EPCOS B43601A9107M002 Aluminum electrolytic capacitor Datasheet

Aluminum electrolytic capacitors
Snap-in capacitors
Series/Type:
B43601
Date:
November 2008
© EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Snap-in capacitors
B43601
Long useful life and ultra compact 85 °C
Long-life grade capacitors
Applications
Frequency converters
Uninterruptable power supplies
Switch-mode power supplies in industrial and entertainment
electronics
Features
Voltage derating (0.93 VR) enables 105 °C operation,
more details available upon request
Extremly high C/V product, ultra compact
Long useful life
High reliability
High ripple current capability
Different case sizes available for each capacitance value
RoHS-compatible
Construction
Charge/discharge-proof, polar
Aluminum case, fully insulated with PVC
Version with PET insulation available
Version with additional PET insulation cap on terminal side
available for insulating the capacitor from the PCB
Snap-in solder pins to hold component in place on PC-board
Minus pole marking on case surface
Minus pole not insulated from case
Overload protection by safety vent on the base
Terminals
Standard version with 2 terminals,
2 lengths available: 6.3 and 4.5 mm
3 terminals to ensure correct insertion: length 4.5 mm
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 20
B43601
Long useful life and ultra compact 85 °C
Specifications and characteristics in brief
Rated voltage VR
Surge voltage VS
Rated capacitance CR
Capacitance tolerance
200 ... 450 V DC
1.15 VR (for VR ≤ 250 V DC)
1.10 VR (for VR ≥ 400 V DC)
82 ... 2700 µF
±20% M
Leakage current Ileak
(5 min, 20 °C)
Self-inductance ESL
Approx. 20 nH
Useful life
85 °C; VR; IAC,R
40 °C; VR; 1.15 IAC,R
> 10000 h
> 250000 h
Voltage endurance test
85 °C; VR
5000 h
Vibration resistance
test
Characteristics at low
temperature
Requirements:
∆C/C
≤ ±30% of initial value
ESR
≤ 3 times initial specified limit
Ileak
≤ initial specified limit
Post test requirements:
∆C/C
≤ ±10% of initial value
ESR
≤ 1.3 times initial specified limit
Ileak
≤ initial specified limit
To IEC 60068-2-6, test Fc:
Displacement amplitude 0.35 mm, frequency range 10 Hz ... 55 Hz,
acceleration max. 5 g, duration 3 × 2 h.
Capacitor mounted by its body which is rigidly clamped to the work
surface.
Max. impedance
ratio
at 100 Hz
VR
≤ 250 V ≥ 400 V
Z -25 °C / Z 20 °C
Z -40 °C / Z 20 °C
4
7
7
12
IEC climatic category
To IEC 60068-1:
VR ≤ 250 V DC: 40/085/56 (40 °C/+85 °C/56 days damp heat test)
VR ≥ 400 V DC: 25/085/56 (25 °C/+85 °C/56 days damp heat test)
The capacitors can be operated in the temperature range of
40 °C to +85 °C but the impedance at 40 °C should be taken into
consideration.
Detail specification
Sectional specification
Similar to CECC 30301-811
IEC 60384-4
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 20
B43601
Long useful life and ultra compact 85 °C
Dimensional drawings
Snap-in capacitors with standard insulation (PVC or PET)
Snap-in terminals, length 6.3 ±1 mm. Also
available in a shorter version with a length of
4.5 1 mm. PET insulation is marked with
label "PET" on the sleeve.
Snap-in capacitors are also available with
3 terminals (length 4.5 1 mm). PET
insulation is marked with label "PET" on the
sleeve.
Dimensions (mm)
d +1
l ±2
22
25
22
30
22
35
22
40
22
45
22
50
25
25
25
30
25
35
25
40
25
45
25
50
25
55
Dimensions (mm)
d +1
l ±2
30
25
30
30
30
35
30
40
30
45
30
50
30
55
35
25
35
30
35
35
35
40
35
45
35
50
35
55
Approx.
weight (g)
Packing
units (pcs.)
9
12
15
18
20
24
13
17
19
22
25
29
32
160
160
160
160
160
160
130
130
130
130
130
130
130
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 20
Approx.
weight (g)
Packing
units (pcs.)
