Source B-13-1250-TPM3-SST-60 1.25 gbps bi-directional single fiber transceiver Datasheet

1.25 Gbps Bi-directional Single Fiber Transceiver
B-13/15-1250(C)-TPM3-SXX-60
Features
• Coaxial single mode single fiber package with optional
SC/FC/ST/MU connector
• Wavelength Tx 1310 nm/ Rx 1550nm
• Compliant with IEEE 802.3z Gigabit Ethernet
• Single +3.3V Power Supply
• LVPECL Differential Inputs and Outputs
• LVPECL SD Output (B-13/15-1250-TPM3-SXX-60)
• LVTTL SD Output (B-13/15-1250C-TPM3-SXX-60)
• Wave Solderable and Aqueous washable
• Class 1 Laser Int. Safety Standad IEC 825 Compliant
• Uncooled laser diode with MQW structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• Temperature Range: 0 to 70ºC
• Optical Isolation >30 dB
• Cross Talk < -33 dB
• Optical Return Loss > 14dB
Absolute Maximum Rating
Parameter
Symbol
Min.
Max.
Unit
Power Supply Voltage
Vcc
0
3.6
V
Output Current
Iout
0
30
mA
Soldering Temperature
-
-
260
ºC
Operating Temperature
Topr
0
70
ºC
Storage Temperature
Tstg
-40
85
ºC
Note
10 seconds on leads only
Recommended Operating Condition
Parameter
Symbol
Min.
Typ.
Max.
Unit
Power Supply Voltage
Vcc
3.1
3.3
3.5
V
Operating Temperature (Case)
Topr
0
-
70
ºC
-
-
1250
-
Mbps
Data Rate
Transmitter Specifications
Parameter
Optical
Optical Transmit Power
Symbol
Min
Typical
Max
Unit
Notes
Po
-10
-
-4
dBm
Output power is coupled into a 9/125 µm single
mode fiber
λ
1260
1310
1360
nm
Output Spectrum Width
∆λ
-
-
3
nm
Extinction Ratio
ER
9
-
-
dB
ns
20% to 80% Values
Output center Wavelength
Output Eye
Compliant with IEEE 802.3z
Optical Rise Time
tr
Optical Fall Time
Optical Isolation
Optical Return Loss
Relative Intensity Noise
Total Jitter
LUMINENTOIC.COM
RMS (σ)
-
-
0.26
tf
-
-
0.26
ns
20% to 80% Values
-
30
-
-
dB
Tx:1310 nm/ Rx:1550 nm
-
14
-
-
dB
RIN
-
-
-120
dB/Hz
TJ
-
-
0.27
ns
Measured with 27-1 PRBS
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS589-AUG1804
rev. A.0
1.25 Gbps Bi-directional Single Fiber Transceiver
B-13/15-1250(C)-TPM3-SXX-60
Transmitter Specifications
Parameter
Electrical
Symbol
Min
Typical
Max
Unit
Power Supply Current
ICC
-
-
150
mA
Data Input Current-Low
IIL
-350
-
-
µA
Data Input Current-High
IIH
-
-
350
µA
Differential Input Voltage
VIH-VIL
300
-
-
mV
Data Input Voltage-Low
VIL-VCC
-2.0
-
-1.58
V
Data Input Voltage-High
VIH-VCC
-1.1
-
-0.74
V
Symbol
Min
Typical
Max
Unit
-
-
-
-22
dBm
Pin
-3
-
-
dBm
Notes
Maximum current is specified at Vcc=
Maximum @ maximum temperature
These inputs are compatible with 10K,
10KH and 100K ECL and PECL inputs
Receiver Specifications
Parameter
Optical
Sensitivity
Maximum Input Power
Notes
Measured with 27-1 PRBS, BER = 10-12
Signal Detect-Asserted
Pa
-
-
-22
dBm
Measured on transition: low to high
Signal Detect-Deasserted
Pd
-35
-
-
dBm
Measured on transition: high to low
-
3.0
-
dB
-
-
-33
dB
1500
-
1600
nm
Min
Typical
Max
Unit
Note
The current excludes the output load current
Signal Detect-Hysteresis
Cross Talk
-
Wavelength of Operation
Receiver Specifications
Parameter
Electrical
Symbol
Power Supply Current
Data Output Voltage-Low
ICC
-
-
100
mA
VOL -Vcc
-1.9
-
-1.6
V
Data Output Voltage-High
VOH- Vcc
-1.1
-
-0.8
V
Signal Detect Output Voltage-Low
VSDL-Vcc
VSDH- Vcc
VSDL
-1.9
-
-1.6
V
-1.1
-
-0.8
V
2
-
0.5
-
V
V
Signal Detect Output Voltage-High
Signal Detect Output Voltage-Low
Signal Detect Output Voltage-High
LUMINENTOIC.COM
VSDH
These outputs are compatible with 10K,
10KH and 100KECL and PECL outputs
B-15/13-1250-TDPM3-SXX-60
B-15/13-1250C-TDPM3-SXX-60
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS589-AUG1804
rev. A.0
1.25 Gbps Bi-directional Single Fiber Transceiver
B-13/15-1250(C)-TPM3-SXX-60
Connection Diagram
1. (Rx GND)
2. (Rx +)
3. (Rx-)
4. (SD)
5. (Rx Vcc)
6. (Tx Vcc)
7. (TX-)
8. (TX+)
9. (Tx GND)
NC
Top View
NC
Receiver Signal Ground
Receiver Data Out
Receiver Data Out Bar
Signal Detect
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
Transmitter Signal Ground
PIN
Symbol
Notes
1
RxGND
2
RD+
See recommended circuit schematic
3
RD-
See recommended circuit schematic
4
SD
Active high on this indicates a received optical signal
5
RxVcc
+3.3V dc power for the receiver section
6
TxVcc
+3.3V dc power for the transmitter section
Directly connect this pin to the receiver ground plane
7
TD-
See recommended circuit schematic
8
Warnings
TD+
See recommended circuit schematic
9
LUMINENTOIC.COM
TxGND
Directly connect this pin to the transmitter ground plane
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS589-AUG1804
rev. A.0
1.25 Gbps Bi-directional Single Fiber Transceiver
B-13/15-1250(C)-TPM3-SXX-60
Recommended Circuit Schematic
B-13/15-1250-TPM3-SXX-60
Tx Vcc
C5
Rx Vcc
9
R1
8
7
6
5
4 3
2
1
R3
R9
R5
C6
R7
TD +
RD +
TD -
RD -
Tx Vcc
SD
Rx Vcc
R2
R4
No internal
connection
No internal
connection
Transceiver
Top view
R10
R6
R8
L1
Vcc
Notes +3.3V:
R1=R3=R5=R7=R9=130!
R2=R4=R6=R8=R10=82!
C1=C2=C3=C5=C6=0.1"F
C4=10"F
L1=L2=1"H
Rx Vcc
C1
C3
L2
Tx Vcc
C2
C4
B-13/15-1250C-TPM3-SXX-60
Tx Vcc
C5
Rx Vcc
9
R1
8
7
6
5
4 3
2
1
R5
R3
C6
R7
TD +
RD +
TD -
RD -
Tx Vcc
SD
Rx Vcc
R2
R6
R4
No internal
connection
No internal
connection
Transceiver
Top view
R8
L1
Vcc
Notes +3.3V:
R1=R3=R5=R7=130!
R2=R4=R6=R8=82!
C1=C2=C3=C5=C6=0.1"F
C4=10"F
L1=L2=1"H
C3
Rx Vcc
C1
L2
C4
Tx Vcc
C2
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
LUMNDS589-AUG1804
rev. A.0
1.25 Gbps Bi-directional Single Fiber Transceiver
B-13/15-1250(C)-TPM3-SXX-60
Package Diagram
B-13/15-1250(C)-TPM3-SXX -60
Diplexer Transceiver Assembly
Top View
Front View
max
Side View
Rear View
Units in mm (inch)
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
5
LUMNDS589-AUG1804
rev. A.0
1.25 Gbps Bi-directional Single Fiber Transceiver
B-13/15-1250(C)-TPM3-SXX-60
Ordering Information
Available Options:
B-13/15-1250(C)-TPM3-SSC-60
B-13/15-1250(C)-TPM3-SST-60
B-13/15-1250(C)-TPM3-SFC-60
B-13/15-1250(C)-TPM3-SMU-60
B - 13/15 - 1250(C) - TPM3 - S XX -60
• Wavelength
Tx Wavelength=1310nm
Rx Wavelength=1550nm
• Communication protocol
(1250 Mbps)
1250=LVPECL Signal Detection Output
1250C=LVTTL Signal Detection Output
• +3.3 V Transceiver
• Single mode fiber
• Connector options
(SC/ST/FC/MU)
• Length of Pigtail Fiber
= 660 ± 20 mm
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance
of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are
given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of
Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual
property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes
no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact
LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2003
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
6
LUMNDS589-AUG1804
rev. A.0
Similar pages