EPCOS B32356B4255J013 Film capacitors - ac capacitor Datasheet

Film capacitors – AC capacitors
Motor run capacitors
400 V; class A; 85 °C / 450 V; class B; 85 °C
Series/Type:
B32356 – MotorCap P2 Compact
Ordering code:
Date:
Version:
June 2009
3.0
Content of inside pages of data sheet. Data will be automatically entered into headers and footers.
Please fill in the table and then change the colour to “White”. This ensures that the table disappears
for the customer pdf.
Identification/Classification 1:
(header 1)
Film capacitors – AC capacitors
Identification/Classification 2:
(header 2)
Motor run capacitors
Ordering code:
Series/Type:
B32356 – MotorCap P2 Compact
Preliminary data (optional):
(if necessary)
Department:
FK PC PM AC
Date:
June 2009
 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Film capacitors – AC capacitors
Motor run capacitors
B32356 – MotorCap P2 Compact
Construction




Dielectric: polypropylene film
Electrode: segmented metallized film
Plastic can and top material to IEC 60335-1
Dry type
Features






Self-healing properties
Low dissipation factor
P2 safety class to IEC 60252-1 2001-02
High insulation resistance
Case IP 53 protected
IEC/EN 60335 compatible
Typical applications
 For general sine wave applications,
mainly as motor run capacitor
Terminals
 Twin core cable type PP 2 × 0.50 mm2, 600 V, 95 °C
 Connectors on request
Mounting parts (optional)
 Threaded stud at bottom of can (M8, max. torque = 5 Nm)
 Fast fixation for mounting into a hole of Ø 8 mm
Technical data and specifications
Reference standards
IEC 60252-1 2001-02 / EN 60252 2001
Safety class to IEC 60252-1 2001-02
P0
P2
Life expectancy to IEC 60252 2001
400 V/85 °C: 30000 h (class A)
450 V/85 °C: 10000 h (class B)
Rated capacitance CR
See dimensions table
Tolerance
5%, other tolerances upon request
Rated voltage VR
400, 450 V AC
Rated frequency fR
50/60 Hz
Maximum ratings
Maximum permissible voltage Vmax
1.1 · VR
(VR= rated voltage)
Maximum permissible current Imax
1.3 · IR
(IR= rated current)
FK PC PM AC
Please read the important notes,
cautions and warnings.
June 2009
Page 2 of 66666666
Film capacitors – AC capacitors
Motor run capacitors
B32356 – MotorCap P2 Compact
Test data
AC test voltage terminal to terminal VTT
2 · VR, 2 s
Insulation resistance Rins or time constant 
at 20 °C, rel. Humidity  65%
(minimum as-delivered values)
3,000 s
Dissipation factor tan  at 20 °C
 1.0 · 10-3 (120 Hz)
Maximum rate of voltage rise dV/dtmax
10 V/s
Climatic data
Climatic category
25/085/21 to IEC 60068-1
Lower category Tmin
–25 °C
Upper category Tmax
+85 °C
Damp heat test ttest
21 days
Mechanical and thermal properties
Ball pressure test to IEC 60309-1 sec. 27.3
20 N at 125 °C
Plastic can and top disk material
Compliant to EN 60252
 UL 94 V2 compatible
 Glow wire test to IEC 60695-2-1/0 and -2-1/1
Test temperature 550 °C for IR ≤ 0.5 A
Test temperature 750 °C for IR > 0.5 A
Self-extinguish within 2 seconds of
withdrawing glow wire without igniting
wrapping tissue to GWIT
 Part is compatible to EN 60335-1
Tracking Test to IEC 60112 solution A
> 250 V
Protection class to IEC 60529 2001
IP 53
Compatibility to RoHS
Compliance to directive 2002/95/EC
Approvals
VDE – 400 V/85 °C: 30,000 h (class A)
Approved
VDE – 450 V/85 °C: 10,000 h (class B)
Approved
FK PC PM AC
Please read the important notes,
cautions and warnings.
June 2009
Page 3 of 66666666
Film capacitors – AC capacitors
Motor run capacitors
Dimensional drawing
B32356 – MotorCap P2 Compact
Mounting options
* = 1: can without mounting
* = 2: can with M8 bolt
10
Stud M8x1.25
Star Washer 8mm
Nut M8x1.25
* = 5: fast fix mounting
10
M8-sized
M-Clip
fast fixation
10
10.2+0.1/-0
2.0±0.05
Ø8.2+0.2/-0
Ø2.2+0.1/-0
FK PC PM AC
Please read the important notes,
cautions and warnings.
June 2009
Page 4 of 66666666
Film capacitors – AC capacitors
Motor run capacitors
B32356 – MotorCap P2 Compact
Ordering codes and packing units
VR
CR
Max. dimensions
d×l
V AC
µF
mm
400 / 450
Ordering code
(composition see below)
Packing units
pcs.
2.0
25 × 50
B32356B4205J0*#
112
2.5
25 × 50
B32356B4255J0*#
112
3.0
25 × 50
B32356B4305J0*#
112
3.5
30 × 56
B32356B4355J0*#
112
4.0
30 × 56
B32356B4405J0*#
112
5.0
30 × 56
B32356B4505J0*#
112
6.0
30 × 62
B32356B4605J0*#
84
7.0
35 × 56
B32356B4705J0*#
84
7.5
35 × 62
B32356B4755J0*#
84
8.0
35 × 62
B32356B4805J0*#
84
9.0
35 × 71
B32356B4905J0*#
84
10
35 × 71
B32356B4106J0*#
84
11
40 × 72
B32356B4116J0*#
60
12
35 × 96
B32356B4126J1*#
84
12
40 × 72
B32356B4126J0*#
60
13
40 × 72
B32356B4136J0*#
60
15
45 × 72
B32356B4156J0*#
60
18
50 × 96
B32356B4186J0*#
32
20
50 × 96
B32356B4206J0*#
32
Composition of ordering code:
*: construction
1
plastic can
3
plastic can with M8 bolt
5
plastic can with fast fixation device available for diameters 30 mm, 32 mm and 35 mm,
others on request
#: cable length (dimension ‘B’ in drawing)
2
200 mm
3
300 mm
U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power
Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to
prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are
kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM AC
Please read the important notes,
cautions and warnings.
June 2009
Page 5 of 66666666
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very high
level of operational safety and especially in customer applications in which the malfunction or
failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of the
customer application or other action taken by the customer (e.g. installation of protective circuitry
or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or
failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material
Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed
questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
FK PC PM AC
June 2009
Page 6 of 6
Similar pages