EPCOS B43564B0478M000 Frequency converter Datasheet

Capacitors with Screw Terminals
B43564
Long Useful Life – 85 °C
B43584
B43564, B43584
Long-life grade capacitors
Applications
■ Frequency converters
■ Uninterruptible power supplies
■ For switch-mode power supplies in professional
equipments
Features
KAL0567-B
■ High reliability
■ Extremely good electrical characteristics and
small dimensions
■ High ripple current capability
■ All-welded construction ensures reliable
electrical contact
■ Version with optimized construction for base cooling
2-pad solution) available
■ Version with low-inductance design available
■ Self-extinguishing electrolyt
Construction
■
■
■
■
■
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud and d ≤ 76,9 mm are
not insulated, types with d = 91 mm have fully insulated bases
133 10/02
B43564
B43584
B43564 / B43584
Long Useful Life – 85 °C
Specifications and characteristics in brief
Rated voltage UR
350 … 500 VDC
Surge voltage US
1,15 · UR (for UR ≤ 250 VDC)
1,10 · UR (for UR ≥ 350 VDC)
Rated capacitance CR
820 … 10 000 µF
Capacitance tolerance
± 20 %
Leakage current IL
M
(5 min, 20 °C)
C R U R 0,7
I L ≤ 0,3 µA ⋅ æè ------- ⋅ -------öø + 4 µA
µF V
Self-inductance ESL
Approx. 20 nH
Capacitors with low-inductance design:
d ≥ 64,3 mm: approx. 13 nH
Useful life
85 °C; UR; I~R
40 °C; UR; 1,5 · I~R
40 °C; UR; 1,4 · I~R
350…450 V
500 V
> 15 000 h
> 250 000 h
> 12 000 h ∆C/C
ESR
−
> 250 000 h I L
Requirements:
≤ ± 30 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure
percentage: ≤ 1 %
Failure rate: ≤ 40 fit (≤ 40 · 10 –9/h)
(for definiton “fit”,
refer to chapter “Quality”, page 62)
Post test requirements:
Voltage endurance test
∆C/C
ESR
IL
≤ ± 10 % of initial value
≤ 1,3 times initial specified limit
≤ initial specified limit
85 °C; UR
2 000 h
Vibration resistance
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 to 55 Hz,
acceleration max. 10 g, duration 3 × 2 h
IEC climatic category
To IEC 60068-1:
25/085/56 (– 25 °C/+ 85 °C/56 days damp heat test)
Detail specifications
Similar to CECC 30301-803, CECC 30301-807
Sectional specification
IEC 60384-4
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
51,6 mm
64,3 mm
76,9 mm
91,0 mm
I~max
30 A
40 A
50 A
70 A
134 10/02
B43564 / B43584
Long Useful Life – 85 °C
Dimensional drawings
Type B43564
Ring clip/clamp mounting
Type B43584
Threaded stud mounting
M5: min. reach of screw = 8 mm
M6: min. reach of screw = 12 mm*)
*) 8 mm for low-inductance design
Positive pole marking: +
The base of types with stud mounting and d = 91 mm is fully insulated (the lengths l and l1 are increased by 0,5 mm in these cases). For types with stud mounting and d ≤ 76 mm the base is not
insulated. Also refer to the notes on mounting given on page 168.
Dimensions and weights
Terminal
Dimensions (mm) with insulating sleeve
+0
d
I±1
I1 ± 1 I2 – 1 l3
d1
M5
M5
51,6 +0/–0,8 80,7
51,6 +0/–0,8 105,7
87,2
112,2
17
17
7,0 +0,2/–1
7,0 +0,2/–1
M 12 8,2
M 12 8,2
M5
64,3 +0/–0,8 105,7
112,2
17
7,0 +0,2/–1
M 12 8,2
13,5
28,5
440
M6
M6
M6
76,9 +0/–0,7 105,7
76,9 +0/–0,7 143,2
76,9 +0/–0,7 220,7
111,5
149,0
226,5
17
17
17
6,4 +1,1/–0,8 M 12 17,7
6,4 +1,1/–0,8 M 12 17,7
6,4 +1,1/–0,8 M 12 17,7
17,7
17,7
17,7
31,7
31,7
31,7
540
840
1300
M6
M6
M6
91,0 +0/–2
91,0 +0/–2
91,0 +0/–2
97,0
144,5
221,0
103,3
149,8
226,3
17
17
17
6,4 +1,1/–0,8 M 12 17,7
6,4 +1,1/–0,8 M 12 17,7
6,4 +1,1/–0,8 M 12 17,7
17,7
17,7
17,7
31,7
31,7
31,7
750
1200
1900
d2 max d3 max a
13,5
13,5
+ 0,2
– 0,4
22,2
22,2
Approx.
wt. (g)
220
280
Dimensions are also valid for 2-pad solution and low-inductance design.
