EPCOS B32922C3683K289 Emi suppression capacitors (mkp) Datasheet

Film Capacitors
EMI Suppression Capacitors (MKP)
Series/Type:
B32921C/D ... B32926C/D
Date:
February 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
EMI suppression capacitors (MKP)
B32921C/D ... B32926C/D
X2 / 305 VAC
Typical applications
X2 class for interference suppression
"Across the line" applications
Dimensional drawing
Climatic
Max. operating temperature: 110 °C
Climatic category (IEC 60068-1): 40/105/56
Construction
Dielectric: polypropylene (MKP)
Plastic case (UL 94 V-0)
Epoxy resin sealing (UL 94 V-0)
Dimensions in mm
Features
Very small dimensions
Self-healing properties
Lead spacing
±0.4
10
15
22.5
27.5
37.5
Terminals
Parallel wire leads, lead-free tinned
Standard lead lengths: 6 1 mm
Special lead lengths available on request
Marking
Manufacturer's logo, lot number,
date code, rated capacitance (coded),
cap. tolerance (code letter),
rated AC voltage,
series number, sub-class (X2),
dielectric code (MKP), climatic category,
passive flammability category, approvals.
Lead diameter
d1
0.6
0.8
0.8
0.8
1.0
Marking Examples
= 10 mm
Delivery mode
Bulk (untaped)
Taped (Ammo pack or reel)
For taping details, refer to chapter
"Taping and packing"
Type
B32921
B32922
B32923
B32924
B32926
≥ 15 mm/CR≤1 µF
= 22.5, 27.5,
37 mm/CR>1 µF
Approvals
Marks of conformity
Please read Important notes
at the end of this document.
Standards
Certificate
EN 132400, IEC 60384-14
40010694
UL 1414 / UL 1283
E97863 / E157153
CSA C22.2 No.1 / No. 8
E97863 / E157153 (approved by UL)
CQC (GB/T 14472-1998)
CQC001007-14859
Page 2 of 8
B32921C/D ... B32926C/D
X2 / 305 VAC
Overview of available types
Lead spacing 10 mm
15 mm
22.5 mm
27.5 mm
37.5 mm
Type
B32922
B32923
B32924
B32926
B32921
CR (µF)
0.010
0.022
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.47
0.68
1.0
1.5
2.2
3.3
4.7
6.8
10
Please read Important notes
at the end of this document.
Page 3 of 8
B32921C/D ... B32926C/D
X2 / 305 VAC
Ordering codes and packing units
Lead spacing CR
mm
10
15
22.5
µF
0.010
0.022
0.033
0.047
0.068
0.10
0.033
0.047
0.068
0.10
0.15
0.22
0.33
0.33
0.47
0.68
0.22
0.33
0.33
0.47
0.68
1.0
1.5
2.2
Max. dimensions
w×h×l
mm
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
4.0 × 9.0 × 13.0
5.0 × 11.0 × 13.0
6.0 × 12.0 × 13.0
6.0 × 12.0 × 13.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
5.0 × 10.5 × 18.0
6.0 × 12.0 × 18.0
7.0 × 12.5 × 18.0
8.0 × 14.0 × 18.0
8.5 × 14.5 × 18.0
9.0 × 17.5 × 18.0
11.0 × 18.5 × 18.0
6.0 × 15.0 × 26.5
6.0 × 15.0 × 26.5
7.0 × 16.0 × 26.5
8.5 × 16.5 × 26.5
10.5 × 16.5 × 26.5
11.0 × 20.5 × 26.5
12.0 × 22.0 × 26.5
14.5 × 29.5 × 26.5
Ordering code
(composition see
below)
B32921C3103+*** ◆
B32921C3223+*** ◆
B32921C3333+*** ◆
B32921C3473+*** ◆
B32921C3683+***
B32921C3104M***
B32922C3333K***
B32922C3473K***
B32922C3683K*** ◆
B32922C3104+*** ◆
B32922C3154+*** ◆
B32922C3224+*** ◆
B32922C3334M*** ◆
B32922D3334K***
B32922C3474+*** ◆
B32922C3684+*** ◆
B32923C3224+***
B32923C3334M***
B32923D3334K***
B32923C3474+***
B32923C3684+***
B32923C3105+*** ◆
B32923C3155M***
B32923C3225+*** ■
Ammo
pack
pcs./unit
1000
1000
1000
830
680
680
1170
1170
1170
1170
960
830
730
680
640
680
680
580
480
390
370
Reel
Untaped
pcs./unit
1700
1700
1700
1300
1100
1100
1300
1300
1300
1300
1100
900
750
700
700
550
700
700
600
500
400
350
pcs./unit
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
250
720
720
630
510
540
510
450
260
◆ Preferred type
■ Not for new design
For new design, please refer to the B3292xE/F data sheet.