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
B43601
Long useful life and ultra compact 85 °C
Snap-in capacitors with PVC insulation and PET insulation cap on terminal side
Snap-in terminals, length 6.3 +1/1.4 mm.
Also available in a shorter version with a
length of 4.5 1.4 mm. PET insulation cap is
positioned under the insulation sleeve.
Snap-in capacitors are also available with
3 terminals (length 4.5 1.4 mm). PET
insulation cap is positioned under the
insulation sleeve.
Dimensions (mm)
d +1.4
l +2.2/2
22
25
22
30
22
35
22
40
22
45
22
50
25
25
25
30
25
35
25
40
25
45
25
50
25
55
Dimensions (mm)
d +1.4
l +2.2/2
30
25
30
30
30
35
30
40
30
45
30
50
30
55
35
25
35
30
35
35
35
40
35
45
35
50
35
55
Approx.
Packing
weight (g) units (pcs.)
9
12
15
18
20
24
13
17
19
22
25
29
32
Please read Cautions and warnings and
Important notes at the end of this document.
160
160
160
160
160
160
130
130
130
130
130
130
130
Page 5 of 20
Approx.
Packing
weight (g) units (pcs.)
17
23
29
36
41
46
53
22
29
36
41
56
70
81
80
80
80
80
80
80
80
60
60
60
60
60
60
60
B43601
Long useful life and ultra compact 85 °C
Packing of snap-in capacitors
For ecological reasons the packing is pure cardboard. Components can be withdrawn (in full or in
part) in the correct position for insertion.
Ordering codes for terminal styles and insulation features
Identification in 3rd block of ordering code
Snap-in capacitors
Terminal version
Insulation version
PVC
PET
PVC plus PET cap
Standard terminals 6.3 mm
M000
M060
M080
Short terminals 4.5 mm
M007
M067
M087
3 terminals 4.5 mm
M002
M062
M082
Ordering examples:
B43601A5107M007
B43601A5107M062
B43601A5107M080
}
}
}
snap-in capacitor with short terminals and standard PVC insulation
snap-in capacitor with 3 terminals and PET insulation
snap-in capacitor with standard terminals and PVC insulation with
additional PET insulation cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 20
B43601
Long useful life and ultra compact 85 °C
Overview of available types
VR (V DC)
200
250
400
450
Case dimensions d × l (mm)
CR (µF)
22 × 25
82
100
22 × 25
22 × 30
120
22 × 30
22 × 30
25 × 25
150
22 × 30
25 × 25
22 × 35
25 × 30
180
22 × 35
25 × 30
22 × 40
25 × 35
30 × 25
220
22 × 40
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
35 × 25
22 × 25
22 × 45
25 × 40
30 × 30
25 × 45
30 × 35
35 × 30
270
330
22 × 25
22 × 30
25 × 25
25 × 45
30 × 35
35 × 25
25 × 50
30 × 40
35 × 30
390
22 × 30
22 × 35
25 × 30
25 × 50
30 × 35
35 × 30
30 × 45
35 × 35
470
22 × 35
25 × 25
22 × 40
25 × 30
25 × 55
30 × 40
35 × 35
30 × 50
35 × 40
560
22 × 35
25 × 30
22 × 45
25 × 35
30 × 25
30 × 45
35 × 35
30 × 55
35 × 45
680
22 × 40
25 × 35
30 × 25
22 × 50
25 × 40
30 × 30
35 × 25
30 × 55
35 × 40
35 × 50
820
22 × 50
25 × 40
30 × 30
25 × 45
30 × 35
35 × 30
35 × 50
Please read Cautions and warnings and
Important notes at the end of this document.
Page 7 of 20
B43601
Long useful life and ultra compact 85 °C
VR (V DC)
200
250
400
450
Case dimensions d × l (mm)
CR (µF)
1000
25 × 45
30 × 35
35 × 25
25 × 55
30 × 40
35 × 30
1200
25 × 50
30 × 40
35 × 30
30 × 45
35 × 35
1500
30 × 45
35 × 35
30 × 55
35 × 40
1800
30 × 50
35 × 40
35 × 45
2200
35 × 45
35 × 55
2700
35 × 55
35 × 55
The capacitance and voltage ratings listed above are available in different cases upon request.
