AZM AZ10LVEL32 Ecl/pecl ã· 2 divider Datasheet

ARIZONA MICROTEK, INC.
AZ10LVEL32
AZ100LVEL32
PACKAGE AVAILABILITY
FEATURES
•
•
•
•
•
ECL/PECL ÷ 2 Divider
Operating Range of 3.0V to 5.5V
470ps Propagation Delay
3.0GHz Toggle Frequency
High Bandwidth Output Transitions
Direct Replacement for ON
Semiconductor MC10EL/LVEL32 &
MC100EL/LVEL32
PACKAGE
PART NUMBER
SOIC 8 Green /
RoHS Compliant /
Lead (Pb) Free
TSSOP 8 Green /
RoHS Compliant /
Lead (Pb) Free
MLP 8 (2x2) Green
/ RoHS Compliant /
Lead (Pb) Free
1
2
3
MARKING
NOTES
AZ100LVEL32DG
AZM100G
LVEL32
1,2
AZ100LVEL32TG
AZHG
LV32
1,2
AZ100LVEL32NG
C2G
<Date Code>
1,3
Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts)
Tape & Reel.
Date code format: “Y” or “YY” for year followed by “WW” for week on
underside of part.
Date code format: “Y” for year followed by “WW” for week.
DESCRIPTION
The AZ10/100LVEL32 is an integrated ÷2 divider. The reset pin is asynchronous and is asserted on the rising
edge. Upon power-up, the internal flip-flop will attain a random logic state; the reset allows for the synchronization
of multiple LVEL32’s in a system.
The LVEL32 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device.
For single-ended input applications, the VBB reference should be connected to one side of the CLK/CLK
¯¯¯¯ differential
input pair. The input signal is then fed to the other CLK/CLK
¯¯¯¯ input. The VBB pin should be used only as a bias for
the LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a
0.01μF capacitor.
NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established.
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
PIN DESCRIPTION
RESET 1
PIN
CLK, CLK
¯¯¯
RESET
VBB
Q, Q̄
VCC
VEE
FUNCTION
Clock Inputs
Asynchronous Reset
Reference Voltage Output
Data Outputs
Positive Supply
Negative Supply
8
VCC
7
Q
R
CLK
2
÷2
CLK
3
6
Q
VBB
4
5
VEE
1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (623) 505-2414
www.azmicrotek.com
AZ10LVEL32
AZ100LVEL32
Absolute Maximum Ratings are those values beyond which device life may be impaired.
Symbol
VCC
VI
VEE
VI
IOUT
TA
TSTG
Characteristic
PECL Power Supply (VEE = 0V)
PECL Input Voltage
(VEE = 0V)
ECL Power Supply
(VCC = 0V)
ECL Input Voltage
(VCC = 0V)
Output Current
--- Continuous
--- Surge
Operating Temperature Range
Storage Temperature Range
Rating
0 to +6.0
0 to +6.0
-6.0 to 0
-6.0 to 0
50
100
-40 to +85
-65 to +150
Unit
Vdc
Vdc
Vdc
Vdc
mA
°C
°C
10K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND)
Symbol
VOH
VOL
VIH
VIL
IIH
IIL
VBB
IEE
1.
Characteristic
1
Min
-1080
-1950
-1230
-1950
-40°C
Typ
Max
-890
-1650
-890
-1500
150
Min
-1020
-1950
-1170
-1950
0°C
Typ
Output HIGH Voltage
Output LOW Voltage1
Input HIGH Voltage
Input LOW Voltage
Input HIGH Current
Input LOW Current
CLK, CLK
¯¯¯
-150
-150
RESET
0.5
0.5
Output Reference
-1430
-1300 -1380
Voltage
Power Supply Current
25
30
Each output is terminated through a 50Ω resistor to VCC – 2V.
Max
-840
-1630
-840
-1480
150
Min
-980
-1950
-1130
-1950
25°C
Typ
Max
-810
-1630
-810
-1480
150
-150
0.5
-1270
25
85°C
Typ
Max
-720
-1595
-720
-1445
150
-1250
25
-1310
30
Unit
mV
mV
mV
mV
μA
μA
-150
0.5
-1350
30
Min
-910
-1950
-1060
-1950
25
-1190
mV
30
mA
10K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V)
Symbol
VOH
VOL
VIH
VIL
IIH
IIL
VBB
IEE
1.
2.
Characteristic
Min
2220
1350
2070
1350
-40°C
Typ
Max
2410
1650
2410
1800
150
Min
2280
1350
2130
1350
0°C
Typ
Max
2460
1670
2460
1820
150
Min
2320
1350
2170
1350
Output HIGH Voltage1,2
Output LOW Voltage1,2
Input HIGH Voltage1
Input LOW Voltage1
Input HIGH Current
Input LOW Current
CLK, CLK
¯¯¯
-150
-150
-150
RESET
0.5
0.5
0.5
Output Reference
1870
2000
1920
2030
1950
Voltage1
Power Supply Current
25
30
25
30
For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value.
Each output is terminated through a 50Ω resistor to VCC – 2V.
25°C
Typ
Max
2490
1670
2490
1820
150
Min
2390
1350
2240
1350
85°C
Typ
Max
2580
1705
2580
1855
150
25
1990
30
mV
mV
mV
mV
μA
μA
-150
0.5
2050
Unit
25
2110
mV
30
mA
10K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol
VOH
VOL
VIH
VIL
IIH
IIL
VBB
IEE
1.
2.
Characteristic
1,2
Min
3920
3050
3770
3050
-40°C
Typ
Max
4110
3350
4110
3500
150
Min
3980
3050
3830
3050
0°C
Typ
Max
4160
3370
4160
3520
150
Min
4020
3050
3870
3050
Output HIGH Voltage
Output LOW Voltage1,2
Input HIGH Voltage1
Input LOW Voltage1
Input HIGH Current
Input LOW Current
CLK, CLK
¯¯¯
-150
-150
-150
RESET
0.5
0.5
0.5
Output Reference
3570
3700
3620
3730
3650
Voltage1
Power Supply Current
25
30
25
30
For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value.
Each output is terminated through a 50Ω resistor to VCC – 2V.
June 2009 * REV - 1
www.azmicrotek.com
2
25°C
Typ
Max
4190
3370
4190
3520
150
Min
4090
3050
3940
3050
85°C
Typ
Max
4280
3405
4280
3555
150
25
30
mV
mV
mV
mV
μA
μA
-150
0.5
3750
Unit
3690
25
3810
mV
30
mA
AZ10LVEL32
AZ100LVEL32
100K ECL DC Characteristics (VEE = -3.0V to -5.5V, VCC = GND)
Symbol
VOH
VOL
VIH
VIL
IIH
IIL
VBB
IEE
1.
Characteristic
Min
-1085
-1830
-1165
-1810
-40°C
Typ
-1005
-1695
Max
-880
-1555
-880
-1475
150
Min
-1025
-1810
-1165
-1810
Output HIGH Voltage1
Output LOW Voltage1
Input HIGH Voltage
Input LOW Voltage
Input HIGH Current
Input LOW Current
CLK, CLK
¯¯¯
-150
-150
RESET
0.5
0.5
Output Reference
-1380
-1260 -1380
Voltage
Power Supply Current
25
30
Each output is terminated through a 50Ω resistor to VCC – 2V.
0°C
Typ
-955
-1705
Max
-880
-1620
-880
-1475
150
Min
-1025
-1810
-1165
-1810
25°C
Typ
-955
-1705
Max
-880
-1620
-880
-1475
150
-150
0.5
-1260
25
85°C
Typ
-955
-1705
Max
-880
-1620
-880
-1475
150
-1260
25
-1380
30
Unit
mV
mV
mV
mV
μA
μA
-150
0.5
-1380
30
Min
-1025
-1810
-1165
-1810
29
-1260
mV
35
mA
100K LVPECL DC Characteristics (VEE = GND, VCC = +3.3V)
Symb
VOHol
VOL
VIH
VIL
IIH
IIL
VBB
IEE
1.
2.
Characteristic
1,2
Min
2215
1470
2135
1490
-40°C
Typ
2295
1605
Max
2420
1745
2420
1825
150
Min
2275
1490
2135
1490
0°C
Typ
2345
1595
Max
2420
1680
2420
1825
150
Min
2275
1490
2135
1490
Output HIGH Voltage
Output LOW Voltage1,2
Input HIGH Voltage1
Input LOW Voltage1
Input HIGH Current
Input LOW Current
CLK, CLK
¯¯¯
-150
-150
-150
RESET
0.5
0.5
0.5
Output Reference
1920
2040
1920
2040
1920
Voltage1
Power Supply Current
25
30
25
30
For supply voltages other that 3.3V, use the ECL table values and ADD supply voltage value.
Each output is terminated through a 50Ω resistor to VCC – 2V.
25°C
Typ
2345
1595
Max
2420
1680
2420
1825
150
Min
2275
1490
2135
1490
85°C
Typ
2345
1595
Max
2420
1680
2420
1825
150
25
1920
30
mV
mV
mV
mV
μA
μA
-150
0.5
2040
Unit
29
2040
mV
35
mA
100K PECL DC Characteristics (VEE = GND, VCC = +5.0V)
Symbol
VOH
VOL
VIH
VIL
IIH
IIL
VBB
IEE
1.
2.
Characteristic
1,2
Min
3915
3170
3835
3190
-40°C
Typ
3995
3305
Max
4120
3445
4120
3525
150
Min
3975
3190
3835
3190
0°C
Typ
4045
3295
Max
4120
3380
4120
3525
150
Min
3975
3190
3835
3190
Output HIGH Voltage
Output LOW Voltage1,2
Input HIGH Voltage1
Input LOW Voltage1
Input HIGH Current
Input LOW Current
CLK, CLK
¯¯¯
-150
-150
-150
RESET
0.5
0.5
0.5
Output Reference
3620
3740
3620
3740
3620
Voltage1
Power Supply Current
25
30
25
30
For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value.
Each output is terminated through a 50Ω resistor to VCC – 2V.
June 2009 * REV - 1
www.azmicrotek.com
3
25°C
Typ
4045
3295
Max
4120
3380
4120
3525
150
Min
3975
3190
3835
3190
85°C
Typ
4045
3295
Max
4120
3380
4120
3525
150
25
30
mV
mV
mV
mV
μA
μA
-150
0.5
3740
Unit
3620
29
3740
mV
35
mA
AZ10LVEL32
AZ100LVEL32
AC Characteristics (VEE = -3.0V to -5.5V; VCC = GND or VEE = GND; VCC = +3.0V to +5.5V)
Symbol
Characteristic
Min
-40°C
Typ
Max
Min
0°C
Typ
Max
Min
25°C
Typ
Max
Min
85°C
Typ
Max
Unit
Maximum Toggle
2.2
3.0
2.6
3.0
2.6
3.0
2.6
3.0
GHz
Frequency
Propagation Delay
tPLH/tPHL
CLK, CLK
¯¯¯ to Q/Q̄
360
450
540
370
460
550
380
470
560
400
490
580
ps
RESET to Q/Q̄
390
540
690
440
540
640
440
540
640
450
550
650
VPP (AC) Input Swing1
150
1000
150
1000
150
1000
150
1000
mV
VEE +
Common Mode Range2
VCC - VEE +
VCC VEE +
VCC - VEE +
VCC VCMR
VPP < 500 mv
1.2
0.4
1.1
0.4
1.1
0.4
1.1
0.4
V
VPP ≥ 500 mv
1.4
0.4
1.3
0.4
1.3
0.4
1.3
0.4
Output Rise/Fall Times
tr / t f
100
260
100
260
100
260
100
260
ps
Q/Q̄ (20% - 80%)
1.
VPP is the peak-to-peak differential input swing range for which AC parameters are guaranteed.
2.
VCMR is defined as the range within which the VIH level may vary, with the device still meeting the propagation delay specification. The VIL level must be
such that VPP is within the differential input swing range specified.
fmax
Figure 1: Timing Diagram
CLK
RESET
Q
June 2009 * REV - 1
www.azmicrotek.com
4
AZ10LVEL32
AZ100LVEL32
PACKAGE DIAGRAM
SOIC 8
NOTES:
1.
DIMENSIONS D AND E DO NOT
INCLUDE MOLD PROTRUSION.
2.
MAXIMUM MOLD PROTRUSION
FOR D IS 0.15mm.
3.
MAXIMUM MOLD PROTRUSION
FOR E IS 0.25mm.
June 2009 * REV - 1
DIM
A
A1
A2
A3
bp
c
D
E
e
HE
L
Lp
Q
v
w
y
Z
θ
www.azmicrotek.com
5
MILLIMETERS
MIN
MAX
1.75
0.10
0.25
1.25
1.45
0.25
0.36
0.49
0.19
0.25
4.8
5.0
3.8
4.0
1.27
5.80
6.20
1.05
0.40
1.00
0.60
0.70
0.25
0.25
0.10
0.30
0.70
8O
0O
INCHES
MIN
MAX
0.069
0.004
0.010
0.049
0.057
0.01
0.014
0.019
0.0075
0.0100
0.19
0.20
0.15
0.16
0.050
0.228
0.244
0.041
0.016
0.039
0.024
0.028
0.01
0.01
0.004
0.012
0.028
0O
8O
AZ10LVEL32
AZ100LVEL32
PACKAGE DIAGRAM
TSSOP 8
DIM
A
A1
A2
A3
bp
c
D
E
e
HE
L
Lp
v
w
y
Z
θ
NOTES:
1.
DIMENSIONS D AND E DO NOT
INCLUDE MOLD PROTRUSION.
2.
MAXIMUM MOLD PROTRUSION
FOR D IS 0.15mm.
3.
MAXIMUM MOLD PROTRUSION
FOR E IS 0.25mm.
June 2009 * REV - 1
www.azmicrotek.com
6
MILLIMETERS
MIN
MAX
1.10
0.05
0.15
0.80
0.95
0.25
0.25
0.45
0.15
0.28
2.90
3.10
2.90
3.10
0.65
4.70
5.10
0.94
0.40
0.70
0.10
0.10
0.10
0.35
0.70
6O
0O
AZ10LVEL32
AZ100LVEL32
PACKAGE DIAGRAM
MLP 8 2x2mm
Pin 1 Dot
By Marking
2.000±0.050
MLP 8
(2x2mm)
2.000±0.050
TOP VIEW
Pin 1 Identification
R0.100 TYP
0.350±0.050
0.250±0.050
0.500 bsc
8
1
7
6
2 1.200±0.050
exp. pad
3
5
4
0.600±0.050
exp. pad
BOTTOM VIEW
0.750±0.050
0.000-0.050
1
2
SIDE VIEW
Note: All dimensions are in mm
June 2009 * REV - 1
www.azmicrotek.com
7
3 4
0.203±0.025
1.750
Ref.
AZ10LVEL32
AZ100LVEL32
-
Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume
any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others.
Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or
for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may
occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify
and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages,
and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the
part.
June 2009 * REV - 1
www.azmicrotek.com
8
Similar pages