Further intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 1 mm)
(Closer tolerances on request)
Please read Important notes
at the end of this document.
Page 4 of 8
B32921C/D ... B32926C/D
X2 / 305 VAC
Ordering codes and packing units
Lead spacing CR
mm
27.5
37.5
µF
0.68
1.0
1.5
2.2
3.3
3.3
4.7
4.7
2.2
3.3
4.7
6.8
10.0
Max. dimensions
w×h×l
mm
11.0 × 19.0 × 31.5
11.0 × 19.0 × 31.5
12.5 × 21.5 × 31.5
14.0 × 24.5 × 31.5
16.0 × 32.0 × 31.5
18.0 × 27.5 × 31.5
18.0 × 33.0 × 31.5
21.0 × 31.0 × 31.5
14.0 × 25.0 × 41.5
16.0 × 28.5 × 41.5
18.0 × 32.5 × 41.5
20.0 × 39.5 × 41.5
28.0 × 42.5 × 41.5
Ordering code
(composition see
below)
B32924C3684+***
B32924C3105+***
B32924C3155+*** ◆
B32924C3225+*** ■
B32924D3335K*** ■
B32924C3335M*** ■
B32924C3475M*** ■
B32924D3475K*** ■
B32926C3225+*** ■
B32926C3335+*** ■
B32926C3475+*** ■
B32926C3685+*** ■
B32926C3106+*** ■
Ammo
pack
pcs./unit
Reel
pcs./unit pcs./unit
350
320
350
320
300
280
260
220
200
200
180
115
100
90
75
55
◆ Preferred type
■ Not for new design
For new design, please refer to the B3292xE/F data sheet.
Further intermediate capacitance values on request.
Composition of ordering code
+ = Capacitance tolerance code:
M = ±20%
K = ±10%
*** = Packaging code:
289 = Ammo pack
189 = Reel
000 = Untaped (lead length 6 1 mm)
(Closer tolerances on request)
Please read Important notes
at the end of this document.
Page 5 of 8
Untaped
B32921C/D ... B32926C/D
X2 / 305 VAC
Technical data
Max. operating temperature Top,max
Dissipation factor tan δ (in 10-3)
at 20 °C (upper limit values)
+110 °C
Insulation resistance Rins
or time constant τ = CR Rins
CR≤0.33 µF
at 20 °C, rel. humidity ≤ 65%
(minimum as-delivered values)
DC test voltage
CR≤0.1 µF 0.1µF<CR ≤2.2 µF CR >2.2 µF
at
1 kHz
100 kHz
1.0
5.0
1.0
2.0
CR>0.33 µF
100 000 MΩ 30 000 s
2121 V, 2 s
Passive flammability category
to IEC 40 (CO) 752
B
Maximum continuous AC voltage VAC
Rated AC voltage (IEC 60384-14)
Operating AC voltage Vop at high
temperature
310 V (50/60 Hz)
Damp heat test
Limit values after damp heat test
56 days / 40 °C / 93% relative humidity
Capacitance change ∆C/C
≤ 5%
Dissipation factor change ∆ tan δ ≤ 0.5 10-3 (at 1 kHz)
Insulation resistance Rins
≤ 1.0 10-3 (at 10 kHz)
or time constant τ = CR Rins
≥ 50% of minimum
as-delivered values
Please read Important notes
at the end of this document.
305 V (50/60 Hz)
TA ≤ 110 °C
TA ≤ 110 °C
Page 6 of 8
Vop = VAC
(continuously)
Vop = 1.25 VAC (1000 h)
B32921C/D ... B32926C/D
X2 / 305 VAC
Pulse handling capability
"dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal
voltages, expressed in V/µs.
"k0" represents the maximum permissible pulse characteristic of the waveform applied to the
capacitor, expressed in V2/µs.
Note:
The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the
capacitor.
dV/dt and k0 values
Lead spacing
Version
dV/dt in V/µs
k0 in V2/µs
10 mm
C/D
475
408500
15 mm
C/D
340
292400
22.5 mm
C/D
170
146200
Impedance Z versus frequency f
(typical values)
Please read Important notes
at the end of this document.
Page 7 of 8
27.5 mm
C/D
120
103200
37.5 mm
C/D
80
68800
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out
in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications
in which the malfunction or failure of a passive electronic component could endanger human
life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured
by means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 8 of 8
Similar pages