EPCOS B43580A4828M000 Capacitors with screw terminal Datasheet

Capacitors with Screw Terminals
B43560
Compact – 105 °C
B43580
B43560, B43580
Long-life grade capacitors
Applications
■ Frequency converters
■ Traction
■ Highly professional power supplies
Features
■ Maximum reliability
■ Good thermal characteristics and
KAL0567-B
B43560
high ripple current capability
■ Long useful life
■ Wide temperature range
■ All-welded construction ensures reliable
electrical contact
■ Version with optimized construction for base cooling
(2-pad solution) available
■ Version with low-inductance design available
Construction
■
■
■
■
■
Charge-discharge proof, polar
Aluminum case with insulating sleeve
Poles with screw terminal connections
Mounting with ring clips, clamps or threaded stud
The bases of types with threaded stud and d ≤ 76,9 mm are
not insulated, types with d = 91 mm have fully insulated bases
150 10/02
B43580
B43560 / B43580
Compact – 105 °C
Specifications and characteristics in brief
Rated voltage UR
350 … 450 VDC
Surge voltage US
1,10 · UR (105 °C; UR ≤ 400 VDC, 85 °C; UR = 450 VDC)
Rated capacitance CR
2 200 … 15 000 µF
Capacitance tolerance
± 20 %
Leakage current IL
(5 min, 20 °C)
Self-inductance ESL
M
C R U R 0,7
I L ≤ 0,3 µA ⋅ æè ------- ⋅ ------- öø + 4 µA
µF V
d = 51,6 mm: approx. 15 nH
d ≥ 64,3 mm: approx. 20 nH
Capacitors with low-inductance design:
d ≥ 64,3 mm: approx. 13 nH
Requirements:
Useful life
105 °C; UR; I~R
85 °C; UR; I~R
40 °C; UR; 2,2 · I~R
> 6 000 h
> 20 000 h
> 250 000 h
∆C / C
ESR
IL
≤ ± 30 % of initial value
≤ 3 times initial specified limit
≤ initial specified limit
Failure percentage: ≤ 1 %
Failure rate:
≤ 20 fit (≤ 20 · 10 –9/h)
(for definiton “fit”, refer to chapter “Quality”, page 62)
Post test requirements:
Voltage endurance test
∆C / C
ESR
IL
≤ ± 10 % of initial value
≤ 1,3 times initial specified limit
≤ initial specified limit
105 °C; UR; I~R
2 000 h
Vibration resistance
To IEC 60068-2-6, test Fc:
displacement amplitude 0,75 mm, frequency range 10 to 55 Hz,
acceleration max. 10 g, duration 3 × 2 h
IEC climatic category
To IEC 60068-1:
40/105/56 (– 40 °C/+ 105 °C/56 days damp heat test)
Detail specifications
Similar to CECC 30301-803, CECC 30301-807
Sectional specification
IEC 60384-4
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
64,3 mm
76,9 mm
91,0 mm
I~max
40 A
50 A
70 A
151 10/02
B43560 / B43580
Compact – 105 °C
Dimensional drawings
Type B43560
Ring clip/clamp mounting
Type B43580
Threaded stud mounting
M5: min. reach of screw = 8 mm
M6: min. reach of screw = 12 mm*)
*) 8 mm for low-inductance design
Positive pole marking: +
The base of all types with threaded stud and d = 91 mm is fully insulated (the lengths l and l1 are
increased by 0,5 mm in these cases). For types with threaded stud and d ≤ 76 mm the base is not
insulated. Also refer to the notes on mounting given on page 168.
