9
18.2
75
27.5
22
20.5
78
36
0.48
102
1.5
18.7
58
24.5
32
20.8
59
51
0.45
117
1.8
18.8
57
23.0
33
21.1
71
45
0.42
126
2
18.8
59
22.2
32
21.9
81
47
0.40
131
4
20.2
66
13.9
38
22.0
77
48
0.25
-162
6
21.2
79
9.9
37
23.5
102
46
0.18
-77
80
80
50
60
Pout (dBm), G (dB),
PAE (%)
Pout (dBm), G (dB),
PAE (%)
40
30
20
40
20
10
-10
-30
-20
-10
0
Pin (dBm)
Figure 20. Swept Power Tuned for Power
at 2 GHz, VDS = 4 V, IDSQ = 120 mA.
10
Pout
Gain
PAE
0
Pout
Gain
PAE
0
20
-20
-30
-20
-10
0
10
20
Pin (dBm)
Figure 21. Swept Power Tuned for Power at 2 GHz,
VDS = 4 V, IDSQ = 60 mA.
Notes:
1. P1dB measurements are performed with passive biasing. Quicescent drain current, IDSQ, is set with zero RF drive applied. As P1dB is approached,
the drain current may increase or decrease depending on frequency and dc bias point. At lower values of IDSQ the device is running closer to class
B as power output approaches P1dB. This results in higher PAE (power added efficiency) when compared to a device that is driven by a constant
current source as is typically done with active biasing. As an example, at a VDS = 4 V and IDSQ = 10 mA, Id increases to 62 mA as a P1dB of +19 dBm
is approached.
2. PAE(%) = ((Pout – Pin)/Pdc) x 100
3. Gamma out is the reflection coefficient of the matching circuit presented to the output of the device.
6
ATF-34143 Typical Scattering Parameters, VDS = 3 V, IDS = 20 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
dB
S12
Mag.
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.5
0.8
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
0.96
0.91
0.87
0.81
0.78
0.75
0.72
0.69
0.65
0.64
0.65
0.66
0.69
0.72
0.75
0.77
0.80
0.83
0.85
0.86
0.85
0.85
0.88
-37
-60
-76
-104
-115
-126
-145
-162
166
139
114
89
67
48
30
10
-10
-29
-44
-55
-72
-88
-101
20.07
19.68
18.96
17.43
16.70
16.00
14.71
13.56
11.61
10.01
8.65
7.33
6.09
4.90
3.91
2.88
1.74
0.38
-0.96
-2.06
-3.09
-4.22
-5.71
10.079
9.642
8.867
7.443
6.843
6.306
5.438
4.762
3.806
3.165
2.706
2.326
2.017
1.758
1.568
1.393
1.222
1.045
0.895
0.789
0.701
0.615
0.518
153
137
126
106
98
90
75
62
38
16
-5
-27
-47
-66
-86
-105
-126
-145
-161
-177
166
149
133
-29.12
-26.02
-24.29
-22.27
-21.62
-21.11
-20.45
-19.83
-19.09
-18.49
-18.06
-17.79
-17.52
-17.39
-17.08
-16.95
-16.95
-17.39
-17.86
-18.13
-18.13
-18.06
-18.94
0.035
0.050
0.061
0.077
0.083
0.088
0.095
0.102
0.111
0.119
0.125
0.129
0.133
0.135
0.140
0.142
0.142
0.135
0.128
0.124
0.124
0.125
0.113
68
56
48
34
28
23
15
7
-8
-21
-35
-49
-62
-75
-88
-103
-118
-133
-145
-156
-168
177
165
0.40
0.34
0.32
0.29
0.28
0.26
0.25
0.23
0.22
0.22
0.23
0.25
0.29
0.34
0.39
0.43
0.47
0.53
0.58
0.62
0.65
0.68
0.71
-35
-56
-71
-98
-110
-120
-140
-156
174
146
118
91
67
46
28
10
-10
-28
-42
-57
-70
-85
-103
24.59
22.85
21.62
19.85
19.16
18.55
17.58
16.69
15.35
14.25
13.35
10.91
9.71
8.79
8.31
7.56
6.83
6.18
5.62
5.04
3.86
3.00
2.52
ATF-34143 Typical Noise Parameters
VDS = 3 V, IDS = 20 mA
Fmin
dB
Mag.
0.5
0.9
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.10
0.11
0.11
0.14
0.17
0.19
0.23
0.29
0.42
0.54
0.67
0.79
0.92
1.04
1.16
0.90
0.85
0.84
0.77
0.74
0.71
0.65
0.59
0.51
0.45
0.42
0.42
0.45
0.51
0.61
Ang.
Rn/50
-
Ga
dB
13
27
31
48
57
66
83
102
138
174
-151
-118
-88
-63
-43
0.16
0.14
0.13
0.11
0.10
0.09
0.07
0.06
0.03
0.03
0.05
0.10
0.18
0.30
0.46
21.8
18.3
17.8
16.4
16.0
15.6
14.8
14.0
12.6
11.4
10.3
9.4
8.6
8.0
7.5
25
20
MSG
15
MSG/MAG and
S21 (dB)
opt
Freq.
GHz
10
MAG
S21
5
0
-5
-10
0
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
Figure 23. MSG/MAG and |S21|2 vs. Frequency
at 3 V, 20 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based
on a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the
gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via
holes are placed within 0.010 inch from each source lead contact point, one via on each side of that point.
7
ATF-34143 Typical Scattering Parameters, VDS = 3 V, IDS = 40 mA
Freq.
GHz
Mag.
S11
Ang.
dB
S21
Mag.
Ang.
dB
S12
Mag.
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
0.5
0.8
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
0.96
0.89
0.85
0.79
0.76
0.74
0.70
0.67
0.64
0.64
0.65
0.66
0.69
0.73
0.76
0.78
0.80
0.83
0.86
0.87
0.86
0.86
0.88
-40
-64
-81
-109
-121
-131
-150
-167
162
135
111
87
65
46
28
9
-11
-30
-44
-56
-72
-88
-102
21.32
20.79
19.96
18.29
17.50
16.75
15.39
14.19
12.18
10.54
9.15
7.80
6.55
5.33
4.33
3.30
2.15
0.79
-0.53
-1.61
-2.60
-3.72
-5.15
11.645
10.950
9.956
8.209
7.495
6.876
5.880
5.120
4.063
3.365
2.867
2.454
2.125
1.848
1.647
1.462
1.281
1.095
0.941
0.831
0.741
0.652
0.553
151
135
124
104
96
88
74
61
38
16
-5
-26
-46
-65
-84
-104
-123
-142
-158
-174
169
153
137
-30.46
-27.33
-25.68
-23.61
-22.97
-22.38
-21.51
-20.92
-19.83
-19.02
-18.34
-17.86
-17.46
-17.20
-16.83
-16.65
-16.65
-17.08
-17.52
-17.72
-17.72
-17.79
-18.64
0.030
0.043
0.052
0.066
0.071
0.076
0.084
0.090
0.102
0.112
0.121
0.128
0.134
0.138
0.144
0.147
0.147
0.140
0.133
0.130
0.130
0.129
0.117
68
56
49
36
32
27
19
12
-1
-14
-28
-42
-55
-69
-84
-99
-114
-130
-142
-154
-166
179
166
0.29
0.24
0.24
0.23
0.23
0.22
0.22
0.22
0.21
0.22
0.24
0.28
0.32
0.37
0.41
0.45
0.50
0.55
0.60
0.64
0.66
0.69
0.72
-43
-70
-88
-118
-130
-141
-160
-176
157
131
105
81
60
40
23
5
-14
-31
-45
-59
-73
-88
-105
25.89
24.06
22.82
20.95
20.24
19.57
18.45
17.55
16.00
14.78
12.91
11.03
9.93
9.07
8.59
7.84
7.15
6.50
5.96
5.39
4.21
3.43
2.95
ATF-34143 Typical Noise Parameters
0.5
0.9
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.10
0.13
0.14
0.17
0.21
0.23
0.29
0.35
0.47
0.6
0.72
0.85
0.97
1.09
1.22
opt
Mag.
Ang.
Rn/50
-
Ga
dB
0.87
0.82
0.80
0.73
0.70
0.66
0.60
0.54
0.46
0.41
0.39
0.41
0.45
0.52
0.61
13
28
32
50
61
68
87
106
144
-178
-142
-109
-80
-56
-39
0.16
0.13
0.13
0.1
0.09
0.08
0.06
0.05
0.03
0.03
0.06
0.12
0.21
0.34
0.50
23.0
19.6
19.2
17.7
17.1
16.7
15.8
14.9
13.4
12.1
10.9
9.9
9.1
8.4
8.0
30
25
20
MSG/MAG and
S21 (dB)
VDS = 3 V, IDS = 40 mA
Freq.
Fmin
GHz
dB
MSG
15
10
MAG
S21
5
0
-5
-10
0
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
Figure 24. MSG/MAG and |S21|2 vs. Frequency
at 3 V, 40 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based
on a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the
gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via
holes are placed within 0.010 inch from each source lead contact point, one via on each side of that point.
8
ATF-34143 Typical Scattering Parameters, VDS = 4 V, IDS = 40 mA
Freq.
GHz
Mag.
S11
Ang.
0.5
0.8
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
0.95
0.89
0.85
0.78
0.73
0.70
0.67
0.64
0.63
0.64
0.66
0.69
0.72
0.76
0.78
0.80
0.84
0.86
0.87
0.86
0.86
0.89
0.89
-40
-65
-82
-109
-131
-150
-167
162
135
111
87
65
47
28
9
-11
-29
-44
-56
-72
-88
-102
-101.85
dB
S21
Mag.
Ang.
dB
S12
Mag.
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
21.56
21.02
20.19
18.49
16.93
15.57
14.36
12.34
10.70
9.32
7.98
6.74
5.55
4.55
3.53
2.39
1.02
-0.30
-1.38
-2.40
-3.53
-4.99
-4.99
11.973
11.252
10.217
8.405
7.024
6.002
5.223
4.141
3.428
2.923
2.506
2.173
1.894
1.689
1.501
1.317
1.125
0.966
0.853
0.759
0.666
0.563
0.563
151
135
123
104
87
73
61
37
16
-6
-26
-46
-65
-85
-104
-124
-143
-160
-176
167
151
134
134
0.03
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.12
0.13
0.13
0.14
0.15
0.15
0.14
0.13
0.13
0.13
0.13
0.12
0.12
0.030
0.042
0.051
0.064
0.074
0.081
0.087
0.098
0.108
0.117
0.124
0.130
0.134
0.141
0.145
0.145
0.140
0.133
0.130
0.131
0.130
0.119
0.119
68
56
48
36
27
19
12
-1
-13
-27
-41
-54
-68
-82
-97
-113
-128
-141
-152
-165
-180
168
168
0.33
0.27
0.26
0.24
0.22
0.21
0.20
0.19
0.20
0.21
0.24
0.29
0.34
0.38
0.42
0.47
0.53
0.58
0.62
0.65
0.68
0.71
0.71
-39
-63
-80
-109
-131
-150
-167
165
138
111
86
63
42
26
8
-11
-29
-43
-58
-71
-86
-103
-103
26.01
24.28
23.02
21.18
20.46
19.77
18.70
17.75
16.26
15.02
12.93
11.14
10.09
9.24
8.79
8.09
7.35
6.76
6.19
5.62
4.43
3.60
3.15
ATF-34143 Typical Noise Parameters
0.5
0.9
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.10
0.13
0.14
0.17
0.20
0.22
0.28
0.34
0.45
0.57
0.69
0.81
0.94
1.06
1.19
opt
Mag.
Ang.
Rn/50
-
Ga
dB
0.87
0.82
0.80
0.73
0.70
0.66
0.60
0.54
0.45
0.40
0.38
0.39
0.43
0.51
0.62
13
27
31
49
60
67
85
104
142
180
-144
-111
-82
-57
-40
0.16
0.14
0.13
0.11
0.10
0.09
0.07
0.05
0.03
0.03
0.05
0.11
0.20
0.32
0.47
22.8
19.4
18.9
17.4
16.9
16.4
15.6
14.8
13.3
12.0
10.9
9.9
9.1
8.5
8.1
30
25
MSG
20
MSG/MAG and
S21 (dB)
VDS = 4 V, IDS = 40 mA
Freq.
Fmin
GHz
dB
15
10
MAG
S21
5
0
-5
0
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
Figure 25. MSG/MAG and |S21|2 vs. Frequency
at 4 V, 40 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based
on a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the
gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via
holes are placed within 0.010 inch from each source lead contact point, one via on each side of that point.
