EPCOS B43566A5158Q000 Long-life grade capacitor Datasheet

Capacitors with Screw Terminals
B43566
Extended Useful Life – 85 °C
B43586
B43566, B43586
Long-life grade capacitors
Applications
■ Frequency converters
Features
■
■
■
■
Extended useful life, high reliability
Good electrical characteristics and small dimensions
Extremely high ripple current capability
All-welded construction ensures reliable
electrical contact
■ Version with optimized construction for base cooling
(2-pad solution) available
■ Version with low-inductance design available
■ Self-extinguishing electrolyt
Construction
■
■
■
■
■
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud and d ≤ 76,9 mm are
not insulated, types with d = 91 mm have fully insulated bases
142 10/02
KAL0567-B
B43566
B43586
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Specifications and characteristics in brief
Rated voltage UR
350 … 450 VDC
Surge voltage US
1,10 · UR
Rated capacitance CR
470 … 6 800 µF
Capacitance tolerance
– 10/+ 30 %
Leakage current IL
(5 min, 20 °C)
Self-inductance ESL
Q
C R U R 0,7
I L ≤ 0,3 µA ⋅ æè ------- ⋅ -------öø + 4 µA
µF V
d = 51,6 mm: approx. 15 nH
d = 76,9 mm: approx. 20 nH
d = 91,0 mm: approx. 20 nH
Capacitors with low-inductance design:
d ≥ 64,3 mm: approx. 13 nH
Requirements:
Useful life
85 °C; UR; I~R
40 °C; UR; 2 · I~R
> 24 000 h
> 250 000 h
∆C / C
ESR
IL
≤ ± 30 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure percentage: ≤ 1 %
Failure rate:
≤ 30 fit (≤ 30 · 10 –9/h)
(for definiton “fit”, rrefer to chapter “Quality”, page 62)
Post test requirements:
Voltage endurance test
∆C / C
ESR
IL
≤ ± 10 % of initial value
≤ 1,3 times initial specified limit
≤ initial specified limit
85 °C; UR; I~R
5 000 h
Vibration resistance
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 to 55 Hz,
acceleration max. 10 g, duration 3 × 2 h
IEC climatic category
To IEC 60068-1:
350 VDC:
40/085/56 (– 40 °C/+ 85 °C/56 days damp heat test)1)
≥ 400 VDC: 25/085/56 (– 25 °C/+ 85 °C/56 days damp heat test)
Detail specifications
Similar to CECC 30301-803, CECC 30301-807
Sectional specification
IEC 60384-4
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
51,6 mm
64,3 mm
76,9 mm
91,0 mm
I~max
30 A
40 A
50 A
70 A
1) For case dimensions 76,9 mm × 220,7 mm: IEC climatic category 25/085/56
143 10/02
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Dimensional drawings
Type B43566
Ring clip/clamp mounting
Type B43586
Threaded stud mounting
M5: min. reach of screw = 8 mm
M6: min. reach of screw = 12 mm*)
*) 8 mm for low-inductance design
Positive pole marking: +
The base of all types with threaded stud and d = 91 mm is fully insulated (the lengths l and l1 are
increased by 0,5 mm in these cases). For types with threaded stud and d ≤ 76 mm the base is not
insulated. Also refer to the notes on mounting given on page 168.
