Source B-15-13-622-TDFB-SSC 622 mbps bi-directional single fiber transceiver Datasheet

622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Features
• Coaxial Single Mode Single Fiber Package with
SC Receptacle Connector
• Tx 1310 nm/Rx 1550 nm [B-13/15-622-TDFB(3)-SSCX]
• Tx 1550 nm/Rx 1310 nm [B-15/13-622-TDFB(3)-SSCX]
• SONET OC-12 SDH STM-4 Compliant
• Single +5V/+3.3V Power Supply
• PECL Differential Inputs and Outputs
• Wave Solderable and Aqueous Washable
• Class 1 Laser Int. Safety Standard IEC 825 Compliant
• Uncooled Laser Diode with MQW Structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• Temperature Range: 0 to 70 ºC
• Optical Isolation > 30 dB
• Cross Talk < -33 dB
• Optical Return Loss >14 dB
Absolute Maximum Rating
Parameter
Symbol
Min.
Max.
Unit
Note
Power Supply Voltage
Vcc
0
3.6
V
B-1X/1X-622-TDFB3-SSCX
Power Supply Voltage
Vcc
0
6
V
B-1X/1X-622-TDFB-SSCX
Output Current
Iout
0
30
mA
Soldering Temperature
-
-
260
ºC
Operating Temperature
Topr
0
70
ºC
Storage Temperature
Tstg
-40
85
ºC
10 seconds on leads only
Recommended Operating Condition
Parameter
Symbol
Min.
Typ.
Max.
Unit
Power Supply Voltage
Vcc
3.1
3.3
3.5
V
Power Supply Voltage
Vcc
4.75
5
5.25
V
Operating Temperature
Topr
0
-
70
ºC
-
622
-
Mbps
Data Rate
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS795-NOV0104
rev. A.0
622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical Transmit Power
Po
-15
Optical Transmit Power
Output Center Wavelength
Po
-3
-
-8
dBm
B-1X/1X-622-TDFB(3)-SSC
-
+2
dBm
λ
B-1X/1X-622-TDFB(3)-SSC4
1260
1310
1360
nm
B-13/15-622-TDFB(3)-SSCX
λ
1480
1550
1580
nm
B-15/13-622-TDFB(3)-SSCX
∆λ
-
-
1
nm
-20dB width
Optical
Output Center Wavelength
Output Spectrum Width
Side Mode Supression Ratio
SMSR
30
-
-
dB
Extinction Ratio
ER
8.2
-
-
dB
B-1X/1X-622-TDFB(3)-SSC
Extinction Ratio
ER
10
-
-
dB
B-1X/1X-622-TDFB(3)-SSC4
Output Eye
Compliant with Bellcore GR-253-CORE and ITU recommendation G957
Optical Rise Time
tr
-
-
1.2
ns
10% to 90% Values
Optical Fall Time
tf
-
-
1.2
ns
10% to 90% Values
Optical Return Loss
14
-
-
dB
RIN
-
-
-120
dB/Hz
TJ
-
-
0.55
ns
Measured with 223-1 PRBS with 72 ones and
72 zeros.
Symbol
Min
Typical
Max
Unit
Notes
Power Supply Current
ICC
-
-
140
mA
Data Input Current-Low
IIL
-350
-
-
µA
Data Input Current-High
IIH
-
-
350
µA
Differential Input Voltage
VIH-VIL
300
-
-
mV
Data Input Voltage-Low
VIL-VCC
-2.0
-
-1.58
V
Data Input Voltage-High
VIH-VCC
-1.1
-
-0.74
V
Relative Intensity Noise
Total Jitter
Transmitter Specifications
Parameter
Electrical
LUMINENTOIC.COM
Maximum current is specified at
Vcc= Maximum @ maximum temperature
These inputs are compatible with 10K, 10KH
and 100K ECL and PECL inputs
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS795-NOV0104
rev. A.0
622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
-
-
-
-28
dBm
Maximum Input Power
Pin
-3
-
-
dBm
Signal Detect-Asserted
Pa
-
-
-28
dBm
Measured on transition: low to high
Signal Detect-Deasserted
Pd
-40
-
-
dBm
Measured on transition: high to low
-
3.0
-
dB
-
-
-33
dB
Wavelength of Operation
1260
-
1360
nm
B-15/13-622-TDFB(3)-SSCX
Wavelength of Operation
1480
-
1600
nm
B-13/15-622-TDFB(3)-SSCX
Min
Typical
Max
Unit
Notes
The current excludes the output load current
Optical
Sensitivity
Signal Detect-Hysteresis
Cross Talk
-
Measured with 223-1 PRBS with 72 ones and
72 zeros. (ITU-T recommendation G.958)
Receiver Specifications
Parameter
Symbol
Electrical
ICC
-
-
100
mA
Data Output Voltage-Low
VOL -Vcc
-1.9
-
-1.6
V
Data Output Voltage-High
VOH- Vcc
-1.1
-
-0.8
V
Signal Detect Output Voltage-Low
VSDL-Vcc
-1.9
-
-1.6
V
Signal Detect Output Voltage-High
VSDH- Vcc
-1.1
-
-0.8
V
Power Supply Current
LUMINENTOIC.COM
These outputs are compatible with 10K,
10KH and 100KECL and PECL outputs.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS795-NOV0104
rev. A.0
622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Connection Diagram
1. (Rx GND)
2. (Rx +)
3. (Rx-)
4. (SD)
5. (Rx Vcc)
6. (Tx Vcc)
7. (TD-)
8. (TD+)
9. (Tx GND)
NC
Top View
NC
Receiver Signal Ground
Receiver Data Out
Receiver Data Out Bar
Signal Detect
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
Transmitter Signal Ground
PIN
Symbol
Notes
1
RxGND
Directly connect this pin to the receiver ground plane
2
RD+
See recommended circuit schematic
3
RD-
See recommended circuit schematic
4
SD
Active high on this indicates a received optical signal
5
RxVcc
+3.3V/+5V dc power for the receiver section
6
TxVcc
+3.3V/+5V dc power for the transmitter section
7
TD-
See recommended circuit schematic
TD+
See recommended circuit schematic
8
Warnings
9
TxGND
Directly connect this pin to the transmitter ground plane
Legal Notice
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
LUMNDS795-NOV0104
rev. A.0
622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Recommended Circuit Schematic
Tx Vcc
C5
Rx Vcc
9
R1
7
8
6 5
4 3
2
1
R3
R9
R5
C6
R7
TD +
RD +
TD -
RD -
Tx Vcc
SD
Rx Vcc
R2
R4
No internal
connection
Notes +3.3V:
R1=R3=R5=R7=R9=130!
R2=R4=R6=R8=R10=82!
C1=C2=C3=C5=C6=0.1"F
C4=10"F
L1=L2=1"H
No internal
connection
Transceiver
Top view
R10
R6
R8
L1
Notes +5V:
R1=R3=R5=R7=R9=82!
R2=R4=R6=R8=R10=130!
C1=C2=C3=C5=C6=0.1"F
C4=10"F
L1=L2=1"H
Vcc
C3
Rx Vcc
C1
L2
C4
Tx Vcc
C2
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
5
LUMNDS795-NOV0104
rev. A.0
622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Package Diagram
Diplexer Transceiver Assembly (Receptacle Type)
Top View
Front View
Units: mm
Rear View
Side View
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
6
LUMNDS795-NOV0104
rev. A.0
622 Mbps Bi-directional Single Fiber Transceiver
B-1X/1X-622-TDFB(3)-SSCX
Ordering Information
Available Options:
B-15/13-622-TDFB-SSC
B-15/13-622-TDFB3-SSC
B-15/13-622-TDFB-SSC4
B-15/13-622-TDFB3-SSC4
B-13/15-622-TDFB-SSC4
B-13/15-622-TDFB3-SSC4
B - 1X/1X - 622 - TDFB(3) - S SC
Tx power
• Wavelength
13/15 = Tx 1310 nm/Rx 1550 nm
15/13 = Tx 1550 nm/Rx 1310 nm
• Communication protocol
(622 Mbps)
• TDFB= +5V Transceiver
TDFB3= +3.3V Transceiver
• Single mode fiber
• Connector options
• Tx power range
blank = -15 to -8 dBm
4 = -3 to +2 dBm
Warnings:
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notes:
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance
of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are
given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of
Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual
property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes
no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact
LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2003
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
7
LUMNDS795-NOV0104
rev. A.0
Similar pages