AW005G - AW10G PRV : 50 - 1000 Volts Io : 1.5 Amperes AVALANCHE GLASS PASSIVATED BRIDGE RECTIFIERS WOB 0.39 (10.0) 0.31 (7.87) FEATURES : Glass passivated chip High case dielectric strength High surge current capability High reliability Low reverse current Low forward voltage drop Ideal for printed circuit board 0.22 (5.59) 0.18 (4.57) + - AC 1.00 (25.4) MIN. 1.10 (27.9) MIN. * * * * * * * 0.034 (0.86) 0.028 (0.71) MECHANICAL DATA : * Case : Reliable low cost construction utilizing molded plastic technique * Epoxy : UL94V-O rate flame retardant * Terminals : Plated leads solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Polarity symbols marked on case * Mounting position : Any * Weight : 1.29 grams AC - 0.22 (5.59) 0.18 (4.57) AC + 0.22 (5.59) 0.18 (4.57) Dimension in inches and (millimeter) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL AW AW 005G 01G AW 02G AW 04G AW 06G AW 08G AW 10G UNIT 100 200 400 600 800 1000 Volts Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Minimum Avalanche Breakdown Voltage at 100 µA VBO(min.) 100 150 250 450 700 900 1100 Volts Maximum Avalanche Breakdown Voltage at 100 µA VBO(max.) 550 600 700 900 1150 1350 1550 Volts Maximum Average Forward Current 0.375" (9.5 mm) lead length Tc = 25°C IF(AV) 1.5 Amps. IFSM 50 Amps. I2t VF 10 1.0 A2S Volts IR 10 µA IR(H) 1.0 mA CJ 24 pf 36 °C/W Operating Junction Temperature Range RθJA TJ - 50 to + 150 °C Storage Temperature Range TSTG - 50 to + 150 °C Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) Rating for fusing ( t < 8.3 ms. ) Maximum Forward Voltage per Diode at IF = 1.0 Amp. Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Typical Junction Capacitance per Diode (Note 1) Typical Thermal Resistance (Note 2) Notes : 1 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2 ) Thermal resistance from Junction to Ambient at 0.375" (9.5 mm) lead length P.C. Board mounting. UPDATE : APRIL 23,1998 RATING AND CHARACTERISTIC CURVES ( AW005G - AW10G ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 1.5 50 PC Board 0.375(9.5mm) 1.2 Copper Pads 0.22" x 0.22" (5.5 x5.5mm) 0.9 0.6 0.3 60 Hz, Resistive or Inductive load. 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 40 30 20 SINGLE HALF SINE WAVE (JEDEC METHOD) 10 0 175 TJ = 55 °C 1 CASE TEMPERATURE, ( °C) 20 10 TJ = 25 °C 0.1 Pulse Width = 300 µs 1 % Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS 1 2 NUMBER OF CYCLES AT 60Hz 1.8 10 TJ = 100 °C 1.0 TJ = 25 °C 0.1 0.01 0 20 40 60 80 100 120 PERCENT OF RATED REVERSE VOLTAGE, (%) 140