Dimensions and weights
Terminal
Dimensions (mm) with insulating sleeve
+0
d
I±1
I1 ± 1 I2 – 1 l3
d1
M5
M5
51,6+ 0/– 0,8 80,7
51,6+ 0/– 0,8 105,7
87,2
112,2
17
17
7,0+ 0,2/– 1
7,0+ 0,2/– 1
M 12 8,2
M 12 8,2
13,5
13,5
22,2
22,2
220
280
M5
64,3+ 0/– 0,8 105,7
112,2
17
7,0+ 0,2/– 1
M 12 8,2
13,5
28,5
440
M6
M6
M6
76,9+ 0/– 0,7 105,7
76,9+ 0/– 0,7 143,2
76,9+ 0/– 0,7 220,7
111,5
149,0
226,5
17
17
17
6,4+ 1,1/– 0,8 M 12 17,7
6,4+ 1,1/– 0,8 M 12 17,7
6,4+ 1,1/– 0,8 M 12 17,7
17,7
17,7
17,7
31,7
31,7
31,7
540
840
1300
M6
91,0+ 0/– 2
144,5
149,8
17
6,4+ 1,1/– 0,8 M 12 17,7
17,7
31,7
1200
d2 max d3 max a
Dimensions are also valid for 2-pad solution and low-inductance design.
Packing
For ecological reasons the packing is pure cardboard.
Capacitor diameter d
Packing units (pieces)
51,6 mm
64,3 mm
76,9 mm
91,0 mm
22
15
12
8
144 10/02
+ 0,2
– 0,4
Approx.
wt. (g)
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Special designs
■ Low-inductance design
■ 2-pad solution
Design for optimized connection of the capacitor to the heatsink when using base cooling.
This version is available for capacitors without threaded stud and for diameters ≥ 64,3 mm
(cf. I~R(B) in table “Technical data and ordering codes” and useful life graphs).
Thermopad
thickness
0,5 mm
0,2 mm
Heatsink
KAL0823-3-E
Ordering codes:
Design
Identification in 3rd
block of ordering code
Remark
Low inductance (13 nH)
2-pad solution
Q003
Q006
For capacitors with diameter d ≥ 64,3 mm
For capacitors with diameter d ≥ 64,3 mm and
without threaded stud
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
For terminals
Thread
Toothed
washers
Screws/Nuts
M5
A 5,1 DIN 6797
Cylinder-head screw M 5 × 8 DIN 84-4.8
M6
A 6,4 DIN 6797
Cylinder-head screw M 6 × 12 DIN 85-4.8
For mounting M 12
J 12,5 DIN 6797 Hex nut BM 12 DIN 439
The following must be ordered separately:
Ring clips
Clamps for capacitors with d ≥ 64,3 mm
Insulating parts
Maximum
torque
2
2,5 Nm
10
B44030 (cf. page 169)
B44030 (cf. page 173)
B44020 (cf. page 166)
145 10/02
Nm
Nm
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Overview of available types
UR (VDC)
350
CR (µF)
Case dimensions d × l (mm)
450
51,6 × 80,7
51,6 × 80,7
51,6 × 80,7
51,6 × 80,7
51,6 × 105,7
470
680
400
1 000
51,6 × 80,7
51,6 × 105,7
64,3 × 105,7
1 500
51,6 × 105,7
64,3 × 105,7
76,9 × 105,7
2 200
64,3 × 105,7
76,9 × 105,7
76,9 × 105,7
76,9 × 143,2
4 700
76,9 × 143,2
76,9 × 220,7
91,0 × 144,5
6 000
76,9 × 220,7
91,0 × 144,5
76,9 × 220,7
6 800
76,9 × 220,7
3 300
76,9 × 143,2
91,0 × 144,5
2 700
76,9 × 220,7
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
146 10/02
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Technical data and ordering codes
UR
CR
100 Hz
20 °C
VDC µF
350
400
450
Case
dimensions
d×l
mm
ESRmax
100 Hz
20 °C
mΩ
680 51,6 × 80,7 120