Other voltage and capacitance ratings are also available upon request.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 20
B43601
Long useful life and ultra compact 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 200 V DC
330
22 × 25
390
22 × 30
470
22 × 35
470
25 × 25
560
22 × 35
560
25 × 30
680
22 × 40
680
25 × 35
680
30 × 25
820
22 × 50
820
25 × 40
820
30 × 30
1000
25 × 45
1000
30 × 35
1000
35 × 25
1200
25 × 50
1200
30 × 40
1200
35 × 30
1500
30 × 45
1500
35 × 35
1800
30 × 50
1800
35 × 40
2200
35 × 45
2700
35 × 55
VR = 250 V DC
270
22 × 25
330
22 × 30
330
25 × 25
390
22 × 35
390
25 × 30
470
22 × 40
470
25 × 30
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
290
250
200
200
170
170
140
140
140
120
120
120
100
100
100
80
80
80
65
65
55
55
45
35
510
440
360
360
300
300
250
250
250
210
210
210
170
170
170
140
140
140
120
120
100
100
80
65
400
340
280
280
240
240
190
190
190
160
160
160
130
130
130
110
110
110
90
90
75
75
60
50
2.79
3.17
3.60
3.43
3.93
3.91
4.47
4.46
4.12
5.17
5.06
4.72
5.74
5.40
4.56
6.44
6.50
5.55
7.47
6.42
8.39
7.26
8.26
9.60
1.42
1.61
1.84
1.75
2.00
1.99
2.28
2.27
2.10
2.63
2.58
2.40
2.93
2.75
2.33
3.28
3.31
2.83
3.81
3.28
4.28
3.70
4.21
4.89
B43601A2337M0*#
B43601A2397M0*#
B43601A2477M0*#
B43601B2477M0*#
B43601A2567M0*#
B43601B2567M0*#
B43601A2687M0*#
B43601B2687M0*#
B43601C2687M0*#
B43601A2827M0*#
B43601B2827M0*#
B43601C2827M0*#
B43601A2108M0*#
B43601B2108M0*#
B43601C2108M0*#
B43601A2128M0*#
B43601B2128M0*#
B43601C2128M0*#
B43601A2158M0*#
B43601B2158M0*#
B43601A2188M0*#
B43601B2188M0*#
B43601A2228M0*#
B43601A2278M0*#
330
270
270
230
230
190
190
590
480
480
410
410
340
340
460
370
370
320
320
260
260
2.68
3.09
3.04
3.48
3.44
3.94
3.78
1.37
1.57
1.55
1.77
1.75
2.01
1.93
B43601E2277M0*#
B43601E2337M0*#
B43601F2337M0*#
B43601E2397M0*#
B43601F2397M0*#
B43601E2477M0*#
B43601F2477M0*#
Composition of ordering code
* = Insulation feature
#=
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Page 9 of 20
B43601
Long useful life and ultra compact 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 250 V DC
560
22 × 45
560
25 × 35
560
30 × 25
680
22 × 50
680
25 × 40
680
30 × 30
680
35 × 25
820
25 × 45
820
30 × 35
820
35 × 30
1000
25 × 55
1000
30 × 40
1000
35 × 30
1200
30 × 45
1200
35 × 35
1500
30 × 55
1500
35 × 40
1800
35 × 45
2200
35 × 55
VR = 400 V DC
100
22 × 25
120
22 × 30
150
22 × 30
150
25 × 25
180
22 × 35
180
25 × 30
220
22 × 40
220
25 × 35
220
30 × 25
270
22 × 45
270
25 × 40
270
30 × 30
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
160
160
160
130
130
130
130
110
110
110
90
90
90
75
75
60
60
50
40
290
290
290
240
240
240
240
200
200
200
160
160
160
140
140
110
110
90
75
220
220
220
180
180
180
180
150
150
150
130
130
130
110
110
85
85
70
60
4.42
4.28
3.91
4.99
4.86
4.49
3.88
5.49
5.11
4.73
6.35
6.21
5.23
6.99
5.93
8.20
6.84
7.71
8.94
2.25
2.18
1.99
2.54
2.48
2.29
1.98
2.80
2.61
2.41
3.24
3.16
2.66
3.56
3.02
4.18
3.49
3.93
4.56
B43601E2567M0*#
B43601F2567M0*#
B43601G2567M0*#
B43601E2687M0*#
B43601F2687M0*#
B43601G2687M0*#
B43601H2687M0*#
B43601E2827M0*#
B43601F2827M0*#
B43601G2827M0*#
B43601E2108M0*#
B43601F2108M0*#
B43601G2108M0*#
B43601E2128M0*#
B43601F2128M0*#
B43601E2158M0*#
B43601F2158M0*#
B43601E2188M0*#
B43601E2228M0*#
1090
900
720
720
600
600
490
490
490
400
400
400
1900
1590
1270
1270
1060
1060
870
870
870
710
710
710
1470
1220
980
980
820
820
670
670
670
550
550
550
1.68
1.92
2.15
2.15
2.44
2.46
2.78
2.82
2.69
3.17
3.22
3.11
0.86
0.98
1.09
1.10
1.24
1.25
1.42
1.44
1.37
1.61
1.64
1.58
B43601A9107M0*#
B43601A9127M0*#
B43601A9157M0*#
B43601B9157M0*#
B43601A9187M0*#
B43601B9187M0*#
B43601A9227M0*#
B43601B9227M0*#
B43601C9227M0*#
B43601A9277M0*#
B43601B9277M0*#
B43601C9277M0*#
Composition of ordering code
* = Insulation feature
#=
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Page 10 of 20
B43601
Long useful life and ultra compact 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 400 V DC
330
25 × 45
330
30 × 35
330
35 × 25
390
25 × 50
390
30 × 35
390
35 × 30
470
25 × 55
470
30 × 40
470
35 × 35
560
30 × 45
560
35 × 35
680
30 × 55
680
35 × 40
820
35 × 50
1000
35 × 55
VR = 450 V DC
82
22 × 25
100
22 × 30
120
22 × 30
120
25 × 25
150
22 × 35
150
25 × 30
180
22 × 40
180
25 × 35
180
30 × 25
220
22 × 50
220
25 × 40
220
30 × 30
220
35 × 25
270
25 × 45
270
30 × 35
270
35 × 30
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
330
330
330
280
280
280
230
230
230
190
190
160
160
130
110
580
580
580
490
490
490
410
410
410
340
340
280
280
240
190
450
450
450
380
380
380
320
320
320
270
270
220
220
180
150
3.66
3.56
3.19
4.08
3.87
3.85
4.58
4.67
4.38
5.25
4.78
6.06
5.44
6.30
7.11
1.87
1.81
1.63
2.08
1.97
1.96
2.33
2.38
2.23
2.67
2.44
3.09
2.77
3.21
3.63
B43601A9337M0*#
B43601B9337M0*#
B43601C9337M0*#
B43601A9397M0*#
B43601B9397M0*#
B43601C9397M0*#
B43601A9477M0*#
B43601B9477M0*#
B43601C9477M0*#
B43601A9567M0*#
B43601B9567M0*#
B43601A9687M0*#
B43601B9687M0*#
B43601A9827M0*#
B43601A9108M0*#
1320
1090
900
900
720
720
600
600
600
490
490
490
490
400
400
400
2320
1900
1590
1590
1270
1270
1060
1060
1060
870
870
870
870
710
710
710
1860
1520
1270
1270
1020
1020
850
850
850
700
700
700
700
570
570
570
1.58
1.82
1.99
1.99
2.31
2.32
2.61
2.63
2.61
3.03
3.00
3.01
2.83
3.42
3.46
3.48
0.80
0.92
1.01
1.01
1.17
1.18
1.33
1.34
1.33
1.54
1.53
1.53
1.44
1.74
1.76
1.77
B43601A5826M0*#
B43601A5107M0*#
B43601A5127M0*#
B43601B5127M0*#
B43601A5157M0*#
B43601B5157M0*#
B43601A5187M0*#
B43601B5187M0*#
B43601C5187M0*#
B43601A5227M0*#
B43601B5227M0*#
B43601C5227M0*#
B43601D5227M0*#
B43601A5277M0*#
B43601B5277M0*#
B43601C5277M0*#
Composition of ordering code
* = Insulation feature
#=
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Page 11 of 20
B43601
Long useful life and ultra compact 85 °C
Technical data and ordering codes
CR
100 Hz
20 °C
µF
Case
dimensions
d×l
mm
VR = 450 V DC
330
25 × 50
330
30 × 40
330
35 × 30
390
30 × 45
390
35 × 35
470
30 × 50
470
35 × 40
560
30 × 55
560
35 × 45
680
35 × 50
ESRtyp
100 Hz
20 °C
mΩ
ESRmax
100 Hz
20 °C
mΩ
Zmax
10 kHz
20 °C
mΩ
330
330
330
280
280
230
230
190
190
160
580
580
580
490
490
410
410
340
340
280
470
470
470
390
390
330
330
280
280
230
Composition of ordering code
* = Insulation feature
#=
0 = PVC insulation
6 = PET insulation
8 = PVC insulation with additional PET insulation
cap on terminal side
Please read Cautions and warnings and
Important notes at the end of this document.
IAC,max
100 Hz
60 °C
A
IAC,R
100 Hz
85 °C
A
Ordering code
(composition see
below)
3.88
4.20
3.85
4.70
4.33
5.29
4.91
5.91
5.51
6.22
1.98
2.14
1.96
2.39
2.21
2.70
2.50
3.01
2.81
3.17
B43601A5337M0*#
B43601B5337M0*#
B43601C5337M0*#
B43601A5397M0*#
B43601B5397M0*#
B43601A5477M0*#
B43601B5477M0*#
B43601A5567M0*#
B43601B5567M0*#
B43601A5687M0*#
Terminal style
0 = snap-in standard terminals (6.3 mm)
2 = snap-in 3 terminals (4.5 mm)
7 = snap-in short terminals (4.5 mm)
Page 12 of 20
B43601
Long useful life and ultra compact 85 °C
Useful life
depending on ambient temperature TA under ripple current operating conditions1)
Voltage derating (0.93 VR) enables 105 °C operation
Frequency factor of permissible ripple
current IAC versus frequency f
Frequency characteristics of ESR
Typical behavior
1) Refer to chapter "General technical information, 5.3 Calculation of useful life" for an explanation on how to interpret the useful life
graphs.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 20
B43601
Long useful life and ultra compact 85 °C
Impedance Z versus frequency f
Typical behavior at 20 °C
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 20
B43601
Long useful life and ultra compact 85 °C
Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 20
B43601
Long useful life and ultra compact 85 °C
Product safety
The table below summarize the safety instructions that must be observed without fail. A detailed
description can be found in the relevant sections of chapter "General technical information".
Topic
Safety information
Polarity
Make sure that polar capacitors are connected
with the right polarity.
Reverse voltage
Voltages polarity classes should be prevented by
connecting a diode.
Do not exceed the upper category temperatur.
Upper category
temperature
Maintenance
Mounting
position of screw
terminal capacitors
Mounting of
single-ended
capacitors
Robustness of
terminals
Soldering
Make periodic inspections of the capacitors.
Before the inspection, make sure that the power
supply is turned off and carefully discharge the
electricity of the capacitors.
Do not apply any mechanical stress to the
capacitor terminals.
Do not mount the capacitor with the terminals
(safety vent) upside down.
Reference
Chapter "General
technical information"
1
"Basic construction of
aluminum electrolytic
capacitors"
3.1.6
"Reverse voltage"
7.2
"Maximum permissible
operating temperature"
10
"Maintenance"
11.1
"Mounting positions of
capacitors with screw
terminals"
The internal structure of single-ended capacitors 11.4
might be damaged if excessive force is applied to "Mounting
the lead wires.
considerations for
Avoid any compressive, tensile or flexural stress. single-ended capacitors"
Do not move the capacitor after soldering to PC
board.
Do not pick up the PC board by the soldered
capacitor.
Do not insert the capacitor on the PC board with a
hole space different to the lead space specified.
The following maximum tightening torques must
11.3
not be exceeded when connecting screw
"Mounting torques"
terminals:
M5: 2 Nm
M6: 2.5 Nm
Do not exceed the specified time or temperature 11.5
limits during soldering.
"Soldering"
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 20
B43601
Long useful life and ultra compact 85 °C
Topic
Soldering,
cleaning agents
Passive
flammability
Active
flammability
Safety information
Reference
Chapter "General
technical information"
Do not allow halogenated hydrocarbons to come 11.6
into contact with aluminum electrolytic capacitors. "Cleaning agents"
Avoid external energy, such as fire or electricity.
8.1
"Passive flammability"
Avoid overload of the capacitors.
8.2
"Active flammability"
Breakdown strength Do not damage the insulating sleeve, especially
of insulating
when ring clips are used for mounting.
sleeves
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 20
Reference
Chapter "Capacitors
with screw terminals"
"Screw terminals accessories"
B43601
Long useful life and ultra compact 85 °C
Symbols and terms
Symbol
English
German
C
CR
CS
CS,T
Cf
d
dmax
ESL
ESR
ESRf
Capacitance
Rated capacitance
Series capacitance
Series capacitance at temperature T
Capacitance at frequency f
Case diameter, nominal dimension
Maximum case diameter
Self-inductance
Equivalent series resistance
Equivalent series resistance at
frequency f
Equivalent series resistance at
temperature T
Frequency
Current
Alternating current (ripple current)
Root-mean-square value of alternating
current
Ripple current at frequency f
Maximum permissible ripple current
Rated ripple current
Rated ripple current for base cooling
Leakage current
Operating leakage current
Case length, nominal dimension
Maximum case length (without
terminals and mounting stud)
Resistance
Insulation resistance
Balancing resistance
Temperature
Temperature difference
Ambient temperature
Case temperature
Capacitor base temperature
Time
Period
Service life (operating hours)
Kapazität
Nennkapazität
Serienkapazität
Serienkapazität bei Temperatur T
Kapazität bei Frequenz f
Gehäusedurchmesser, Nennmaß
Maximaler Gehäusedurchmesser
Eigeninduktivität
Ersatzserienwiderstand
Ersatzserienwiderstand bei Frequenz f
ESRT
f
I
IAC
IAC,rms
IAC,f
IAC,max
IAC,R
IAC,R (B)
Ileak
Ileak,op
l
lmax
R
Rins
Rsymm
T
∆T
TA
TC
TB
t
∆t
tb
Please read Cautions and warnings and
Important notes at the end of this document.
Ersatzserienwiderstand bei Temperatur T
Frequenz
Strom
Wechselstrom
Wechselstrom, Effektivwert
Wechselstrom bei Frequenz f
Maximal zulässiger Wechselstrom
Nennwechselstrom
Nennwechselstromstrom für Bodenkühlung
Ableitstrom
Ableitstrom bei Betrieb
Gehäuselänge, Nennmaß
Maximale Gehäuselänge (ohne Anschlüsse
und Gewindebolzen)
Widerstand
Isolationswiderstand
Symmetrierwiderstand
Temperatur
Temperaturdifferenz
Umgebungstemperatur
Gehäusetemperatur
Temperatur des Becherbodens
Zeit
Zeitraum
Brauchbarkeitsdauer (Betriebszeit)
Page 18 of 20
B43601
Long useful life and ultra compact 85 °C
Symbol
V
VF
Vop
VR
VS
XC
XL
Z
ZT
tan δ
λ
ε0
εr
ω
English
Voltage
Forming voltage
Operating voltage
Rated voltage, DC voltage
Surge voltage
Capacitive reactance
Inductive reactance
Impedance
Impedance at temperature T
Dissipation factor
Failure rate
Absolute permittivity
Relative permittivity
Angular velocity; 2 π f
German
Spannung
Formierspannung
Betriebsspannung
Nennspannung, Gleichspannung
Spitzenspannung
Kapazitiver Blindwiderstand
Induktiver Blindwiderstand
Scheinwiderstand
Scheinwiderstand bei Temperatur T
Verlustfaktor
Ausfallrate
Elektrische Feldkonstante
Dielektrizitätszahl
Kreisfrequenz; 2 π f
Notes
All dimensions are given in mm.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 20
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
Page 20 of 20
Similar pages