Coilcraft B09TJLC Mini spring air core inductor Datasheet

Document 107-1
Mini Spring™ Air Core Inductors
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost.
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +140°C with derated current
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging A0xT: 700/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.32 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth
BxxT: 500/7″ reel; 2200/13″ reel Plastic tape: 16 mm wide,
0.28 mm thick, 8 mm pocket spacing, 3.4 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other
solvents, see Doc787_PCB_Washing.pdf
SRF
DCR
Part
L2 Percent Q4
min5
max6 Irms7 Weight
1
3
number Turns (nH)
tol
min (GHz) (mOhm) (A)
(mg)
A01TKL_
1
2.5 10
145 12.5
1.1
4
31
A02T_L_
2
5.0 5,2,1 140
6.5
1.8
4
42
A03T_L_
3
8.0 5,2,1 140
5.0
2.6
4
52
A04T_L_
4
12.5 5,2,1 137
3.3
3.4
4
65
A05T_L_
5
18.5 5,2,1 132
2.5
3.9
4
78
B06T_L_
6
17.5 5,2,1 100
2.2
4.5
4
100
B07T_L_
7
22.0 5,2,1 102
2.1
5.2
4
110
B08T_L_
8
28.0 5,2,1 105
1.8
6.0
4
118
B09T_L_
9
35.5 5,2,1 112
1.5
6.8
4
133
B10T_L_
10
43.0 5,2,1 106
1.2
7.9
4
147
1. When ordering, please specify tolerance, termination and packaging codes:
A02TGLC
F = 1% G = 2% J = 5% K = 10% (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape,
700 (AxxT) or 500 (BxxT) parts per full reel.
B = Less than full reel. In tape, but not machine-ready. To have
a leader and trailer added ($25 charge), use code letter C
instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked, 2500 (AxxT) or 2200 (BxxT)
parts per full reel.
2. Inductance measured at 150 MHz with an Agilent/HP 4286 or equivalent, a
Coilcraft SMD-A and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 150 MHz using an Agilent/HP 4291A with an Agilent/HP 16193A
test fixture or equivalents.
5. SRF tested on an Agilent/HP 8720D or equivalent and a Coilcraft SMD-D fixture.
6. DCR tested on the Cambridge Technology Model Micro-ohmmeter or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Tolerance:
Dimensions are in
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
inches
mm
Document 107-1
Revised 10/03/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 107-2
Designer’s Kit C302 contains 12 each of all 5% values
Designer’s Kit C302-2 contains 12 each of all 2% values
Mini Spring™ Air Core Inductors
Typical L vs Frequency
25
60
43.0 nH
55
50
18.5 nH
Inductance (nH)
Inductance (nH)
20
15
12.5 nH
10
8.0 nH
5.0 nH
5
100
35.5 nH
40
35
28.0 nH
30
22.0 nH
25
20
2.5 nH
0
45
17.5 nH
15
200
400
600
10
1000
100
Frequency (MHz)
200
400
600
1000
Frequency (MHz)
Typical Q vs Frequency
135
220
130
2.5 nH
200
125
190
120
5.0 nH
180
170
8.0 nH
160
Q factor
Q factor
210
17.5 nH
22.0 nH
115
28.0 nH
35.5 nH
110
105
12.5 nH
43.0 nH
100
150
140
95
18.5 nH
130
100
200
400
600
1000
90
100
Frequency (MHz)
200
400
600
1000
Frequency (MHz)
Typical Irms Derating
120
110
90
80
70
60
50
40
30
25°C
Percent of rated Irms
100
20
10
0
-40
-20
0
20
40
60
80
100
120 140
Ambient temperature (°C)
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 107-2
Revised 10/03/11
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages