TDK B39202B9477P810 Saw components saw filter Datasheet

SAW Components
SAW Filter
PCS / WCDMA band II
Series/Type:
Ordering code:
B9477
B39202B9477P810
Date:
Version:
August 16, 2012
2.2
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
Application
■ Low-loss RF filter for mobile telephone
PCS systems, receive path (RX)
Features
2
0.325
Package size 1.4 x 1.1
max. Package height 0.45 mm
RoHS compatible
Approximate weight 0.003 g
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitive Level 3
3
1
bottom view
5
0.5
4
0.5
0.45 max.
■
■
■
■
■
■
■
■
0.25
mm2
0.575
■ Useable passband 60 MHz
■ Useable for antenna diversity systems
■ Suitable for GPRS class 1 to 12
1.4
4
1
1.1
5
2
side view
top view
3
Pin configuration
■ 1
■ 4
■ 2,3,5
Input unbalanced
Output unbalanced
To be grounded
Please read cautions and warnings and
important notes at the end of this document.
2
1
4
2,5
3
August 16, 2012
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
Characteristics
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T = –30 ˚C to +85 ˚C
ZS =
50 Ω (unbalanced)
ZL =
50 Ω (unbalanced)
-
B9477
typ.
@ 25˚C
1960.0
-
2.6
4.2 1)
dB
dB
min.
Center frequency
fC
Maximum insertion attenuation
1930.6 ... 1989.4
max.
-
αmax
MHz
∆α
Amplitude ripple (p-p)
1930.6 ... 1989.4
MHz
-
1.1
2.6
Input return loss
1930.6
... 1989.4
MHz
-
1.8
2.3
Output return loss
1930.6
... 1989.4
MHz
-
2.0
2.4
DC
... 1500.0
1500.0 ... 1907.0
1907.0 ... 1909.4
2040.0 ... 2070.0
2070.0 ... 2500.0
2500.0 ... 4500.0
4500.0 ... 5200.0
5200.0 ... 6000.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
43
43
432)
35
35
31
31
22
51
48
513)
55
46
37
36
30
-
α
Attenuation
1)
2)
3)
MHz
4.0dB for T= 0...85˚C
18dB for T= 100˚C
49dB for T= 100˚C
Please read cautions and warnings and
important notes at the end of this document.
3
August 16, 2012
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
Maximum ratings
Operable temperature range T
–30/+85
˚C
Storage temperature range
Tstg
–40/+85
˚C
DC voltage
VDC
5
V
ESD voltage
VESD
Input Power at PCS Tx band PIN
1)
501)
V
dBm
16
machine model, 10 pulses
CW signal @ T=55˚C, 2000h
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
4
August 16, 2012
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
Transfer function (narrowband)
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
5
August 16, 2012
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
Smith chart
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
6
August 16, 2012
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
References
Type
B9477
Ordering code
B39202B9477P810
Marking and package
C61157-A8-A3
Packaging
F61074-V8237-Z000
Date codes
L_1126
B9477_NB.s2p
S-parameters
B9477_WB.s2p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See
http://www.tdk.co.jp/tefe02/coil.htm#aname1
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2012. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
August 16, 2012
SAW Components
B9477
SAW Filter
1960.0 MHz
Data sheet
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
Please read cautions and warnings and
important notes at the end of this document.
8
August 16, 2012
Similar pages