ANADIGICS AWT6624RM45Q7 Multi-mode help4tm umts1700 (band 49310) wcdma/cdma linear pam Datasheet

Multi-Mode HELP4
TM
AWT6624
UMTS1700
(Band 4+9+3+10) WCDMA/CDMA Linear PAM
Data Sheet - Rev 2.8
FEATURES
•
Mixed-Mode (HSPA, EV-DO) Compliant
•
4th Generation HELPTM technology
•
High Efficiency (R99 waveform):
AWT6624
39 % @ POUT = +28.3 dBm
36% @ POUT = +17 dBm
22 % @ POUT = +13.5 dBm
26% @ POUT = +8 dBm
13 % @ POUT = +3.5 dBm
•
Low Quiescent Current: 2 mA
•
Low Leakage Current in Shutdown Mode:
<5 µA
•
Internal Voltage Regulator
•
Integrated “daisy chainable” directional coupler
with CPLIN and CPLOUT port.
•
Optimized for a 50 Ω System
•
1.8 V Control Logic
•
RoHS Compliant Package, 260 oC MSL-3
M45 Package
10 Pin 3 mm x 3 mm x 1 mm
Surface Mount Module
APPLICATIONS
•
Band 4 (also Bands 3, 9 and 10) WCDMA/HSPA
Wireless Devices
•
AWS/KPCS CDMA/EV-DO Wireless Devices
PRODUCT DESCRIPTION
The AWT6624 HELP4 PA is a 4th generation HELP
product for WCDMA devices operating in UMTS1700
(Band 4 + 9) and for CDMA devices operating in
AWS/KPCS band. This PA incorporates ANADIGICS’
HELP4TM technology to deliver exceptional efficiency
at low power levels and low quiescent current without
the need for external voltage regulators or converters.
The device is manufactured using advanced InGaPPlus TM HBT technology offering state-of-the-art
reliability, temperature stability, and ruggedness.
Three selectable bias modes that optimize efficiency
for different output power levels and a shutdown
mode with low leakage current increase handset
talk and standby time. A “daisy chainable” directional
TM
coupler is integrated in the module, thus eliminating
the need of an external coupler. The self-contained 3 mm x 3 mm x 1 mm surface mount package
incorporates matching networks optimized for output
power, efficiency, and linearity in a 50 Ω system.
GND at Slug (pad)
VBATT
1
RFIN
2
VMODE2
3
VMODE1
VEN
10
VCC
TM
01/2012
9
RFOUT
8
CPLIN
4
7
GND
5
6
CPLOUT
CPL
Bias Control
Voltage Regulation
Figure 1: Block Diagram
AWT6624
VBATT
1
10
RFIN
2
9
RFOUT
VMODE2
3
8
CPLIN
VMODE1
4
7
GND
VEN
5
6
CPLOUT
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
2
PIN
NAME
DESCRIPTION
1
VBATT
Battery Voltage
2
RFIN
RF Input
3
VMODE2
Mode Control Voltage 2
4
VMODE1
Mode Control Voltage 1
5
VEN
6
CPLOUT
7
GND
Ground
8
CPLIN
Coupler Input
9
RFOUT
RF Output
10
VCC
PA Enable Voltage
Coupler Output
Supply Voltage
Data Sheet - Rev 2.8
01/2012
VCC
AWT6624
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
PARAMETER
MIN
MAX
UNIT
Supply Voltage (VCC)
0
+5
V
Battery Voltage (VBATT)
0
+6
V
Control Voltages (VMODE1, VMODE2, VEN)
0
+3.5
V
RF Input Power (PIN)
-
+10
dBm
-40
+150
°C
Storage Temperature (TSTG)
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Table 3: Operating Ranges
PARAMETER
MIN
TYP
MAX
UNIT
Operating Frequency (f)
1710
-
1785
MHz
Supply Voltage (VCC)
+3.2
+3.4
+4.2
V
POUT < +28.3 dBm
Enable Voltage (VEN)
+1.35
0
+1.8
-
+3.1
+0.5
V
PA "on"
PA "shut down"
Mode Control Voltage (VMODE1,VMODE2)
+1.35
0
+1.8
-
+3.1
+0.5
V
Low Bias Mode
High Bias Mode
WCDMAOutput Power (UMTS)
R99, HPM
HSPA (MPR=0), HPM
R99, MPM
HSPA (MPR=0), MPM
R99, LPM
HSPA (MPR=0), LPM
27.8(1)
26.8(1)
17.0
16.0
-
28.3
27.3
17.0
16.0
8.0
7.0
-
dBm
CDMA Output Power
CDMA2000, HPM
CDMA2000, MPM
CDMA, LPM
27.2(1)
7.5(1)
27.7
16.0
8.0
-
-30
-
+90
Case Temperature (TC)
dBm
COMMENTS
3GPP TS 34.121-1, Rel
8 Table C.11.1.3,
SUBTEST 1
CDMA 2000,
RC-1
°C
The device may be operated safely over these conditions; however, parametric performance is guaranteed only
over the conditions defined in the electrical specifications.
Notes:
(1) For Operation at 3.2 V, POUT is derated 0.5 dB.
3
Data Sheet - Rev 2.8
01/2012
AWT6624
Table 4: Electrical Specifications - WCDMA Operation (R99 waveform)
(TC = +25 °C, VCC = +3.4 V, VBATT = +3.4 V, VEN = +1.8 V, 50 Ω system)
COMMENTS
PARAMETER
MIN
TYP
MAX
UNIT
Gain
25
17
7.5
27
20
10
30
23
12.5
dB
+28.3 dBm 0 V
+17 dBm
1.8 V
+8 dBm
1.8 V
0V
0V
1.8 V
ACLR1 at 5 MHz offset (1)
-
-41
-42
-40
-37
-37
-37
dBc
+28.3 dBm 0 V
+17.dBm
1.8 V
+8 dBm
1.8 V
0V
0V
1.8 V
ACLR2 at 10 MHz offset
-
-55
-54
-58
-48
-48
-48
dBc
+28.3 dBm 0 V
+17dBm
1.8 V
+8 dBm
1.8 V
0V
0V
1.8 V
36
32
23
-
39
36
22
26
13
-
+28.3 dBm
+17 dBm
+13.5 dBm
+8 dBm
+3.5 dBm
0V
1.8 V
1.8 V
1.8 V
1.8 V
0V
0V
0 V
1.8 V
1.8 V
Quiescent Current (Icq)
Low Bias Mode
-
2
3.5
mA
through
VCC pin
1.8 V
1.8 V
Mode Control Current
-
0.08
0.15
mA
through VMODE pins, VMODE1,2 = +1.8 V
Enable Current
-
0.04
0.1
mA
through VEN pin
BATT Current
-
0.8
1.5
mA
through VBATT pin, VMODE1,2 = +1.8 V
Leakage Current
-
<5
10
µA
VBATT = +4.2 V, VCC = +4.2 V,
VEN = 0 V, VMODE1,2 = 0 V
Noise Power
-
-140
-135
-135
-132
-148
-137
-132
-132
-
dBm/Hz
Harmonics
2fo
3fo, 4fo
-
-44
-50
-35
-42
dBc
Coupling Factor
-
20
-
dB
Directivity
-
20
-
dB
Daisy Chain Insertion Loss
-
<0.25
-
dB
Spurious Output Level
(all spurious outputs)
-
-
-70
dBc
8:1
-
-
VSWR
Power-Added Efficiency (1)
Load mismatch stress with no
permanent degradation or failure
%
Notes:
(1) ACLR and Efficiency measured at 1747.5 MHz.
4
Data Sheet - Rev 2.8
01/2012
POUT
VMODE1
VMODE2
2110 MHz to 2155 MHz (Band 4)
1805 MHz to 1880 MHz (Band 3)
1844.9 MHz to 1879.9 MHz (Band 9)
GPS Band
ISM Band
POUT < +28.3 dBm
POUT < +28.3 dBm
In-band load VSWR < 5:1
Out-of-band load VSWR < 10:1
Applies over all operating conditions
Applies over full operating range
AWT6624
Table 5: Electrical Specifications - CDMA Operation (CDMA 2000 RCI)
(TC = +25 °C, VBATT = VCC = +3.4 V, VENABLE = +1.8 V, 50 Ω system)
PARAMETER
MIN
TYP
MAX
UNIT
Gain
25
17
7.5
27
20
10
30
23
12.5
Adjacent Channel Power
at +1.25 MHz offset
Primary Channel BW =1.23 MHz
Adjacent Channel BW = 30 kHz
-
-51
-55
-57
Adjacent Channel Power
at + 1.98 MHz offset
Primary Channel = 1.23 MHz
Adjacent Channel = 30 kHz
-
Power-Added Efficiency
Spurious Output Level
(all spurious outputs)
Load mismatch stress with no
permanent degradation or failure
COMMENTS
POUT
VMODE1
VMODE2
dB
POUT = +27.7 dBm
POUT = +16.0 dBm
POUT = +8.0 dBm
0V
1.8 V
1.8 V
0V
0V
1.8 V
-46.5
-46.5
-46.5
dBc
POUT = +27.7 dBm
POUT = +16.0 dBm
POUT = +8.0 dBm
0V
1.8 V
1.8 V
0V
0V
1.8 V
-56
-58
-60
-53
-53
-54
dBc
POUT = +27.7 dBm
POUT = +16.0 dBm
POUT = +8.0 dBm
0V
1.8 V
1.8 V
0V
0V
1.8 V
33
28
20
37
33
25
-
%
POUT = +27.7 dBm
POUT = +16.0 dBm
POUT = +8.0 dBm
0V
1.8 V
1.8 V
0V
0V
1.8 V
-
-
-70
dBc
8:1
-
-
VSWR
See Note 2
Applies over full operating range
Notes:
(1) ACLR and Efficiency measured at 1747.5 MHz.
2. POUT < +27.7 dBm, In-Band VSWR < 5:1, Out-Of-Band VSWR < 10:1. Applies to all operating conditions.
5
Data Sheet - Rev 2.8
01/2012
AWT6624
APPLICATION INFORMATION
To ensure proper performance, refer to all related
Application Notes on the ANADIGICS web site:
http://www.anadigics.com
to the VMODE pins. The Bias Control table below lists
the recommended modes of operation for various
applications.
Shutdown Mode
The power amplifier may be placed in a shutdown mode
by applying logic low levels (see Operating Ranges
table) to the VEN, VMODE1 and VMODE2 voltages.
Three operating modes are recommended to optimize
current consumption. High Bias/High Power operating
mode is for POUT levels > 16 dBm. At ~17dBm - 7 dBm,
the PA could be switched to Medium Power Mode. For
POUT levels < ~8 dBm, the PA could be switched to Low
Power Mode for extremely low current consumption.
Bias Modes
The power amplifier may be placed in either Low,
Medium or High Bias modes by applying the
appropriate logic level (see Operating Ranges table)
Table 6: Bias Control
APPLICATION
POUT
LEVELS
(Rel. 99)
BIAS
MODE
VEN
VMODE1
VMODE2
VCC
VBATT
Low power
(Low Bias Mode)
< +8 dBm
Low
+1.8 V
+1.8 V
+1.8 V
3.2 - 4.2 V
> 3.2 V
Med power
(Medium Bias Mode)
> 7 dBm
< +17 dBm
Low
+1.8 V
+1.8 V
0V
3.2 - 4.2 V
> 3.2 V
High power
(High Bias Mode)
> +16 dBm
High
+1.8 V
0V
0V
3.2 - 4.2 V
> 3.2 V
-
Shutdown
0V
0V
0V
3.2 - 4.2 V
> 3.2 V
Shutdown
VBATT
C5
2.2 µF
C1
0.1µF
1
2
RFIN
VMODE2
VMODE1
VEN
C3
33 pF
GND at slug
VBATT
VCC
RFIN
RFOUT
9
3
VMODE2
CPLIN
8
4
VMODE1
GND
7
5
VEN
CPLIN
CPLOUT 6
Data Sheet - Rev 2.8
01/2012
VCC
C4
2.2 µF ceramic
10
Figure 3: Evaluation Board Schematic
6
C2
0.1µF
C6
33 pF
RFOUT
CPLOUT
AWT6624
PERFORMANCE DATA PLOTS:
(R99 waveform at 1747.5 MHz and 50 V)
4: WCDMAGain
Gain (dB)
over
Temperature
FigureFigure
4: WCDMA
(dB)
over
Temperature
(V(Vbatt=VCC=3.4V)
batt = VCC = 3.4 V)
Figure 5:
WCDMA
Gain
over
Voltage
Figure
5: WCDMA
Gain (dB)
(dB) over
Voltage
)
(TC =(Tc=25C
25 8C)
30
30
-30C 3.4Vcc
25C 3.4Vcc
25
25C 4.2Vcc
20
Gain (dB)
Gain (dB)
25C 3.4Vcc
25
90C 3.4Vcc
20
15
15
10
10
5
5
0
0
5
10
15
20
25
0
30
0
Pout (dBm)
60
10
15
20
25
30
Figure
WCDMA PAE
(%) over
Figure
7:7:WCDMA
PAE
(%) Voltage
over Voltage
(Tc=25C)
(TC = 25 8C)
60
-30 3.4cc
25C 3.4Vcc
50
5
Pout (dBm)
Figure
WCDMA PAE
over
Temperature
Figure
6: 6:
WCDMA
PAE(%)
(%)
over
Temperature
(V(Vbatt=VCC=3.4V)
batt = VCC = 3.4 V)
25C 3.2Vcc
25C 3.4Vcc
50
90C 3.4Vcc
Efficiency
40
Efficiency (%)
25C 3.2Vcc
30
20
25C 4.2Vcc
40
30
20
10
10
0
0
0
0
5
10
15
20
25
5
10
15
20
25
30
Pout (dBm)
30
Pout (dBm)
FigureFigure
9: WCDMA
(dBc)
Voltage
9: WCDMAACLR1
ACLR1 (dBc)
overover
Voltage
(T(Tc=25C)
C = 25 8C)
8: WCDMA
ACRL1 (dBc)
overover
Temperature
Figure 8: Figure
WCDMA
ACLR1
(dBc)
Temperature
(Vbatt=VCC=3.4V)
batt = VCC = 3.4 V)
(V
-20
-20
-30C 3.4Vcc
25C 3.4Vcc
-25
25C 3.4Vcc
25C 4.2Vcc
-30
ACLR1 (5MHz dBc)
ACLR1 (5MHz dBc)
25C 3.2Vcc
-25
90C 3.4Vcc
-35
-40
-45
-50
-30
-35
-40
-45
-50
-55
0
5
10
15
Pout (dBm)
20
25
30
-55
0
7
Data Sheet - Rev 2.8
01/2012
5
10
15
Pout (dBm)
20
25
30
AWT6624
PACKAGE OUTLINE
Figure 10: M45 Package Outline - 10 Pin 3 mm x 3 mm x 1 mm Surface Mount Module
Pin 1 Identifier
Date Code
YY=Year; WW=Work Week
6624R
LLLLNN
YYWWCC
Part Number
Lot Number
Country Code(CC)
Figure 11: Branding Specification - M45 Package
8
Data Sheet - Rev 2.8
01/2012
AWT6624
PCB AND STENCIL DESIGN GUIDELINE
Figure 12: Recommended PCB Layout Information
9
Data Sheet - Rev 2.8
01/2012
AWT6624
COMPONENT PACKAGING
Pin 1
Figure 13: Carrier Tape
Figure 14: Reel
10
Data Sheet - Rev 2.8
01/2012
AWT6624
ORDERING INFORMATION
ORDER NUMBER
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
AWT6624RM45Q7
-30 oC to +90 oC
RoHS-Compliant 10 Pin
3 mm x 3 mm x 1 mm
Surface Mount Module
Tape and Reel, 2500 pieces per
Reel
AWT6624RM45P9
-30 oC to +90 oC
RoHS Compliant 10 Pin
3 mm x 3 mm x 1 mm
Surface Mount Module
Partial Tape and Reel
COMPONENT PACKAGING
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
IMPORTANT NOTICE
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed
to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers
to verify that the information they are using is current before placing orders.
warning
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
11
Data Sheet - Rev 2.8
01/2012
Similar pages