EPCOS B37472J5102K072 Multilayer ceramic capacitor Datasheet

Multilayer Ceramic Capacitors
Chip
X8R
Ordering code system
B37541
K
5
102
K
0
60
Packaging
60
62
70
72
^
^
^
^
cardboard tape, 180-mm reel
blister tape, 180-mm reel
cardboard tape, 330-mm reel
blister tape, 330-mm reel
Internal coding
Capacitance tolerance
J ^ ± 5%
K ^ ± 10 % (standard)
M ^ ± 20 %
Capacitance, coded
(example)
Rated voltage
Termination
Standard:
On request:
102 ^ 10 · 102 pF = 1 nF
103 ^ 10 · 103 pF = 10 nF
Rated voltage [VDC]
Code
50
5
K ^ nickel barrier for all case sizes
J ^ silver-palladium for conductive adhesion for all case sizes
Type and size
Chip size
(inch / mm)
Temperature characteristic
X8R
0603 / 1608
0805 / 2012
1206 / 3216
1210 / 3225
B37531
B37541
B37472
B37550
70
10/02
Multilayer Ceramic Capacitors
Chip
X8R
Features
■
■
■
■
■
Wide temperature range up to 150 °C
High volumetric efficiency
Non-linear capacitance change
High insulation resistance
High pulse strength
Applications
■
■
■
■
■
Automotive
Blocking
Coupling
Decoupling
Interference suppression
Termination
■ For soldering: Nickel-barrier terminations (Ni)
Options
■ Alternative capacitance tolerances available on request
Delivery mode
■ Cardboard and blister tape (blister tape for chip thickness ³ 1,2 ± 0,1 mm and case size 1210)
180-mm and 330-mm reel available
Electrical data
Temperature characteristic
Climatic category (IEC 60068-1)
Standard
Dielectric
Rated voltage1)
Test voltage
Capacitance range / E series
Max. relative capacitance change
Dissipation factor (limit value)
Insulation resistance 2) at + 25 °C
Insulation resistance 2) at +125 °C
Time constant 2) at + 25 °C
Time constant 2) at +125 °C
Operating temperature range
Ageing 3)
VR
Vtest
CR
DC/C
tan d
Rins
Rins
t
t
Top
1) Note: No operation on AC line.
2) For CR > 10 nF the time constant t = C · Rins is given.
3) Refer to chapter “General Technical Information”, page 197.
71
10/02
X8R
55/150/56
EIA
Class 2
50
2,5 · VR/5 s
100 pF … 150 nF (E6)
± 15
< 25 · 10 –3
> 105
> 104
> 1000
> 100
–55 … +150
yes
VDC
VDC
%
MW
MW
s
s
°C
Multilayer Ceramic Capacitors
X8R
X8R
Capacitance tolerances
Code letter
J
K
M
(standard)
Tolerance
± 5%
± 10%
± 20%
Dimensional drawing
ss
b
k
k
k
KKE0272-V
k
KKE0329-N
Dimensions (mm)
Case size
(inch)
(mm)
0603
1608
0805
2012
1206
3216
1210
3225
l
1,6 ± 0,15
b
0,8 ± 0,10
2,0 ± 0,20
3,2 ± 0,20
3,2 ± 0,30
1,25 ± 0,15
1,6 ± 0,15
s
2,5 ± 0,30
0,8 ± 0,10
1,30 max.
1,30 max.
k
1,30 max.