1 000 51,6 × 80,7 84
Zmax
10 kHz
20 °C
mΩ
I~max
100 Hz
40 °C
A
100
73
I~R(B) Ordering code1)
100 Hz
85 °C
A
I~max
100 Hz
85 °C
A
I ~R
100 Hz
85 °C
A
13
16
5,0
6,3
4,4
5,6
8,0
12
B435*6A4687Q000
B435*6B4108Q000
7,3
9,4
14
17
B435*6B4158Q000
B435*6A4228Q000 2)
1 500
2 200
51,6 × 105,7
64,3 × 105,7
59
43
52
39
21
28
8,3
11
3 300
76,9 × 105,7
32
29
33
13
12
21
B435*6A4338Q000 2)
4 700
76,9 × 143,2
25
23
44
17
15
27
B435*6A4478Q000 2)
6 000
6 000
76,9 × 220,7
91,0 × 144,5
22
23
21
22
50
51
20
20
18
18
25
32
B435*6B4608Q000 2)
B435*6J4608Q000 2)
6 800
76,9 × 220,7
20
19
50
22
19
28
B435*6B4688Q000 2)
470
51,6 × 80,7 325
290
10
4,0
3,5
6,2
B435*6A0477Q000
680
1 000
51,6 × 80,7 225
51,6 × 105,7 160
200
140
13
17
5,1
6,6
4,5
5,8
9,0
11
B435*6A0687Q000
B435*6A0108Q000
1 500
64,3 × 105,7 100
92
22
8,5
7,5
13
B435*6A0158Q000 2)
2 200
76,9 × 105,7
83
65
29
11
9,9
19
B435*6A0228Q000 2)
3 300
4 700
76,9 × 143,2
76,9 × 220,7
58
43
47
40
38
50
15
19
13
17
23
24
B435*6A0338Q000 2)
B435*6A0478Q000 2)
4 700
91,0 × 144,5
38
40
53
21
18
34
B435*6J0478Q000 2)
6 000
76,9 × 220,7
35
33
50
24
21
31
B435*6A0608Q000 2)
470 51,6 × 80,7 350
680 51,6 × 105,7 250
310
220
11
14
4,2
5,4
3,7
4,8
1 000
1 500
64,3 × 105,7 190
76,9 × 105,7 125
173
120
17
24
6,7
9,3
6,0
8,2
2 200
76,9 × 143,2
95
90
30
12
2 700
3 300
91,0 × 144,5
76,9 × 220,7
75
70
83
67
36
40
14
15
7,4
8,6
B435*6A5477Q000
B435*6A5687Q000
11
16
B435*6A5108Q000 2)
B435*6A5158Q000 2)
10
17
B435*6A5228Q000 2)
12
14
21
19
B435*6A5278Q000 2)
B435*6A5338Q000 2)
1) * “6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2) For 2-pad solution (types without threaded stud) and for low-inductance design, see page 145.
147 10/02
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Useful life
depending on ambient temperature TA (for natural cooling) and versus temperature of case base TB
(for base cooling) under ripple current operating conditions1)
KAL0531-A
3,5
B43566/586
Ι~ ; Ι~
Ι ~ R Ι ~ R (B)
2,5
2,0
18 000 h
1,5
0
40
50
60
70
24 000 h
50 000 h
100 000 h
0,5
150 000 h
250 000 h
1,0
80
90
˚C 100
TA ; T B
Frequency factor of
permissible ripple current I~
versus frequency f
Ι ~f
Ι ~100 Hz
KAL0407-W
1,4
B43566/586
1,2
c
b
a
1,1
1,0
0,9
0,8
5 10 2
5 10 3
5 10 4
d (mm)
51,6
64,3
76,9
91,0
Curve
c
b
a
c
Hz 10 5
f
1) The ripple current refers to I~R for natural cooling or to I~R(B) for base cooling, respectively.
Refer to page 40 for an explanation on how to interpret the useful life graphs.
148 10/02
B43566 / B43586
Extended Useful Life – 85 °C
KAL0567-B
Frequency characteristics of ESR
Typical behavior
KAL0404-7
1,3
B43566/586
ESR f
ESR 100 Hz
1,1
1,0
a
b
c
0,9
0,8
0,7
0,6
0,5
5 10 2
5 10 3
5 10 4
d (mm)
51,6
64,3
76,9
91,0
Curve
c
b
a
a
Hz 10 5
f
149 10/02
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages