Crimp EH CONNECTOR Radial Tape Disconnectable Crimp style connectors 2.5mm (.098") pitch Features –––––––––––––––––––––––– • Compact and slim This connector is designed to be compact and unusually thin. It measures only 8.1mm (.319") high after mounting and is just 3.8mm (.150") wide. • Highly reliable contact The contact has long dimples near the center that ensure continuity of low voltage and low current circuits at all times, even under conditions of vibration and abusive prying. • Polarizing guides The header and housing have guides to prevent improper mating. • Whisker prevention The contact material is treated with a reflow process, and the square post is copper-undercoated and tin/lead-plated for This, the thinnest, 2.5mm (.098") pitch connector, is 8.1mm (.319") in height after mounting and 3.8mm (.150") in width. It is designed to meet the demand for the highdensity connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. whisker prevention. • Easy and effective crimping Although the contact is compact, it has a long wire strip length, 2.6±0.4mm (.102"±.016"). This long length is very useful for automatic crimping and when crimping shielded wires. 2 3 4 5 B JST Specifications ––––––––––––––––––– • Current rating: 3A AC, DC (AWG#22) • Voltage rating: 250V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 800V AC/minute • Applicable wire: AWG #32 to #22 • Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063") * Contact JST for details. Standards –––––––––––––––––––––– 0 1 2 Recognized E60389 Certified LR20812 R75089 51 EH CONNECTOR Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Model No. 5.7(.224) 2.85(.112) 2.05(.081) 1.1(.039) Applicable wire Q'ty / AWG # Insulation O.D. mm(in.) reel mm2 SEH-001T-P0.6 0.05 to 0.3 30 to 22 1.0 to 1.9(.039 to .075) SEH-003T-P0.6L 0.032 to 0.08 32 to 28 0.5 to 1.1(.020 to .043) 10,000 2.0(.079) Material and Finish Phosphor bronze, tin-plated Note: 1. Contact JST for gold-plated contacts. 2. SEH-003T-P0.6L is not TÜV approved. 1.6(.063) Housing ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Circuits 3 6 3.8(.150) 7 6.5(.256) 2 JST 1 0.6 (.024) 2.25 (.089) 2.5(.098) B A Circuit No.1 0.7 (.028) Model No. Dimensions mm(in.) A B Q'ty / bag 2 EHR- 2 2.5( .098) 7.0( .276) 1,000 3 EHR- 3 5.0( .197) 9.5( .374) 1,000 4 EHR- 4 7.5( .295) 12.0( .472) 1,000 5 EHR- 5 10.0( .394) 14.5( .571) 1,000 6 EHR- 6 12.5( .492) 17.0( .669) 1,000 7 EHR- 7 15.0( .591) 19.5( .768) 1,000 8 EHR- 8 17.5( .689) 22.0( .866) 1,000 9 EHR- 9 20.0( .787) 24.5( .965) 1,000 10 EHR-10 22.5( .866) 27.0(1.063) 1,000 11 EHR-11 25.0( .984) 29.5(1.161) 1,000 12 EHR-12 27.5(1.083) 32.0(1.260) 1,000 13 EHR-13 30.0(1.181) 34.5(1.358) 1,000 14 EHR-14 32.5(1.280) 37.0(1.457) 1,000 15 EHR-15 35.0(1.378) 39.5(1.555) 1,000 Material Nylon 66, UL94V-0, natural (white) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 52 EHR-2-o o(blank)…natural (white) K…black R…red TR…tomato red E…blue Y…yellow L…lemon yellow M…green O…orange N…brown PL…purple PK…pink H…gray LE…light blue FY…vivid yellow EH CONNECTOR Shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors. Model No. Side entry type A 2 B 2B-EH-A S 2B-EH 2.5( .098) 3 B 3B-EH-A S 3B-EH 5.0( .197) 4 B 4B-EH-A S 4B-EH 7.5( .295) 5 B 5B-EH-A S 5B-EH 6 B 6B-EH-A 7 B 3.8(.150) 0.64 (.025) 2.5(.098) A 1.6(.063) Circuit No.1 (3 to 15 circuits) Top entry type Side entry type 7.5( .295) 1,000 1,000 10.0( .394) 1,000 1,000 12.5( .492) 1,000 1,000 10.0( .394) 15.0( .591) 1,000 1,000 S 6B-EH 12.5( .492) 17.5( .689) 1,000 500 B 7B-EH-A S 7B-EH 15.0( .591) 20.0( .787) 1,000 500 8 B 8B-EH-A S 8B-EH 17.5( .689) 22.5( .886) 500 500 9 B 9B-EH-A S 9B-EH 20.0( .787) 25.0( .984) 500 500 10 B10B-EH-A S10B-EH 22.5( .866) 27.5(1.083) 500 500 11 B11B-EH-A S11B-EH 25.0( .984) 30.0(1.181) 500 250 12 B12B-EH-A S12B-EH 27.5(1.083) 32.5(1.280) 500 250 13 B13B-EH-A S13B-EH 30.0(1.181) 35.0(1.378) 250 250 14 B14B-EH-A S14B-EH 32.5(1.280) 37.5(1.476) 250 250 15 B15B-EH-A S15B-EH 35.0(1.378) 40.0(1.575) 250 250 3.2(.126) 5.1(.201) 6.0(.236) 3.3(.130) 3.8(.150) Circuit No.1 2.5 2.5 (.098) (.098) Q'ty / box Dimensions mm.(in) Top entry type 6.0(.236) 3.3(.130) Circuits 3.2(.126) Top entry type (2 circuits) B Material and Finish Post: Brass, copper-undercoated, tin/lead plated Wafer: Nylon 66, UL94V-0, natural (white) 0.64 (.025) 1.6(.063) Note: 1. Also available and identified as model BxxB-EH is a top entry type having a post extension length of 4.0mm(.157") 2. Top entry type headers are not TÜV approved. A B <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. Side entry type 4.2(.165) Circuit No.1 2.5 (.098) 2.5 (.098) 0.64 (.025) 6.7(.264) 6.0(.236) 2.2 (.087) 5.2(.205) 4.0(.157) <Top entry type> ex. B2B-EH-A-o o(blank)…natural (white) K…black R…red E…blue Y…yellow M…green <Side entry type> 3.2 (.126) A B ex. S2B-EH-o o(blank)…natural (white) K…black R…red TR…tomato red E…blue Y…yellow L…lemon yellow M…green O…orange N…brown P…purple PK…pink H…gray LE…light blue FY…vivid yellow PC board layout (viewed from soldering side) and Assembly layout ––––––––––––––––––– Side entry type 1.9 (.074)min. 6.7 (.264)min. 2.5±0.05 (.098±.002) 0.9 + 00.1 (.035 +.004 0 )dia. 10.3(.406) 8.2(.323) 4.2 (.165) 0.9 + 00.1 (.035 +.004 0 )dia. 3.8 (.150) 7.5(.295) 2.2 (.087)min. 2.5±0.05 2.5 (.098±.002) (.098)min. 0.6(.024) Top entry type Note: 1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR-4 are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 53 EH CONNECTOR Shrouded header on radial-tape ––––––––––––––––––––––––––––––––––––––––––––– <Taping specifications conform to EIAJ-RC-1008B and JIS C0805.> •The shrouded headers are interchangeable with those of the HR crimp style and insulation displacement connectors . •Shrouded headers on radial-tape are not TÜV approved. TS type (2 circuits) 4.4 (.173) 2.2(.087) 5.4(.213) [1.0(.039)] 6.5 1.5(.059) (.255) 7.5(.295) 2.5(.098) 0.64(.025) dia. Dimensions mm(in.) Circuits Model No. 2 B2B-EH-TS - - 1,400 3 B3B-EH-TS 5.0(.197) 10.0(.394) 1,400 4 B4B-EH-TS 7.5(.295) 12.5(.492) 700 5 B5B-EH-TS 10.0(.394) 15.0(.591) 700 6 B6B-EH-TS 12.5(.492) 17.5(.689) 700 7 B7B-EH-TS 15.0(.591) 20.0(.787) 700 8 B8B-EH-TS 17.5(.689) 22.5(.886) 700 A B Q'ty / box Material and Finish Pin: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. (3 to 8 circuits) B A 0.64(.025) dia. 5.6(.220) 4.4 (.173) 2.2(.087) [1.0(.039)] 1.5(.059) 2.8(.110) 6.5(.256) 2.5(.098) 2.5(.098) 0.64(.025) dia. TV4 type B A 0.64(.025) 54 5.6(.220) 4.4 (.173) 2.2(.087) 2.8(.110) 6.5(.256) 2.5(.098) 2.5(.098) B2B-EH-TS-o o(blank)…natural (white) K…black R…red E…blue Y…yellow M…green N…brown [0.7(.028) dia.] [0.7(.028) dia.] Dimensions mm(in.) Circuits Model No. 3 B3B-EH-TV4 5.0(.197) 10.0(.394) 1,400 4 B4B-EH-TV4 7.5(.295) 12.5(.492) 700 5 B5B-EH-TV4 10.0(.394) 15.0(.591) 700 6 B6B-EH-TV4 12.5(.492) 17.5(.689) 700 7 B7B-EH-TV4 15.0(.591) 20.0(.787) 700 8 B8B-EH-TV4 17.5(.689) 22.5(.886) 700 A B Material and Finish Post: Brass, copper-undercoated, tin/lead-plated Wafer: Nylon 66, UL94V-0, natural (white) Q'ty / box EH CONNECTOR Taping specifications –––––––––––––––––––––––––––––––––––––––––––––––––––––– 2circuits: 5.1(.201) 3 to 8 circuits: 3.85(.152) 6.0 (.236) 18.0(.709) 20.0(.787) 9.0(.354) 2 and 3 circuits: 12.7(.500) 4 to 8 circuits: 25.4(1.000) 4.0 (.157)dia. 2circuits: 2.5(.098) 3 to 8 circuits: 5.0(.197) 12.7(.500) Note: Conforms to JIS C0825. Packaging specifications ––––––––––––––––––––––––––––––––––––––––––––––––––– D Distance between the end of the tape and the first connector's center line (either end) Tail tape H Lead tape TERMIN ALS & CONN ECTORS R W Package type Flat pack (zigzag folded) Distance between folds 24 indexing holes per fold (304.8mm/12") Box size (316x45x330mm)12.4"(W)x1.8"(D) x13.0"(H) Distance between the end of the tape and the first connector´s center line (either end) 19.05mm(.750") PC board layout (viewed from soldering side) and Assembly layout ––––––––––––––––––– 0.9 + 00.1 (.035 +0.004 )dia. 4.4 (.173) 6.5(.256) 8.6(.339) 2.2 (.087)min. 2.5±0.05 2.5 (.098±.002) (.098)min. Note: 1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers. 2. Hole dimension differ according to the kind of PC board and piercing method. If PC boards made of hard material such as FR-4 are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. 55 EH CONNECTOR Applicator for the semi-automatic press AP-K2N ––––––––––––––––––––––––––––––– Contact SEH-001T-P0.6 SEH-003T-P0.6L 56 Crimp applicator MKS-L(-10) with safety cover without safety cover Compact crimp applicator MKS-LS with safety cover without safety cover Strip-crimp applicator MKS-SC with safety cover APLMK SEH001-06 APLNC SEH001-06 APLMKLS SEH001-06 APLLSNC SEH001-06 APLSC SEH001-06 APLMK SEH003-06 APLNC SEH003-06 – – APLSC SEH003-06