0,1 – 0,4
0,13 – 0,75
0,25 – 0,75
0,25 – 0,75
Tolerances to CECC 32101-801
72
10/02
Multilayer Ceramic Capacitors
X8R
X8R
Recommended solder pad
C
A
D
KKE0308-1
Maximum dimensions (mm)
Case size
(inch/mm)
Type
A
C
D
0603/1608
single chip
1,0
3,0
1,0
0805/2012
single chip
1,2
3,4
1,3
1206/3216
single chip
1,2
4,5
1,8
1210/3225
single chip
1,2
4,5
2,8
Termination
Termination
(nickel barrier)
Ceramic body
Inner electrode
Substrate electrode
Intermediate electrode
External electrode
AgPd
Ag
Ni
Sn
KKE0484-W
73
10/02
Multilayer Ceramic Capacitors
X8R
X8R
Product range chip capacitors
X8R
Size1)
inch
mm
Type
VR (VDC)
CR
100
pF
150
pF
220
pF
330
pF
470
pF
680
pF
0603
1608
0805
2012
1206
3216
1210
3225
B37531
B37541
B37472
B37550
50
50
50
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10
nF
15
nF
22
nF
33
nF
47
nF
68
nF
100
nF
150
nF
1) l ´ b (inch) / l ´ b (mm)
74
10/02
50
Multilayer Ceramic Capacitors
X8R
X8R; 0603 and 0805
Ordering codes and packing for X8R, 50 VDC, nickel-barrier terminations
mm
Cardboard tape,
Æ 180-mm reel
** ^ 60
pcs/reel
Cardboard tape,
Æ 330-mm reel
** ^ 70
pcs/reel
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
0,6 ± 0,1
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
20000
Chip thickness
CR1)
Ordering code 2)
Case size 0603, 50 VDC
100, pF
150, pF
220, pF
330, pF
470, pF
680, pF
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
B37531K5101K0**
B37531K5151K0**
B37531K5221K0**
B37531K5331K0**
B37531K5471K0**
B37531K5681K0**
B37531K5102K0**
B37531K5152K0**
B37531K5222K0**
B37531K5332K0**
B37531K5472K0**
Case size 0805, 50 VDC
470, pF
680, pF
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10, nF
15, nF
22, nF
B37541K5471K0**
B37541K5681K0**
B37541K5102K0**
B37541K5152K0**
B37541K5222K0**
B37541K5332K0**
B37541K5472K0**
B37541K5682K0**
B37541K5103K0**
B37541K5153K0**
B37541K5223K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 72.
75
10/02
Multilayer Ceramic Capacitors
X8R
X8R; 1206 and 1210
Ordering codes and packing for X8R, 50 VDC, nickel-barrier terminations
Cardboard tape,
Æ 180-mm reel
** ^ 60
pcs/reel
Cardboard tape,
Æ 330-mm reel
** ^ 70
pcs/reel
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
1,2 ± 0,1
1,2 ± 0,1
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
4000
30003)
30003)
Blister tape,
Æ 180-mm reel
** ^ 62
pcs/reel
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
16000
120004)
120004)
Blister tape,
Æ 330-mm reel
** ^ 72
pcs/reel
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
0,8 ± 0,1
1,2 ± 0,1
4000
4000
4000
4000
4000
4000
4000
3000
16000
16000
16000
16000
16000
16000
16000
12000
Chip thickness
CR1)
Ordering code 2)
mm
Case size 1206, 50 VDC
1,0 nF
1,5 nF
2,2 nF
3,3 nF
4,7 nF
6,8 nF
10, nF
15, nF
22, nF
33, nF
47, nF
68, nF
100, nF
B37472K5102K0**
B37472K5152K0**
B37472K5222K0**
B37472K5332K0**
B37472K5472K0**
B37472K5682K0**
B37472K5103K0**
B37472K5153K0**
B37472K5223K0**
B37472K5333K0**
B37472K5473K0**
B37472K5683K0**
B37472K5104K0**
Case size 1210, 50 VDC
10,
15,
22,
33,
47,
68,
100,
150,
nF
nF
nF
nF
nF
nF
nF
nF
B37550K5103K0**
B37550K5153K0**
B37550K5223K0**
B37550K5333K0**
B37550K5473K0**
B37550K5683K0**
B37550K5104K0**
B37550K5154K0**
1) Other capacitance values on request.
2) The table contains the ordering codes for the standard capacitance tolerance.
For other available capacitance tolerances see page 72.
3) Blister tape, 180-mm reel, ordering code ** ^ 62
4) Blister tape, 330-mm reel, ordering code ** ^ 72
76
10/02
Multilayer Ceramic Capacitors
X8R
X8R
Typical characteristics
Capacitance change DC/C25 versus
temperature T
Capacitance change DC/C0 versus
superimposed DC voltage V
∆C
C0
KKE0489-3
5
%
0
_5
_ 10
_ 15
_ 20
_ 25
_ 30
_ 35
0
KKE0264-6
10 4
Ω
Z
1 nF
10 1
10 nF
10 0
100 nF
10
10
_1
_2
10 0
10 1
20
30
Dissipation factor tan d versus
temperature T
Impedance |Z | versus
frequency f
10 2
10
10 2
MHz 10 3
f
77
10/02
40 V 50
V
Multilayer Ceramic Capacitors
X8R
X8R
Typical characteristics
Insulation resistance Rins versus
temperature T
Capacitance change DC/C1 versus
time t
KKE0191-V
10
∆C %
C1
0
_5
_ 10
_ 15
_ 20
10 0
78
10/02
10 1
10 2
h
t
10 3
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages