NKK B1RKV Process sealed subminiature antistatic toggle Datasheet

Process Sealed Subminiature Antistatic Toggles
Series B
Distinctive Characteristics
Subminiature size saves space on PC boards.
Specifically developed for logic-level applications.
Antistatic superstructure, consisting of the carbon impregnated
bushing and the support bracket, prevents static discharge
to the contacts. Static electricity from an operator’s touch
travels from actuator through the bushing and bracket to
the PC board.
Locking lever mechanism offered as a toggle option.
Optional threaded, 6mm diameter bushing for
panel seal mounting meets IP65 of IEC60529
specifications (similar to NEMA 4 and 13).
Totally sealed body construction prevents
contact contamination and allows timeand money-saving soldering and cleaning.
Epoxy sealed terminals lock out flux and
other contaminants.
Award-winning STC contact mechanism with
benefits unavailable in conventional mechanisms:
smoother, positive detent actuation, increased contact
stability and unparalleled logic-level reliability. (Additional
STC details in Terms & Acronyms; see Supplement section.)
.100” x .100” (2.54mm x 2.54mm) terminal spacing
conforms to standard PC board grid spacing.
Illuminated toggles available and shown in the Illuminated
Other section.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
Series B
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Angle of Throw:
Materials & Finishes
Toggle:
Bushing:
Gasket:
Case Housing:
Support Bracket:
Movable Contact:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
Installation
Mounting Torque:
PCB Processing
Soldering:
Cleaning:
Standards & Certifications
Flammability Standards:
UL Recognition
or CSA Certification:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
50,000 operations minimum for locking lever models
50,000 operations minimum
Toggles A, A1, E & K with Long Paddle: 1.47N (momentary); 1.18N (maintained)
Toggles J & H & K with Short Paddle: 2.72N (momentary); 1.84N (maintained)
Toggle L: 0.59N
Nonshorting (break-before-make)
26°
Nickel plated brass
Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing
Nitrile butadiene rubber
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Copper alloy with gold plating
Copper alloy with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
.30 ~ .45Nm (2.65 ~ 3.98 lb • in) for A1 actuator with threaded bushing only
Wave Soldering Recommended: See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
UL94V-0 available
The B Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
Series B
TYPICAL SWITCH ORDERING EXAMPLE
1
B
2
A
B
PC TERMINALS
POLES
1
SPDT
P
2
DPDT
*B
Straight with Bracket
*H
Right Angle with Bracket
*V
Vertical with Bracket
W
Straight
Straight Long
* Bracketed models are ESD protected
CIRCUITS
2
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
*R
(ON)
NONE
ON
8
(ON)
OFF
(ON)
9
ON
OFF
(ON)
*S
(ON)
OFF
ON
NONE
ON
OPTIONAL CAPS
TOGGLES
A
A1
.394” (10.0mm) Bat
G
.394” (10.0mm) Bat Lever Cap
.315” (8.0mm) Bat with
Panel Seal Threaded Bushing
(Straight PC only)
J
.248” (6.3mm) Bat Lever Cap
J
.248” (6.3mm) Bat
( ) = Momentary
E
.394” (10.0mm) Flatted
* Reverse circuits R & S
available with right angle
& vertical only
H
.248” (6.3mm) Flatted
K
Snap Top for A or B Paddle
L
Locking Lever
(with Circuits 2 & 3 only)
PADDLES
A
Short Paddle for K Toggle
B
Long Paddle for K Toggle
CAP
COLORS
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
B12AB
.394” (10.0mm)
Bat Toggle
Straight PC Terminals
with Bracket
PADDLE
COLORS
A
Black
A
B
White
B
C
Red
C
---
Yellow
E
---
Green
F
---
Blue
G
---
Gray
H
SPDT
ON-NONE-ON Circuit
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series B
Process Sealed Subminiature Antistatic Toggles
POLES & CIRCUITS
Toggle Position
( ) = Momentary
Up
Center
Connected Terminals
Down
Throw & Schematics
Up
Center
Down
Note:
Pole
Model
SP
B12
B13
B15
B1R
B18
B19
B1S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
2-3
OPEN
2-1
SPDT
DP
B22
B23
B25
B2R
B28
B29
B2S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
2-3 5-6
OPEN
2-1 5-4
DPDT
Slot
Slot
Terminal numbers are
not actually on the switch.
2 (COM)
3
1
2
3
5
(COM)
1
6
4
TOGGLES
Standard Material & Finish: Brass with Bright Nickel
A
.394” (10.0mm)
Bat
A1
.315” (8.0mm) Bat with
Panel Seal Threaded Bushing
26°
(8.0)
.315
(6.3)
.248
K
.248” (6.3mm) Flatted
.394” (10.0mm)
Flatted
E
Snap Top for Paddles
(2.7)
.106
(1.6)
.063
26°
(2.6) Dia
.102
(10.0)
.394
.248” (6.3mm)
Bat
26°
26°
(2.6) Dia
.102
H
J
(2.6) Dia
.102
(10.0)
.394
L
Locking Lever
26°
26°
(1.6)
.063
(6.3)
.248
26°
(2.6)
.102
(2.5)
.098
(12.5)
.492
(5.0)
.197
(5.9)
.232
(4.5) Dia
.177
(5.1) Dia
.201
(11.5)
.453
(5.8)
.228
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series B
Process Sealed Subminiature Antistatic Toggles
PC TERMINALS
Use of a support bracket is recommended to increase PCB mounting strength and stability.
P
B
Straight
H
Straight with Bracket
Right Angle with Bracket
(10.16)
.400
(2.54) Typ
.100
(5.08)
.200
(5.08)
.200
(5.08)
.200
(0.6) Typ
.024
(0.6) Dia Typ
.024
(3.1) Typ
.122
V
(2.54) Typ
.100
(0.6) Dia Typ
.024
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.4) Typ
.016
(2.54) Typ
.100
(0.6)
.024 (0.4)
.016
(0.5) Typ
.020
(3.1)
.122
W
Vertical with Bracket
Straight Long
(0.5) Typ
.020
(0.6) Dia Typ
.024
(2.54) Typ
.100
(0.6) Dia Typ
.024
(5.08)
.200
(18.9)
.744
(2.54) Typ
.100
(0.6)
.024
(0.4)
.016
OPTIONAL CAPS
G
AT4003
.394” (10.0mm) Bat Lever Cap
J
AT4064
.248” (6.3mm) Bat Lever Cap
26°
(3.0) Dia
.118
Material: PVC
Colors Available:
A, B, C
(11.0)
.433
26°
(3.0) Dia
.118
Material: PVC
Colors Available:
A, B, C
(10.0)
.394
(7.0)
.276
(6.3)
.248
PADDLES
A
AT467
Short Paddle for K Toggle
B
AT468
Long Paddle for K Toggle
26°
(4.6)
.181
26°
(2.4)
.094
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(5.0)
.197
(15.1)
.594
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(9.4)
.370
(10.3)
.406
(4.4)
.173
(2.4)
.094
(5.0) Dia
.197
(14.2)
.559
Color Codes:
A
Black
B
White
C
Red
E
Yellow
F
Green
G
Blue
H
Gray
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
Series B
TYPICAL SWITCH DIMENSIONS
Straight PC
Single Pole
(6.0) Dia
.236
(0.6) Dia Typ
.024
(2.6) Dia
.102
26°
(8.8)
.346
2
3
Slot
(3.5)
.138
(10.0)
.394
(6.8)
.268
(0.8)
.031
(13.1)
.516
(1.0)
.039
1
1
2
3
(1.0)
.039
(2.54) Typ
.100
(3.1)
.122
CL
(2.54) Typ
.100
(0.8) Dia Typ
.031
CL
B12AP
Straight PC
Double Pole
(2.6) Dia
.102
(6.0) Dia
.236
(0.6) Dia Typ
.024
26°
Slot
(3.5)
.138
(10.0)
.394
(8.8)
.346
(0.8)
.031
(13.1)
.516
1
4
2
5
3
6
(8.8)
.346
4
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(0.8) Dia Typ
.031
(2.54) Typ
.100
(3.1)
.122
(5.08)
.200
B22AP
Straight PC • Bracket
Single Pole
(6.0) Dia
.236
(2.6) Dia
.102
(0.4) Typ
.016
(0.6) Typ
.024
1
(10.16)
.400
26°
Slot
(0.6) Dia Typ
.024
(6.0)
.236
(8.0)
.315
(0.8)
.031
(13.1)
.516
(2.7)
.106
(10.0)
.394
2
3
(2.54) Typ
.100
(3.1)
.122
1
(8.8)
.346
(1.0)
.039
(2.54)
.100
CL
(1.0)
.039
(2.54) Typ
.100
2
3
(0.8) Dia Typ
.031
(2.54)
.100
CL
B12AB
Straight PC • Bracket
Double Pole
(2.6) Dia
.102
(6.0) Dia
.236
(0.4) Typ
.016
(6.0)
.236
(8.8)
.346
(5.08)
.200
(10.16)
.400
26°
Slot
(0.6) Dia Typ
.024
(2.7)
.106
(10.0)
.394
(0.8)
.031
(13.1)
.516
1
4
2
5
3
6
(8.8)
.346
4
1
5
2
6
3
(0.6) Typ
.024
(5.08)
.200
(2.54) Typ
.100
(3.1)
.122
(2.54) Typ
.100
(0.8) Dia Typ
.031
B22AB
Right Angle PC
Single Pole
(6.0) Dia
.236
(2.6) Dia
.102
(3.4)
.134
3
Slot
(0.6) Typ
.024
(5.08)
.200
(2.7)
.106
(10.0)
.394
(0.4)
.016
(13.9)
.546
(3.1)
.122
(5.08)
.200
2
(8.8)
.346
1
(7.3)
.287
(0.6) Dia Typ
.024
(2.54) Typ
.100
1
2
3
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
B12AH
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
Series B
TYPICAL SWITCH DIMENSIONS
Right Angle PC
Double Pole
(2.6) Dia
.102
(6.0) Dia
.236
(3.1)
.122
Slot
(0.6) Typ
.024
(5.08)
.200
(2.7)
.106
(10.0)
.394
(8.8)
.346
(0.4)
.016
(4.4)
.173
(2.54)
.100
(5.08)
.200
(16.4)
.646
3
2
1
6
5
4
(8.8)
.346
1
2
(2.54) Typ
.100
(2.54)
3
.100
4
5
6
(5.08)
.200
(0.5)
.020
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
B22AH
Vertical PC
Single Pole
(2.6) Dia
.102
(6.0) Dia
.236
(1.0)
.039
1
26°
Slot
(0.6) Typ
.024
(2.54)
.100
(1.0)
.039
(2.7)
.106
(8.0)
.315
1
(0.4)
.016
(5.08)
.200
(10.0)
.394
(4.4)
.173
3
(0.5) (3.1)
.020 .122
(2.54) Typ
.100
(18.9)
.746
(8.8)
.346
2
(2.54) Typ
.100
2
3
(5.08)
.200
(0.8) Dia Typ
.031
(2.54)
CL
.100
(0.6) Dia Typ
.024
(1.0)
.039
CL
B12AV
Vertical PC
Double Pole
(6.0) Dia
.236
(2.6) Dia
.102
26°
(2.7)
.106
Slot
(0.6) Typ
.024
(5.08)
.200
(1.0)
.039
(8.8)
.346
(0.4)
.016
(5.08)
.200
(10.0)
.394
(4.4)
.173
1
4
2
5
3
6
(0.5) (3.1)
.020 .122
(2.54) Typ
.100
(18.9)
.746
4
(8.8)
.346
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(5.08)
.200
B22AV
Locking Lever • Straight PC • Bracket
Single Pole
(6.0)
.236
(4.5) Dia (5.1) Dia
.201
.177
(0.4) Typ
.016
(5.8)
.228
(11.5)
.453
(12.5)
.492
(8.0)
.315
(0.6) Typ
.024
1
(10.16)
.400
26°
Slot
(0.6) Dia Typ
.024
(5.5)
.217
(0.8)
.031
(15.5)
.610
2
3
(2.54) Typ
.100
(3.1)
.122
1
(8.8)
.346
(1.0)
.039
(2.54)
.100
CL
(1.0)
.039
(2.54) Typ
.100
2
3
CL
(0.8) Dia Typ
.031
(2.54)
.100
B12LB
Locking Lever • Straight PC • Bracket
Double Pole
(4.5) Dia (5.1) Dia
.201
.177
(6.0) Dia
.236
(0.4) Typ
.016
(10.16)
.400
26°
Slot
(5.68)
.224
(8.85)
.348
(0.6) Dia Typ
.024
(5.8)
.228
(11.5)
.453
(12.5)
.492
(5.5)
.217
(0.8)
.031
(15.5)
.610
(2.54) Typ
.100
(3.1)
.122
(5.08)
.200
1
4
2
5
3
6
(8.8)
.346
(0.6) Typ
.024
(5.08)
.200
4
1
5
2
6
3
(2.54) Typ
.100
(0.8) Dia Typ
.031
B22LB
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Antistatic Toggles
Series B
TYPICAL SWITCH DIMENSIONS
Threaded Bushing • Straight PC
Panel Seal • Single Pole
(2.6) Dia
.102
(0.6) Dia Typ
.024
M6 P0.75
1
26°
Slot
(4.8)
.189
(6.8)
.268
(8.8)
.346
3
(8.0)
.315
(5.5)
.217
(0.8)
.031
(15.1)
.594
(2.54) Typ
.100
(3.1)
.122
(1.0)
.039
1
2
2
3
CL
(1.0)
.039
(2.54) Typ
.100
(0.8) Dia Typ
.031
CL
B12A1P
Threaded Bushing • Straight PC
Panel Seal • Double Pole
(2.6) Dia
.102
(0.6) Dia Typ
.024
M6 P0.75
26°
Slot
(4.8)
.189
(8.8)
.346
(8.0)
.315
(5.5)
.217
(0.8)
.031
(15.1)
.594
(2.54) Typ
.100
(3.1)
.122
1
4
2
5
3
6
(8.8)
.346
4
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(0.8) Dia Typ
.031
(2.54) Typ
.100
CL
B22A1P
STANDARD HARDWARE & PANEL CUTOUT
AT513M
Metric Hex Nut
AT063
Gasket
M6 P0.75
(8.0)
.315
Material:
Brass,
Nickel plated
(9.0)
.354
(1.5)
.059
(6.2) (8.6)
.244 .339
Material:
Nitrile butadiene
rubber
(6.0)
.236
(5.0)
.197
(4.9)
.193
(6.9)
.272
(1.3)
.051
Maximum Panel Thickness
with Standard Hardware:
.087” (2.2mm)
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Similar pages