Packing
For ecological reasons the packing is pure cardboard.
Capacitor diameter d
Packing units (pieces)
Capacitor diameter d
Packing units (pieces)
51,6 mm
64,3 mm
22
15
76,9 mm
91,0 mm
12
8
135 10/02
B43564 / B43584
Long Useful Life – 85 °C
Special designs
■ Low-inductance design
■ 2-pad solution
Design for optimized connection of the capacitor to the heatsink when using base cooling.
This version is available for capacitors without threaded stud and for diameters ≥ 64,3 mm
(cf. I~R(B) in table “Technical data and ordering codes” and useful life graphs).
Thermopad
thickness
0,5 mm
0,2 mm
Heatsink
KAL0823-3-E
Ordering codes:
Design
Identification in 3rd
block of ordering code
Remark
Low inductance (13 nH)
M003
For capacitors with diameter d ≥ 64,3 mm
2-pad solution
M006
For capacitors with diameter d ≥ 64,3 mm and
without threaded stud
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
For terminals
Thread
Toothed
washers
Screws/Nuts
M5
A 5,1 DIN 6797
Cylinder-head screw M 5 × 8 DIN 84-4.8
2
M6
A 6,4 DIN 6797
Cylinder-head screw M 6 × 12 DIN 85-4.8
2,5 Nm
For mounting M 12
J 12,5 DIN 6797 Hex nut BM 12 DIN 439
The following must be ordered separately:
Ring clips
Clamps for capacitors with d ≥ 64,3 mm
Insulating parts
Maximum
torque
10
B44030 (cf. page 169)
B44030 (cf. page 173)
B44020 (cf. page 166)
136 10/02
Nm
Nm
B43564 / B43584
Long Useful Life – 85 °C
Overview of available types
UR (VDC)
350
CR (µF)
Case dimensions d × l (mm)
400
450
51,6 × 80,7
820
1 000
51,6 × 80,7
51,6 × 80,7
51,6 × 105,7
51,6 × 105,7
51,6 × 105,7
64,3 × 105,7
51,6 × 105,7
64,3 × 105,7
76,9 × 105,7
64,3 × 105,7
76,9 × 143,2
76,9 × 143,2
91,0 × 97,0
76,9 × 220,7
91,0 × 144,5
76,9 × 220,7
76,9 × 220,7
51,6 × 105,7
1 200
1 500
64,3 × 105,7
1 800
2 200
76,9 × 105,7
2 700
3 300
500
76,9 × 143,2
3 900
4 700
76,9 × 105,7
6 000
76,9 × 143,2
91,0 × 144,5
6 800
8 200
91,0 × 144,5
10 000
76,9 × 220,7
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
137 10/02
B43564 / B43584
Long Useful Life – 85 °C
Technical data and ordering codes
UR
CR
100 Hz
20 °C
VDC µF
Case
dimensions
d×l
mm
350
1 000 51,6 × 80,7 130
1 500 51,6 × 105,7 93
400
450
500
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
I~max
100 Hz
40 °C
A
120
93
14
17
I~max
100 Hz
85 °C
A
I ~R
100 Hz
85 °C
A
6,4
8,1
5,1
6,5
I~R(B) Ordering code1)
100 Hz
85 °C
A
8,8
10
B435*4A4108M000
B435*4A4158M000
2 200 51,6 × 105,7
3 300 64,3 × 105,7
72
48
66
47
21
29
10
14
8,0
11
14
19
B435*4B4228M000
B435*4B4338M0002)
4 700 76,9 × 105,7
38
38
36
17
13
25
B435*4B4478M0002)
6 000 76,9 × 143,2
32
32
41
19
15
25
B435*4A4608M0002)
8 200 91,0 × 144,5
10 000 76,9 × 220,7
23
20
23
20
57
50
27
29
21
23
36
32
B435*4A4828M0002)
B435*4A4109M0002)
1 000 51,6 × 80,7 130
1 500 51,6 × 105,7 93
120
81
14
18
6,6
7,7
5,2
6,7
9,8
11
B435*4A0108M000
B435*4A0158M000
9,7
8,3
14
B435*4A0228M0002)
2 200 64,3 × 105,7
72
65
22
3 300 76,9 × 143,2
54
51
29
13
11
16
B435*4A0338M0002)
4 700 91,0 × 97,0
35
35
41
19
15
32
B435*4B0478M0002)
6 000 76,9 × 220,7
32
32
44
21
16
22
B435*4A0608M0002)
6 800 91,0 × 144,5 27
1 000 51,6 × 105,7 140
27
130
53
15
25
6,9
20
5,4
33
8,9
B435*4A0688M0002)
B435*4A5108M000
8,9
7,0
12
B435*4A5158M0002)
9,2
16
B435*4A5228M0002)
1 500 64,3 × 105,7
99
89
19
2 200 76,9 × 105,7
72
65
25
12
3 300 76,9 × 143,2
51
49
32
15
12
19
B435*4A5338M0002)
4 700 76,9 × 220,7
38
38
42
20
16
20
B435*4A5478M0002)
4 700 91,0 × 144,5
6 000 76,9 × 220,7
38
32
38
32
46
49
21
23
17
18
28
25
B435*4J5478M0002)
B435*4A5608M0002)
820 51,6 × 80,7 195
1 200 51,6 × 105,7 132
1 800 64,3 × 105,7 89
177
120
80
11,9
16,1
21,1
4,4
6,0
7,9
4,4
6,0
7,9
8,6
10,5
13,7
B435*4A6827M000
B435*4A6128M000
B435*4A6188M0002)
55
38
28,2
38,2
10,5
14,2
10,5
14,2
20,0
23,7
B435*4A6278M0002)
B435*4A6398M0002)
2 700 76,9 × 105,7
3 900 76,9 × 143,2
60
42
1) * “6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2) For 2-pad solution (types without threaded stud) and for low-inductance design, see page 136.
138 10/02
B43564 / B43584
Long Useful Life – 85 °C
Useful life
depending on ambient temperature TA (for natural cooling) and versus temperature of case base TB
(for base cooling) under ripple current operating conditions1)
UR = 350 … 450 V
KAL0529-Y
3,0
B43564/584
Ι~ ; Ι~
Ι ~ R Ι ~ R (B)
2,0
1,5
0
40
50
60
70
80
12 000 h
15 000 h
25 000 h
50 000 h
0,5
100 000 h
250 000 h
1,0
90
˚C 100
TA ; T B
UR = 500 V
KAL0530-2
3,0
B43564/584
Ι~ ; Ι~
Ι ~R Ι ~R (B)
2,0
1,5
0
40
50
60
70
12 000 h
25 000 h
50 000 h
100 000 h
0,5
250 000 h
1,0
80
90
˚C 100
TA; TB
1) The ripple current refers to I~R for natural cooling or to I~R(B) for base cooling, respectively.
Refer to page 40 for an explanation on how to interpret the useful life graphs.
139 10/02
B43564 / B43584
Long Useful Life – 85 °C
Frequency factor of
permissible ripple current I~
versus frequency f
KAL0398-T
1,5
Ι ~f
B43564/584
Ι ~100 Hz
1,3
c
b
1,2
a
1,1
1,0
0,9
0,8
10 2
5
5
d (mm)
51,6
64,3
76,9
91,0
Curve
c
b
a
c
d (mm)
51,6
64,3
76,9
91,0
Curve
c
b
a
a
10 3 Hz 2
f
Frequency characteristics of ESR
Typical behavior
KAL0396-C
1,5
B43564/584
ESR f
ESR 100 Hz
1,2
1,1
1,0
0,9
0,8
a
b
c
0,7
0,6
0,5
5
10 2
5
10 3 Hz 2
f
140 10/02
B43564 / B43584
Long Useful Life – 85 °C
Impedance Z
versus frequency f
Typical behavior at 20 °C
KAL0397-K
10 3
B43564/584
Ω
Z
10 2
4
10 1
4
10
1500 µF/250 V
15000 µF/160 V
0
4
10
_1
4
10
_2
10 1
10 2
10 3
10 4
10 5
10 6 Hz 10 7
f
141 10/02
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages