AVAGO AVT-55689 50 â 6000 mhz ingap hbt gain block Datasheet

AVT-55689
50 – 6000 MHz
InGaP HBT Gain Block
Data Sheet
Description
Features
Avago Technologies’ AVT-55689 is an economical, easy-touse, general purpose InGaP HBT MMIC gain block amplifier
utilizing Darlington pair configuration housed in a 3-lead
(SOT 89) surface mount plastic package.
• Small signal gain amplifier
The Darlington feedback structure provides inherent
broad bandwidth performance, resulting in useful
operating frequency up to 6 GHz. This is an ideal device
for small-signal gain cascades or IF amplification.
AVT-55689 is fabricated using advanced InGaP HBT
(hetero-junction Bipolar Transistor) technology that
offering state-of-the-art reliability, temperature stability
and performance consistency.
Component Image
• Operating frequency 50 MHz to 6 GHz
• Unconditionally stable
• 50 Ohm input & output
• Industry standard SOT-89
• Lead-free, RoHS compliant, Green
Specifications
2 GHz, 5 V Vcc, 75 mA (typ.)
• 17.2 dB Gain
• 19.5 dBm P1dB
• 32.5 dBm OIP3
• 4.3 dB NF
• 19 dB IRL and 10.7 dB ORL
55X
Applications
• Wireless Data / WLAN
#1
#2
RFin
GND
Top View
#3
RFout
#3
#2
RFout
GND
#1
RFin
Bottom View
Notes:
Package marking provides orientation and identification
“55” = Device Code
“X” = Month of manufacture
• WiMAX / WiBRO
• CATV & Cable modem
• ISM
Typical Biasing Configuration
Vcc
Cbyp
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 140 V
ESD Human Body Model = 1600 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Cbyp
L
Cblock
RFin
Cblock
Pin 1
Input
Pin 2
(Gnd)
Pin 3
Output
RFout
Absolute Maximum Rating (1) TA = 25° C
Thermal Resistance
Symbol
Parameter
Units
Absolute Max.
Vd, MAX
Device Voltage
V
5.5
PIN, MAX
CW RF Input Power
dBm
18
PDISS
Total Power Dissipation (2)
mW
550
TOPT
Operating Temperature
°C
-40 to 85
TJ, MAX
Junction Temperature
°C
150
TSTG
Storage Temperature
°C
-65 to 150
Thermal Resistance (3) θjc = 111° C/W
(Id = 75 mA, Tc = 85° C)
Notes:
1. Operation of this device in excess of any of
these limits may cause permanent damage.
2. Ground lead temperature is 25° C. Derate 8.9
mW/° C for Tc>108° C.
3. Thermal resistance measured using Infrared
measurement technique.
Electrical Specification (1)
TA = 25° C, Zo = 50 Ω, VCC = 5 V, Pin = -15 dBm (unless specified otherwise)
Symbol
Parameter and Test Condition
Id
Device Current
Frequency
Gp
Power Gain
f3dB
3 dB Bandwidth
OIP3 (2)
Output 3rd Intercept Point
900 MHz
2000 MHz
dBm
S11
Input Return Loss, 50 Ω source
900 MHz
2000 MHz
dB
-27
-19
S22
Output Return Loss, 50 Ω load
900 MHz
2000 MHz
dB
-14
-10.7
S12
Reverse Isolation
900 MHz
2000 MHz
dB
-22.6
-22.7
P1dB
Output Power at 1 dB Gain Compression
900 MHz
2000 MHz
dBm
20.6
19.5
NF
Noise Figure
900 MHz
2000 MHz
dB
4.1
4.3
900 MHz
2000 MHz
Units
Min.
Typ.
Max.
mA
66
75
86
15.5
18.8
17.2
18.5
dB
GHz
2.5
30
Note :
1. Measurements obtained on CPWG line with reference plane at the ends of DUT leads (as shown in Figure 1).
2. OIP3 test condition: FRF1 - FRF2 = 10 MHz with input power of -15 dBm per tone measured at worse side band.
2
35
32.5
VCC
RFin
Pin 3
Output
Zo = 50 Ohm
Pin 1
Input
Bias Tee
Zo = 50 Ohm
RFout
Pin 2
GND
Figure 1. Block diagram of board used for Id, Gain, OIP3, S11, S22, S12, OP1dB and NF measurements.
Circuit losses have been de-embedded from actual measurements.
Product Consistency Distribution Charts at 2 GHz, Vcc = 5 V
LSL
USL
68
72
76
80
84
Figure 2. Id (mA) distribution. LSL = 66, Nominal = 76, USL = 86.
LSL
USL
16
17
18
Figure 3. Gain (dB) distribution. LSL = 15.5, Nominal = 17, USL = 18.5.
LSL
30
31
32
33
34
Figure 4. OIP3 (dBm) distribution. LSL = 30, Nominal = 32.2.
Notes:
1. Statistical distribution determined from a sample size of 9175 samples taken from 6 different wafers, measured on a production test board.
2. Future wafers allocated to this product may have typical values anywhere between the minimum and maximum specification limits.
3
AVT-55689 Typical Performance Curves
TA = 25° C, Zo = 50 Ω, Vcc = 5.0 V, Pin = -15 dBm (unless specified otherwise)
22
22
4.5 V
5.0 V
5.5 V
20
18
Gain (dB)
Gain (dB)
18
16
14
12
12
0
1
2
Frequency (GHz)
3
10
4
Figure 5. Gain vs. Frequency and Voltage
6.0
3
4
3
4
5.5
5.5
5.0
4.5
5.0
4.5
4.0
4.0
3.5
3.5
0
1
2
Frequency (GHz)
3
3.0
4
Figure 7. Noise Figure vs. Frequency and Voltage
0
1
2
Frequency (GHz)
Figure 8. Noise Figure vs. Frequency and Temperature
24
24
4.5 V
5.0 V
5.5 V
22
20
18
16
18
16
14
14
12
12
0
1
2
Frequency (GHz)
Figure 9. P1dB vs. Frequency and Voltage
3
25° C
85° C
-40° C
22
P1dB (dBm)
20
P1dB (dBm)
2
Frequency (GHz)
25° C
85° C
-40° C
6.5
NF (dB)
NF (dB)
6.0
10
1
7.0
4.5 V
5.0 V
5.5 V
6.5
3.0
0
Figure 6. Gain vs. Frequency and Temperature
7.0
4
16
14
10
25° C
85° C
-40° C
20
4
10
0
1
2
Frequency (GHz)
Figure 10. P1dB vs. Frequency and Temperature
3
4
AVT-55689 Typical Performance Curves
TA = 25° C, Zo = 50 Ω, Vcc = 5.0 V, Pin = -15 dBm (unless specified otherwise), continued
42
42
4.5 V
5.0 V
5.5 V
38
34
OIP3 (dBm)
OIP3 (dBm)
38
30
26
22
0
1
2
Frequency (GHz)
3
2
Frequency (GHz)
3
4
-5
-10
80
S11 (dB)
Id (mA)
1
0
100
60
-15
-20
40
-25
20
-30
0
1
2
3
Vd (V)
4
5
6
Figure 13. Id vs Vd and Temperature
-5
-10
-15
25° C
85° C
-40° C
-20
0
1
2
3
4
5
6
Frequency (GHz)
Figure 15. S22 vs Frequency and Temperature
-35
25° C
85° C
-40° C
0
1
2
3
4
5
6
Frequency (GHz)
Figure 14. S11 vs Frequency and Temperature
0
-25
0
Figure 12. OIP3 vs. Frequency and Temperature
25° C
85° C
-40° C
120
S22 (dB)
30
22
4
140
5
34
26
Figure 11. OIP3 vs. Frequency and Voltage
0
25° C
85° C
-40° C
7
8
9
10
7
8
9
10
AVT-55689 Typical Scattering Parameters TA = 25° C, Zo = 50 Ω, Vcc = 4.5 V, (unless specified otherwise)
S11
S21
S12
S22
Freq (GHz)
mag
angle
dB
mag
angle
mag
angle
mag
angle
K
0.05
0.06
-86.4
19.16
9.08
172.5
0.08
4.2
0.15
-38.6
1.0
0.10
0.03
-96.8
19.02
8.94
171.9
0.08
0.6
0.12
-31.7
1.1
0.50
0.03
26.8
18.78
8.69
151.4
0.08
-9.6
0.15
-61.8
1.1
0.90
0.06
-19.2
18.41
8.33
130.0
0.08
-17.4
0.21
-90.2
1.1
1.50
0.11
-57.6
17.66
7.63
98.8
0.08
-28.1
0.26
-126.7
1.1
2.00
0.13
-85.0
16.87
6.98
73.7
0.08
-36.5
0.30
-159.4
1.1
2.50
0.15
-109.9
16.00
6.31
49.7
0.08
-44.9
0.35
172.1
1.1
3.00
0.16
-134.3
15.09
5.68
26.7
0.08
-53.8
0.40
146.4
1.1
3.50
0.16
-163.0
14.15
5.10
4.2
0.08
-63.5
0.45
122.8
1.1
4.00
0.17
164.0
13.17
4.55
-17.6
0.08
-74.2
0.48
101.2
1.1
4.50
0.20
134.5
12.14
4.05
-38.8
0.09
-85.7
0.51
81.9
1.1
5.00
0.24
113.5
11.12
3.60
-59.0
0.09
-97.5
0.53
65.0
1.1
5.50
0.28
78.8
9.86
3.11
-81.5
0.09
-112.7
0.58
36.5
1.1
6.00
0.31
57.6
8.58
2.68
-101.6
0.09
-126.4
0.63
18.3
1.1
6.50
0.33
38.8
7.32
2.32
-120.6
0.09
-139.8
0.67
3.3
1.2
7.00
0.36
19.7
6.13
2.03
-139.0
0.09
-153.3
0.70
-10.2
1.2
7.50
0.39
0.6
4.99
1.78
-157.0
0.09
-167.1
0.72
-23.1
1.3
8.00
0.44
-16.3
3.81
1.55
-174.4
0.09
179.2
0.72
-35.8
1.3
8.50
0.50
-29.6
2.56
1.34
169.0
0.08
165.9
0.73
-48.6
1.4
9.00
0.56
-39.7
1.20
1.15
153.6
0.08
153.2
0.74
-61.0
1.5
9.50
0.60
-47.9
-0.26
0.97
139.4
0.07
141.4
0.76
-72.5
1.6
10.00
0.63
-55.7
-1.78
0.81
126.2
0.07
130.4
0.79
-82.3
1.7
10.50
0.65
-64.4
-3.33
0.68
113.8
0.06
119.6
0.82
-90.4
1.8
11.00
0.67
-74.7
-4.86
0.57
101.6
0.06
109.0
0.84
-97.4
1.9
11.50
0.69
-86.5
-6.35
0.48
89.3
0.05
97.9
0.86
-104.3
2.1
12.00
0.72
-99.1
-7.78
0.41
76.4
0.05
86.1
0.87
-111.7
2.3
12.50
0.75
-111.1
-9.10
0.35
63.5
0.05
74.0
0.88
-119.8
2.6
13.00
0.78
-121.1
-10.27
0.31
51.0
0.04
62.5
0.88
-128.3
2.8
13.50
0.80
-128.5
-11.29
0.27
39.8
0.04
51.8
0.88
-137.0
2.9
14.00
0.81
-133.8
-12.15
0.25
29.7
0.04
42.4
0.88
-145.5
3.0
14.50
0.82
-137.8
-12.88
0.23
20.6
0.04
34.2
0.89
-153.0
3.1
15.00
0.81
-141.8
-13.51
0.21
12.1
0.04
26.3
0.90
-159.7
3.3
16.00
0.79
-154.3
-14.78
0.18
-5.3
0.04
12.4
0.90
-171.7
4.4
17.00
0.79
-171.8
-15.94
0.16
-21.9
0.04
3.8
0.91
176.5
4.4
18.00
0.81
172.9
-17.08
0.14
-38.4
0.04
-9.0
0.91
164.6
4.4
19.00
0.81
160.9
-17.87
0.13
-53.8
0.04
-21.2
0.91
150.9
4.8
20.00
0.78
147.2
-18.38
0.12
-69.3
0.05
-33.3
0.90
136.8
5.7
Notes:
1. S-parameters are measured on a CPWG line fabricated on 0.025 inch thick Rogers RO4350 material. The input reference plane is at the end of the
input lead. The output reference plane is at the end of the output lead.
6
AVT-55689 Typical Scattering Parameters TA = 25° C, Zo = 50 Ω, Vcc = 5.0 V, (unless specified otherwise)
S11
S21
S12
S22
Freq (GHz)
mag
angle
dB
mag
angle
mag
angle
mag
angle
K
0.05
0.07
-112.9
19.54
9.49
172.4
0.08
3.8
0.13
-46.3
1.0
0.10
0.04
-144.7
19.40
9.34
171.9
0.08
0.3
0.09
-39.1
1.1
0.50
0.02
89.5
19.16
9.08
151.4
0.07
-9.7
0.13
-68.6
1.1
0.90
0.04
-3.2
18.80
8.71
129.8
0.07
-17.5
0.19
-95.1
1.1
1.50
0.09
-53.3
18.04
7.98
98.5
0.07
-28.2
0.24
-130.6
1.1
2.00
0.11
-83.2
17.24
7.28
73.3
0.07
-36.5
0.29
-162.7
1.1
2.50
0.13
-109.5
16.36
6.58
49.1
0.07
-44.8
0.34
169.5
1.1
3.00
0.14
-134.9
15.43
5.91
26.0
0.07
-53.3
0.40
144.4
1.1
3.50
0.15
-164.8
14.47
5.29
3.5
0.08
-62.8
0.44
121.3
1.1
4.00
0.16
161.5
13.47
4.72
-18.5
0.08
-73.3
0.48
99.9
1.1
4.50
0.20
132.2
12.43
4.18
-39.7
0.08
-84.5
0.51
80.9
1.1
5.00
0.24
111.4
11.39
3.71
-60.0
0.09
-96.1
0.53
64.1
1.1
5.50
0.29
77.2
10.11
3.20
-82.5
0.09
-111.1
0.58
35.8
1.1
6.00
0.32
56.3
8.80
2.75
-102.6
0.09
-124.6
0.63
17.8
1.2
6.50
0.34
37.5
7.53
2.38
-121.6
0.09
-138.0
0.67
2.8
1.2
7.00
0.36
18.4
6.32
2.07
-140.1
0.09
-151.5
0.70
-10.6
1.2
7.50
0.40
-0.7
5.16
1.81
-158.1
0.08
-165.1
0.72
-23.4
1.3
8.00
0.45
-17.4
3.97
1.58
-175.4
0.08
-178.9
0.72
-36.1
1.3
8.50
0.51
-30.7
2.70
1.36
168.1
0.08
167.9
0.73
-49.0
1.4
9.00
0.56
-40.7
1.33
1.17
152.8
0.08
155.3
0.74
-61.4
1.5
9.50
0.61
-48.9
-0.14
0.98
138.6
0.07
143.6
0.76
-72.8
1.6
10.00
0.64
-56.6
-1.67
0.83
125.6
0.07
132.5
0.79
-82.7
1.7
10.50
0.66
-65.3
-3.21
0.69
113.2
0.06
121.9
0.82
-90.7
1.8
11.00
0.68
-75.6
-4.75
0.58
101.1
0.06
111.2
0.84
-97.7
1.9
11.50
0.70
-87.3
-6.24
0.49
88.9
0.05
100.1
0.86
-104.5
2.1
12.00
0.72
-99.8
-7.67
0.41
76.1
0.05
88.3
0.87
-111.9
2.4
12.50
0.75
-111.7
-8.99
0.36
63.2
0.04
76.2
0.88
-120.0
2.6
13.00
0.78
-121.6
-10.16
0.31
50.8
0.04
64.6
0.88
-128.5
2.8
13.50
0.80
-129.0
-11.18
0.28
39.5
0.04
53.9
0.88
-137.2
2.9
14.00
0.81
-134.2
-12.03
0.25
29.4
0.04
44.5
0.88
-145.6
3.1
14.50
0.82
-138.3
-12.76
0.23
20.4
0.04
36.0
0.89
-153.2
3.2
15.00
0.81
-142.2
-13.39
0.21
11.9
0.04
28.1
0.90
-159.9
3.3
16.00
0.79
-154.7
-14.65
0.19
-5.6
0.04
14.1
0.90
-171.9
4.4
17.00
0.79
-172.2
-15.80
0.16
-22.2
0.04
5.3
0.91
176.3
4.4
18.00
0.81
172.5
-16.95
0.14
-38.8
0.04
-7.8
0.91
164.4
4.4
19.00
0.81
160.6
-17.74
0.13
-54.3
0.04
-20.5
0.91
150.8
4.8
20.00
0.78
146.9
-18.25
0.12
-70.0
0.05
-32.9
0.90
136.6
5.6
Notes:
1. S-parameters are measured on a CPWG line fabricated on 0.025 inch thick Rogers RO4350 material. The input reference plane is at the end of the
input lead. The output reference plane is at the end of the output lead.
7
AVT-55689 Typical Scattering Parameters TA = 25° C, Zo = 50 Ω, Vcc = 5.5 V, (unless specified otherwise)
S11
S21
S12
S22
Freq (GHz)
mag
angle
dB
mag
angle
mag
angle
mag
angle
K
0.05
0.07
-122.8
19.71
9.67
172.3
0.07
3.3
0.12
-50.2
1.0
0.10
0.05
-155.3
19.56
9.51
171.8
0.07
0.4
0.09
-43.1
1.1
0.50
0.03
109.9
19.33
9.25
151.4
0.07
-9.7
0.11
-70.8
1.1
0.90
0.04
9.0
18.97
8.89
129.8
0.07
-17.6
0.18
-96.2
1.1
1.50
0.08
-51.4
18.22
8.15
98.3
0.07
-28.2
0.23
-131.0
1.1
2.00
0.11
-83.1
17.44
7.45
73.0
0.07
-36.5
0.28
-162.9
1.1
2.50
0.13
-110.3
16.56
6.73
48.7
0.07
-44.5
0.33
169.4
1.1
3.00
0.14
-136.6
15.62
6.04
25.4
0.07
-53.1
0.38
144.3
1.1
3.50
0.15
-167.0
14.65
5.40
2.7
0.08
-62.4
0.43
121.2
1.1
4.00
0.17
159.3
13.65
4.81
-19.4
0.08
-72.8
0.47
99.9
1.1
4.50
0.21
130.3
12.59
4.26
-40.8
0.08
-84.0
0.50
80.9
1.1
5.00
0.25
109.6
11.53
3.77
-61.2
0.09
-95.6
0.52
64.1
1.1
5.50
0.30
76.1
10.23
3.25
-83.8
0.09
-110.6
0.57
35.7
1.1
6.00
0.33
55.2
8.91
2.79
-103.9
0.09
-124.1
0.62
17.8
1.2
6.50
0.36
36.3
7.62
2.40
-123.0
0.08
-137.4
0.66
2.8
1.2
7.00
0.38
17.3
6.39
2.09
-141.4
0.08
-150.9
0.69
-10.6
1.2
7.50
0.41
-1.7
5.21
1.82
-159.4
0.08
-164.7
0.71
-23.4
1.3
8.00
0.46
-18.4
4.00
1.59
-176.8
0.08
-178.4
0.72
-36.1
1.4
8.50
0.52
-31.6
2.72
1.37
166.7
0.08
168.4
0.72
-48.9
1.4
9.00
0.57
-41.6
1.34
1.17
151.5
0.08
155.9
0.73
-61.3
1.5
9.50
0.61
-49.7
-0.14
0.98
137.4
0.07
144.2
0.76
-72.7
1.6
10.00
0.64
-57.4
-1.67
0.82
124.3
0.07
133.2
0.78
-82.5
1.7
10.50
0.66
-66.1
-3.22
0.69
112.0
0.06
122.5
0.81
-90.6
1.8
11.00
0.68
-76.3
-4.76
0.58
100.0
0.06
111.8
0.84
-97.6
2.0
11.50
0.70
-88.0
-6.26
0.49
87.7
0.05
100.6
0.86
-104.5
2.2
12.00
0.72
-100.4
-7.69
0.41
75.0
0.05
88.9
0.87
-111.8
2.4
12.50
0.75
-112.2
-9.01
0.35
62.1
0.04
76.8
0.87
-119.9
2.6
13.00
0.78
-122.1
-10.19
0.31
49.7
0.04
65.1
0.88
-128.4
2.9
13.50
0.80
-129.5
-11.20
0.28
38.4
0.04
54.5
0.88
-137.2
3.0
14.00
0.81
-134.7
-12.06
0.25
28.4
0.04
44.9
0.88
-145.6
3.1
14.50
0.82
-138.7
-12.78
0.23
19.3
0.04
36.5
0.89
-153.2
3.2
15.00
0.81
-142.7
-13.40
0.21
10.8
0.04
28.6
0.89
-159.8
3.4
16.00
0.79
-155.1
-14.67
0.18
-6.7
0.04
14.7
0.90
-171.9
4.5
17.00
0.79
-172.7
-15.83
0.16
-23.4
0.04
5.6
0.91
176.3
4.6
18.00
0.81
172.2
-16.98
0.14
-39.9
0.04
-7.6
0.91
164.5
4.6
19.00
0.81
160.3
-17.79
0.13
-55.6
0.04
-20.4
0.90
150.8
5.0
20.00
0.78
146.5
-18.31
0.12
-71.3
0.05
-32.8
0.90
136.5
5.8
Notes:
1. S-parameters are measured on a CPWG line fabricated on 0.025 inch thick Rogers RO4350 material. The input reference plane is at the end of the
input lead. The output reference plane is at the end of the output lead.
8
Part Number Ordering Information
Part Number
No. of Devices
Container
AVT-55689-BLKG
100
Antistatic Bag
AVT-55689-TR1G
3000
13" Tape/Reel
SOT89 Package Dimensions
D
D
D1
D1
E1
POLISH
E1
OR
E
L
L
e
e
S
S
e1
C
e1
1.625
D2
MATTE FINISH
HALF ETCHING
DEPTH 0.100
1.23
2.35
0.77
0.2
D1
E
b
b1
b
POLISH
1.24
E
A
OR
b1
Dimensions in mm
Symbols
9
Minimum
Nominal
Dimensions in inches
Maximum
Minimum
Nominal
Maximum
A
1.40
1.50
1.60
0.055
0.059
0.063
L
0.89
1.04
1.20
0.0350
0.041
0.047
b
0.36
0.42
0.48
0.014
0.016
0.018
b1
0.41
0.47
0.53
0.016
0.018
0.030
0.017
C
0.38
0.40
0.43
0.014
0.015
D
4.40
4.50
4.60
0.173
0.177
0.181
D1
1.40
1.60
1.75
0.055
0.062
0.069
D2
1.45
1.65
1.80
0.055
0.062
0.069
E
3.94
-
4.25
0.155
-
0.167
E1
2.40
2.50
2.60
0.094
0.098
0.102
e1
2.90
3.00
3.10
0.114
0.118
0.122
S
0.65
0.75
0.85
0.026
0.030
0.034
e
1.40
1.50
1.60
0.054
0.059
0.063
Device Orientation
USER FEED
DIRECTION
55X
55X
55X
CARRIER
TAPE
55X
REEL
COVER TAPE
Tape Dimensions
Ø 1.5 +0.1/-0.0
8.00
0.30 ± .05
Ø 1.50 MIN.
2.00 ± .05 SEE NOTE 3
4.00 SEE NOTE 1
A
R 0.3 MAX.
1.75 ± .10
5.50 ± .05
SEE NOTE 3
Bo
12.0 ± .3
Ko
SECTION A - A
10
Ao
Ao = 4.60
Bo = 4.90
Ko = 1.90
R 0.3 TYP.
A
DIMENSIONS IN MM
NOTES:
1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2
2. CAMBER IN COMPLIANCE WITH EIA 481
3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED
AS TRUE POSITION OF POCKET, NOT POCKET HOLE
Reel Dimensions – 13” Reel
R
LOKREEL
R
MINNEAPOLIS USA
U.S PAT 4726534
102.0
REF
1.5
ATTENTION
Electrostatic Sensitive Devices
Safe Handling Required
88 REF
330.0
REF
"A"
96.5
6
PS
Detail "B"
6
PS
Detail "A"
8.4 - 0.2
(MEASURED AT HUB)
11.1 MAX.
Ø 20.2
Dimensions in mm
M IN
+0.5
Ø 13.0 -0.2
2.0 ± 0.5
For product information and a complete list of distributors, please go to our web site:
+0.3
(MEASURED AT HUB)
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved.
AV02-2705EN - May 23, 2013
Similar pages