9
ATF-34143 Typical Scattering Parameters, VDS = 4 V, IDS = 60 mA
Freq.
GHz
Mag.
S11
Ang.
0.5
0.8
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
0.95
0.89
0.85
0.78
0.75
0.73
0.69
0.67
0.64
0.63
0.64
0.66
0.69
0.73
0.76
0.78
0.81
0.84
0.86
0.87
0.86
0.86
0.89
-41
-65
-83
-111
-122
-133
-151
-168
161
134
111
86
65
46
28
9
-11
-30
-44
-56
-72
-88
-101.99
dB
S21
Mag.
Ang.
dB
S12
Mag.
Ang.
Mag.
S22
Ang.
MSG/MAG
dB
21.91
21.33
20.46
18.74
17.92
17.16
15.78
14.56
12.53
10.88
9.49
8.15
6.92
5.72
4.73
3.70
2.57
1.20
-0.12
-1.21
-2.21
-3.35
-4.81
12.454
11.654
10.549
8.646
7.873
7.207
6.149
5.345
4.232
3.501
2.983
2.557
2.217
1.932
1.723
1.531
1.344
1.148
0.986
0.870
0.775
0.680
0.575
150
134
123
103
95
87
73
60
37
16
-5
-26
-46
-65
-84
-104
-124
-143
-159
-175
168
151
135
-31.06
-28.18
-26.56
-24.44
-23.74
-23.22
-22.38
-21.62
-20.54
-19.58
-18.79
-18.27
-17.79
-17.46
-16.95
-16.71
-16.71
-17.02
-17.46
-17.59
-17.59
-17.65
-18.42
0.028
0.039
0.047
0.060
0.065
0.069
0.076
0.083
0.094
0.105
0.115
0.122
0.129
0.134
0.142
0.146
0.146
0.141
0.134
0.132
0.132
0.131
0.120
68
57
49
38
33
29
22
15
3
-10
-24
-38
-51
-65
-79
-94
-111
-126
-139
-150
-163
-178
169
0.29
0.24
0.23
0.21
0.21
0.20
0.19
0.19
0.18
0.19
0.21
0.24
0.28
0.33
0.38
0.42
0.47
0.52
0.58
0.62
0.65
0.68
0.71
-41
-67
-84
-114
-125
-136
-155
-171
162
135
109
84
62
42
25
7
-12
-29
-43
-58
-71
-86
-104
26.48
24.75
23.51
21.59
20.83
20.19
19.08
18.09
16.53
15.23
12.89
11.22
10.21
9.36
8.94
8.23
7.56
6.94
6.37
5.78
4.60
3.79
3.33
ATF-34143 Typical Noise Parameters
0.5
0.9
1.0
1.5
1.8
2.0
2.5
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
0.11
0.14
0.15
0.20
0.23
0.26
0.33
0.39
0.53
0.67
0.81
0.96
1.10
1.25
1.39
opt
Mag.
Ang.
Rn/50
-
0.84
0.78
0.77
0.69
0.66
0.62
0.55
0.50
0.43
0.39
0.39
0.42
0.47
0.54
0.62
15
30
34
53
62
72
91
111
149
-173
-137
-104
-76
-53
-37
0.14
0.12
0.12
0.10
0.10
0.09
0.07
0.05
0.03
0.04
0.07
0.14
0.26
0.41
0.60
Ga
dB
24.5
20.7
20.2
18.5
17.7
17.2
16.3
15.4
13.7
12.3
11.1
10.0
9.2
8.6
8.2
30
25
20
MSG/MAG and
S21 (dB)
VDS = 4 V, IDS = 60 mA
Freq.
Fmin
GHz
dB
MSG
15
10
MAG
S21
5
0
-5
-10
0
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
Figure 26. MSG/MAG and |S21|2 vs. Frequency
at 4 V, 60 mA.
Notes:
1. Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based
on a set of 16 noise figure measurements made at 16 different impedances using an ATN NP5 test system. From these measurements a true Fmin
is calculated. Refer to the noise parameter application section for more information.