Dimensions and weights
Terminal
Dimensions (mm) with insulating sleeve
+0
d
I±1
I1 ± 1 I2 – 1 l3
d1
M5
M5
M5
64,3+ 0/– 0,8 105,7
64,3+ 0/– 0,8 130,7
64,3+ 0/– 0,8 143,2
112,2
137,2
149,7
17
17
17
7,0+ 0,2/– 1
7,0+ 0,2/– 1
7,0+ 0,2/– 1
M 12
M 12
M 12
8,2
8,2
8,2
13,5
13,5
13,5
28,5
28,5
28,5
440
570
640
M6
M6
M6
M6
M6
76,9+ 0/– 0,7
76,9+ 0/– 0,7
76,9+ 0/– 0,7
76,9+ 0/– 0,7
76,9+ 0/– 0,7
105,7
130,7
143,2
168,7
220,7
111,5
136,5
149,0
174,5
226,5
17
17
17
17
17
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
M 12
M 12
M 12
M 12
M 12
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
31,7
31,7
31,7
31,7
31,7
540
750
840
1000
1300
M6
M6
M6
M6
91,0+ 0/– 2
91,0+ 0/– 2
91,0+ 0/– 2
91,0+ 0/– 2
144,5
170,0
191,0
221,0
149,8
175,3
196,3
226,3
17
17
17
17
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
6,4+ 1,1/– 0,8
M 12
M 12
M 12
M 12
17,7
17,7
17,7
17,7
17,7
17,7
17,7
17,7
31,7
31,7
31,7
31,7
1200
1500
1700
1900
d2 max d3 max a
Dimensions are also valid for 2-pad solution and low-inductance design.
Packing (For ecological reasons the packing is pure cardboard.)
Capacitor diameter d
Packing units (pieces)
64,3 mm
76,9 mm
91,0 mm
15
12
8
152 10/02
+ 0,2
– 0,4
Approx.
wt. (g)
B43560 / B43580
Compact – 105 °C
Special designs
■ Low-inductance design
■ 2-pad solution
Design for optimized connection of the capacitor to the heatsink when using base cooling.
This version is available for capacitors without threaded stud and for diameters ≥64,3 mm
(cf. I~R(B) in table “Technical data and ordering codes” and useful life graphs).
Thermopad
thickness
0,5 mm
0,2 mm
Heatsink
KAL0823-3-E
Ordering codes:
Design
Identification in 3rd
block of ordering code
Remark
Low inductance (13 nH)
2-pad solution
M003
M006
For capacitors with diameter d ≥ 64,3 mm
For capacitors with diameter d ≥ 64,3 mm and
without threaded stud
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
For terminals
Thread
Toothed
washers
Screws/Nuts
M5
A 5,1 DIN 6797
Cylinder-head screw M 5 × 8 DIN 84-4.8
M6
A 6,4 DIN 6797
Cylinder-head screw M 6 × 12 DIN 85-4.8
For mounting M 12
J 12,5 DIN 6797 Hex nut BM 12 DIN 439
The following must be ordered separately:
Ring clips
Clamps for capacitors with d ≥ 64,3 mm
Insulating parts
Maximum
torque
2
Nm
2,5 Nm
10
Nm
B 44 030 (cf. page 169)
B 44 030 (cf. page 173)
B 44 020 (cf. page 166)
153 10/02
B43560 / B43580
Compact – 105 °C
Overview of available types
UR (VDC)
350
CR (µF)
Case dimensions d × l (mm)
2 200
2 700
400
450
64,3 × 105,7
64,3 × 130,7
64,3 × 130,7
76,9 × 130,7
76,9 × 130,7
76,9 × 168,7
91,0 × 144,5
64,3 × 105,7
3 300
3 900
76,9 × 105,7
4 700
64,3 × 143,2
76,9 × 105,7
6 000
76,9 × 130,7
6 800
76,9 × 143,2
91,0 × 144,5
91,0 × 191,0
8 200
91,0 × 144,5
91,0 × 170,0
76,9 × 220,7
91,0 × 221,0
10 000
76,9 × 220,7
91,0 × 221,0
12 000
15 000
76,9 × 220,7
91,0 × 221,0
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
154 10/02
B43560 / B43580
Compact – 105 °C
Technical data and ordering codes
Zmax
10 kHz
20 °C
mΩ
I~max
100 Hz
40 °C
A
I~max
100 Hz
85 °C
A
I ~R
100 Hz
105 °C
A
I~R(B) Ordering code1)2)
100 Hz
105 °C
A
2 700 64,3 × 105,7 69
3 900 76,9 × 105,7 48
55
38
27
35
