Microdc B0515XS-W5 0.5watt sip4 singleoutputdc/dc-converter Datasheet

B-XS-W5 Series
0.5 Watt SIP4 Single Output DC/DC-Converter
SELECTION GUIDE
Model
Input
Voltage
(V)
Output
Voltage
(V)
Output Current
(MA)
Efficiency
(%)
Max.
Capacitive
Load
B0505XS-W5
5
5
100
80
470μF
FEATURES
B1205XS-W5
12
5
100
82
470μF
◆Industry Standard Pinout
B0512XS-W5
5
12
42
83
150μF
◆1kVDC Isolation
B1212XS-W5
12
12
42
86
150μF
◆UL94V-0 Package Material
B0515XS-W5
5
15
33
84
150μF
◆Optional Continuous Short Circuit Protected
B1215XS-W5
12
15
33
87
150μF
◆Fully Encapsulated
◆Custom Solutions Available
Specifications
◆Efficiency to 87%
Input Voltage Range
◆3 year Warranty
±10%
Output Voltage Accuracy
MODEL SELECTION
B①05②05③X④ S⑤-W5⑥
①Product Series
③Output Voltage
⑤SIP Package
②Input Voltage
④Fixed Input
⑥Rated Power
±5%
Line Voltage Regulation
1.2%/1% of Vin typ..
Load Voltage Regulation (10% to 100% full load)
10% max. / 4% typ..
Output Ripple and Noise (20MHz limited)
100mVp-p max.
Operating Frequency
20kHz min. / 54kHz typ.
Efficiency at Full Load
70% min. / 85% typ.
Efficiency at 50%l Load
65% min. / 80% typ.
Minimum Load = 0%
Specifications valid for 10% minimum load only.
Isolation Voltage
(tested for 1 second)
APPLICATIONS
1000VDC
(rated for 1 minute)
The B-XS-W5 DC/DC converters are typically
Isolation Capacitance
used in general purpose low power isolation
Isolation Resistance
and voltage matching applications, and feature
Short Circuit Protection
a full industrial operating temperature range of
Suffix "P"
-40℃~ +85℃ without derating.
Operating Temperature Range (free air convection)
500VAC / 60Hz
20pF min. / 75pF max.
10 GΩmin.
1 Second
Continuous
-40°C to +85°C (see Graph)
Storage Temperature Range
Derating-Graph(Ambient Temperature)
-55°C to +125°C
Relative Humidity
95% RH
Package Weight
1.4g
Packing Quantity
42 pcs per Tube
MTBF (+25°C)
(+85°C)
}
using MIL-HDBK 217F
985 x 103hours
using MIL-HDBK 217F
200 x 103hours
Detailed Information see
Application Notes chapter
"MTBF"
℃, nominal input voltage, full load and after warm-up )
(measured at TA= 25
25℃
add “P” for Continuous Short Circuit Protection,e.g.:B0505XS-W5
P
Protection,e.g.:B0505XS-W5P
MICRODC reserves the copyright
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
B-XS-W5 Series
Typical Characteristics
Notes
Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter .
Certifications
Package Style and Pinning (mm)
RoHS COMPLIANT INFORMATION
Microdc Professional Power Module,Inc.
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C
Tel:0086-20-86000646 E-mail:[email protected]
for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte
Website:http://www.microdc.cn
Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are
Microdc Professional Power module,Inc.makes no representation that
backward compatible with Sn/Pb soldering systems.
the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or
REACH COMPLIANT INFORMATION
future patent rights. Specifications are subject to change without notice.
This series has proven that this product does not contain harmful chemicals, it also has harmful chemical
©2010 Microdc Professional Power Module, Inc. Guangzhou
substances through the registration, inspection and approval.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2
Similar pages