2. S and noise parameters are measured on a microstrip line made on 0.025 inch thick alumina carrier. The input reference plane is at the end of the
gate lead. The output reference plane is at the end of the drain lead. The parameters include the effect of four plated through via holes connecting source landing pads on top of the test carrier to the microstrip ground plane on the bottom side of the carrier. Two 0.020 inch diameter via
holes are placed within 0.010 inch from each source lead contact point, one via on each side of that point.
10
Noise Parameter Applications Information
Fmin values at 2 GHz and higher are based on measurements while the Fmins below 2 GHz have been extrapolated. The Fmin values are based on a set of 16 noise figure
measurements made at 16 different impedances using an
ATN NP5 test system. From these measurements, a true
Fmin is calculated. Fmin represents the true minimum noise
figure of the device when the device is presented with an
impedance matching network that transforms the source
impedance, typically 50Ω, to an impedance represented
by the reflection coefficient o. The designer must design
a matching network that will present o to the device with
minimal associated circuit losses. The noise figure of the
completed amplifier is equal to the noise figure of the
device plus the losses of the matching network preceding
the device. The noise figure of the device is equal to Fmin
only when the device is presented with o. If the reflection
coefficient of the matching network is other than o, then
the noise figure of the device will be greater than Fmin
based on the following equation.
NF = Fmin + 4 Rn
|s – o | 2
Zo (|1 + o| 2)(1 –s| 2)
Where Rn /Zo is the normalized noise resistance, o is the
optimum reflection coefficient required to produce Fmin
and s is the reflection coefficient of the source impedance actually presented to the device. The losses of the
matching networks are non-zero and they will also add
11
to the noise figure of the device creating a higher amplifier noise figure. The losses of the matching networks
are related to the Q of the components and associated
printed circuit board loss. o is typically fairly low at higher
frequencies and increases as frequency is lowered. Larger
gate width devices will typically have a lower o as compared to narrower gate width devices.
Typically for FETs, the higher o usually infers that an impedance much higher than 50Ω is required for the device
to produce Fmin. At VHF frequencies and even lower L
Band frequencies, the required impedance can be in the
vicinity of several thousand ohms. Matching to such a
high impedance requires very hi-Q components in order
to minimize circuit losses. As an example at 900 MHz,
when airwwound coils (Q > 100) are used for matching
networks, the loss can still be up to 0.25 dB which will add
directly to the noise figure of the device. Using muiltilayer
molded inductors with Qs in the 30 to 50 range results
in additional loss over the airwound coil. Losses as high
as 0.5 dB or greater add to the typical 0.15 dB Fmin of the
device creating an amplifier noise figure of nearly 0.65 dB.
A discussion concerning calculated and measured circuit
losses and their effect on amplifier noise figure is covered
in Avago Application 1085.
ATF-34143 SC-70 4 Lead, High Frequency Nonlinear Model
Optimized for 0.1–6.0 GHz
R
EQUATION La=0.1 nH
EQUATION Lb=0.1 nH
EQUATION Lc=0.8 nH
EQUATION Ld=0.6 nH
EQUATION Rb=0.1 OH
EQUATION Ca=0.15 pF
EQUATION Cb=0.15 pF
L
R=0.1 OH
LOSSYL
L=Lb
R=Rb
SOURCE
L=Lb
R=Rb
L=Lc
C
L
LOSSYL
LOSSYL
GATE_IN
L=Lb
R=Rb
D
L=La *.5
C=Cb
C
C=Ca
G
L
SOURCE
L=La
S
L
LOSSYL
LOSSYL
DRAIN_OUT
L=Lb
R=Rb
L=Lb
R=Rb
L=Ld
data in this data sheet. For future improvements Avago
reserves the right to change these models without prior
notice.
This model can be used as a design tool. It has been tested
on MDS for various specifications. However, for more
precise and accurate design, please refer to the measured
ATF-34143 Die Model
MESFET MODEL *
* STATZMODEL
= FET
IDS model
NFET=yes
PFET=
IDSMOD=3
VTO=–0.95
BETA= Beta
LAMBDA=0.09
ALPHA=4.0
B=0.8
TNOM=27
IDSTC=
VBI=.7
Gate model
Parasitics
DELTA=.2
GSCAP=3
CGS=cgs pF
GDCAP=3
GCD=Cgd pF
Breakdown
RG=1
RD=Rd
RS=Rs
LG=Lg nH
LD=Ld nH
LS=Ls nH
CDS=Cds pF
CRF=.1
RC=Rc
GSFWD=1
GSREV=0
GDFWD=1
GDREV=0
VJR=1
IS=1 nA
IR=1 nA
IMAX=.1
XTI=
N=
EG=
Noise
FNC=01e+6
R=.17
P=.65
C=.2
Model scal factors (W=FET width in microns)
XX
D
EQUATION Cds=0.01*W/200
EQUATION Beta=0.06*W/200
EQUATION Rd=200/W
NFETMESFET
G
XX
EQUATION Rs=.5*200/W
EQUATION Cgs=0.2*W/200
EQUATION Cgd=0.04*W/200
EQUATION Lg=0.03*200/W
12
S
XX
EQUATION Ld=0.03*200/W
EQUATION Ls=0.01*200/W
EQUATION Rc=500*200/W
MODEL=FET
W=800 μm
S
Part Number Ordering Information
No. of
Devices
Part Number
Container
ATF-34143-TR1G
3000
7” Reel
ATF-34143-TR2G
10000
13” Reel
ATF-34143-BLKG
100
antistatic bag
Package Dimensions
SC-70 4L/SOT-343
Recommended PCB Pad Layout for
Avago’s SC70 4L/SOT-343 Products
1.30
(0.051)
1.30 (.051)
BSC
1.00
(0.039)
HE
E
2.00
(0.079)
0.60
(0.024)
1.15 (.045) BSC
0.9
(0.035)
b1
1.15
(0.045)
D
Dimensions in
A2
A
A1
b
L
C
DIMENSIONS (mm)
SYMBOL
E
D
HE
A
A2
A1
b
b1
c
L
13
MIN.
1.15
1.85
1.80
0.80
0.80
0.00
0.15
0.55
0.10
0.10
MAX.
1.35
2.25
2.40
1.10
1.00
0.10
0.40
0.70
0.20
0.46
NOTES:
1. All dimensions are in mm.
2. Dimensions are inclusive of plating.
3. Dimensions are exclusive of mold flash & metal burr.
4. All specifications comply to EIAJ SC70.
5. Die is facing up for mold and facing down for trim/form,
ie: reverse trim/form.
6. Package surface to be mirror finish.
mm
(inches)
Device Orientation
REEL
4 mm
CARRIER
TAPE
8 mm
4PX
4PX
USER
FEED
DIRECTION
4PX
4PX
TOP VIEW
END VIEW
COVER TAPE
Tape Dimensions for Outline 4T
P
P2
D
P0
E
F
W
C
D1
t1 (CARRIER TAPE THICKNESS)
Tt (COVER TAPE THICKNESS)
K0
10° MAX.
A0
DESCRIPTION
10° MAX.
B0
SYMBOL
SIZE (mm)
SIZE (INCHES)
CAVITY
LENGTH
WIDTH
DEPTH
PITCH
BOTTOM HOLE DIAMETER
A0
B0
K0
P
D1
2.40 ± 0.10
2.40 ± 0.10
1.20 ± 0.10
4.00 ± 0.10
1.00 + 0.25
0.094 ± 0.004
0.094 ± 0.004
0.047 ± 0.004
0.157 ± 0.004
0.039 + 0.010
PERFORATION
DIAMETER
PITCH
POSITION
D
P0
E
1.55 ± 0.10
4.00 ± 0.10
1.75 ± 0.10
0.061 + 0.002
0.157 ± 0.004
0.069 ± 0.004
CARRIER TAPE
WIDTH
THICKNESS
W
t1
8.00 + 0.30 - 0.10
0.254 ± 0.02
0.315 + 0.012
0.0100 ± 0.0008
COVER TAPE
WIDTH
TAPE THICKNESS
C
Tt
5.40 ± 0.10
0.062 ± 0.001
0.205 + 0.004
0.0025 ± 0.0004
DISTANCE
CAVITY TO PERFORATION
(WIDTH DIRECTION)
F
3.50 ± 0.05
0.138 ± 0.002
CAVITY TO PERFORATION
(LENGTH DIRECTION)
P2
2.00 ± 0.05
0.079 ± 0.002
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-3746EN
AV02-1283EN - June 8, 2012
Similar pages