21
27
8,5
11
15
22
B435*0A4278M000
B435*0A4398M000
4 700 64,3 × 143,2 40
4 700 76,9 × 105,7 40
32
32
40
39
31
30
13
13
21
25
B435*0A4478M000
B435*0C4478M000
6 000 76,9 × 130,7 31
25
47
36
15
27
B435*0A4608M000
6 800 76,9 × 143,2 27
22
50
40
17
29
B435*0A4688M000
8 200 91,0 × 144,5 23
18
61
48
20
35
B435*0A4828M000
10 000 76,9 × 220,7 19
15
50
50
24
34
B435*0A4109M000
15 000 91,0 × 221,0 12
400
2 200 64,3 × 105,7 84
10
68
70
24
70
19
31
7,8
48
14
B435*0A4159M000
B435*0A9228M000
3 300 64,3 × 130,7 56
4 700 76,9 × 130,7 40
45
32
32
41
25
32
10
13
17
24
B435*0A9338M000
B435*0A9478M000
6 800 91,0 × 144,5 27
8 200 91,0 × 170,0 23
22
18
56
65
43
50
18
21
32
35
B435*0A9688M000
B435*0A9828M000
8 200 76,9 × 220,7 23
12 000 91,0 × 221,0 15
18
12
50
70
50
65
22
27
31
43
B435*0C9828M000
B435*0A9129M000
2 200 64,3 × 130,7 84
3 300 76,9 × 130,7 56
68
45
26
35
20
27
8,4
11
14
20
B435*0A5228M000
B435*0A5338M000
4 700 76,9 × 168,7 40
32
45
35
15
24
B435*0A5478M000
4 700 91,0 × 144,5 40
32
46
36
15
27
B435*0C5478M000
6 000 76,9 × 220,7 31
25
50
44
18
27
B435*0A5608M000
6 800 91,0 × 191,0 27
22
61
47
20
32
B435*0A5688M000
8 200 91,0 × 221,0 23
18
70
54
22
35
B435*0A5828M000
UR
CR
100 Hz
20 °C
VDC µF
350
450
Case
ESRmax
dimensions 100 Hz
d×l
20 °C
mΩ
mm
1) * “6” = for capacitors with ring clip/clamp mounting
“8” = for capacitors with threaded stud
2) For 2-pad solution (types without threaded stud) and for low-inductance design, see page 153.
155 10/02
B43560 / B43580
Compact – 105 °C
Useful life
depending on ambient temperature TA (for natural cooling) and versus temperature of case base TB
(for base cooling) under ripple current operating conditions1)
KAL0545-F
3,5
B43560/580
Ι~ ; Ι~
Ι ~R Ι ~R (B)
2,5
2,0
1,5
70
80
90
6 000 h
20 000 h
60
150 000 h
50
50 000 h
0
40
250 000 h
0,5
500 000 h
1,0
100
˚C 110
TA; TB
Frequency factor of
permissible ripple current I~
versus frequency f
KAL0688-5
1,5
B43560/580
Ι ~f
Ι ~100 Hz
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6 1
10
5
10 2
5
10 3
Hz 10 4
f
1) The ripple current refers to I~R for natural cooling or to I~R(B) for base cooling, respectively.
Refer to page 40 for an explanation on how to interpret the useful life graphs.
156 10/02
B43560 / B43580
Compact – 105 °C
Frequency characteristics of ESR
Typical behavior
KAL0689-D
1,5
B43560/580
ESR f
ESR 100 Hz
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
0,5 1
10
5
10 2
5
10 3
Hz 10 4
f
Impedance Z
versus frequency f
Typical behavior at 20 °C
KAL0691-P
10 1
B43560/580
Ω
Z
10 0
3900 µF/350 V
15000 µF/350 V
6000 µF/450 V
4
10
_1
4
10
_2
4
10
_3
10 1
10 2
10 3
10 4
10 5 Hz 10 6
f
157 10/02
Herausgegeben von EPCOS AG
Unternehmenskommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet.
Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG
oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
++49 89 636 09, FAX (0 89) 636-2 26 89
(
 EPCOS AG 2002. Reproduction, publication and dissemination of this brochure and the information contained therein without
EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on the type in question please
also contact one of our Sales Offices.
Similar pages