EPCOS B65805-N315-A48

RM Cores
Series/Type:
RM 5
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
B65805C0000R026
B65805J0000Y042
B65806K1004D002
B65539C1003X101
B65806A50000000
B65806A3002X022
B65539C1002X101
B65805C0000R048
B65805J0000Y066
B65806K1006D002
B65539C1003X001
B65806C3001X022
B65539C1003X001
Date of
Withdrawal
2002-08-02
2002-08-02
2003-08-08
2004-01-23
2004-10-18
2003-08-08
2003-08-08
Deadline Last
Orders
2002-12-31
2002-12-31
2004-02-29
Last Shipments
2005-03-31
2004-02-29
2004-02-29
2005-09-30
2004-08-31
2004-08-31
2003-03-31
2003-03-31
2004-08-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
RM 5
Core
B65805
■ In accordance with IEC 60431
■ Core without center hole
for transformer applications
■ RM cores are supplied in sets
Magnetic characteristics (per set)
Σl/A
le
Ae
A min
Ve
with
center hole
without
center hole
1,0
20,8
20,8
—
430
0,93
22,1
23,8
18
526
mm–1
mm
mm2
mm2
mm3
3,0
g
Approx. weight (per set)
m
2,9
Gapped
Material
AL value
nH
K1
M33
N48
s
approx.
mm
µe
Ordering code1)
-C with center hole
-N with threaded sleeve
25 ± 3 %
1,0
19,9
B65805-+25-A1
40 ± 3 %
0,40
31,8
B65805-+40-A1
63 ± 3 %
0,4
50,2
B65805-+63-A33
100 ± 3 %
0,2
79,6
B65805-+100-A33
160 ± 3 %
0,12
128
B65805-+160-A48
250 ± 3 %
0,06
200
B65805-+250-A48
315 ± 3 %
0,03
255
B65805-+315-A48
1) Replace the + by the code letter “C” or “N” for the required version.
194 08/01
RM 5
Core
B65805
Ungapped
Material
A L value
µe
nH
A L1min PV
nH
W/set
Ordering code
-C with center hole
-J w/o center hole
N26
1800 + 30/– 20 % 1430
B65805-C-R26
T57 1)
2600 + 30/– 20 % 1920
B65805-J-R57
N30
3500 + 30/– 20 % 2590
B65805-J-R30
T38
6700 + 40/– 30 % 4960
B65805-J-Y38
T42
9600 + 40/– 30 % 7090
N49
1300 + 30/– 20 %
960
810
B65805-J-Y42
N87
2000 + 30/– 20 % 1470
1200
B65805-J-R87
< 0,32
(200 mT, 100 kHz, 100 °C)
N97 1)
2000 + 30/– 20 % 1470
1200
< 0,24
B65805-J-R97
(200 mT, 100 kHz, 100 °C)
N41
2600 + 30/– 20 % 1920
1200
B65805-J-R41
< 0,10
(200 mT, 100 kHz, 100 °C)
< 0,06
(50 mT, 500 kHz, 100 °C)
1) Preliminary data
195 08/01
B65805-J-R49
RM 5
Accessories
B65806
Coil former
Material:
GFR thermosetting plastic (UL 94 V-0, insulation class to IEC 60085:
H max. operating temperature 180 °C), color code blue
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
Winding:
see “Processing Notes”, page 153
Pins squared in the start-of-winding area
For matching clamps and insulating washers see page 197
Sections
AN
mm2
lN
mm
A R value
µΩ
Pins
Ordering code
1
9,5
25
90
4
5
6
8
B65806-K1004-D1
B65806-K1005-D1
B65806-K1006-D1
B65806-K1008-D1
2
8,7
25
94
4
5
6
B65806-K1004-D2
B65806-K1005-D2
B65806-K1006-D2
4 pins
5 and 6 pins
4 Sti te
8 pins
5 und 6 Sti te
0,7+
0
8 Sti te
5
2
2
5
*)
4
6,95 _ 0,1
5±0,3
0,75±0,05
6,15 _ 0,1
*)
4 is omitted
* ) Pin
Bei Ausführung
mit
in
5-pinentfällt
version.
5 Stiften
Stift 4
3
ø10,1_ 0,1
0,49±0,05
3
ø5,95 _ 0,1
0,45 max.
0,52±0,05
5
ø0,52 max.
Hole arrangement
Lochgruppen
Ansicht inView
Montagerichtung
in mounting
direction
*)
ø1+0,1
2,54
6,9 _ 0,1
1
6,1_ 0,1
0,1
5+
6
6
0,7+
0,05
,05
Erdungspunkte
ø1,3+0,1
Ground
Ø 1,3+0,1
196 08/01
FRM0278-J
60
_ 10
FRM0278-J
RM 5
Accessories
B65806
Clamp
■ With ground terminal, made of stainless spring steel (tinned), 0,335 mm thick
■ Solderability to IEC 60068-2-20, test Ta, method 1 (aging 3): 235 °C, 2 s
■ Also available as strip clamp on reels
Insulating washer 1 between core and coil former
■ For tolerance compensation and for insulation
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,06 mm thick
Insulating washer 2 for double-clad PCBs
■ Made of polycarbonate (UL 94 V-0, insulation class to IEC 60085: E
120 °C), 0,3 mm thick
Clamp (ordering code per piece, 2 are required)
B65806-A2203
Ordering code
Insulating washer 1 (reel packing, PU = 1 reel)
B65806-A5000
Insulating washer 2 (bulk)
B65806-D2005
Insulating washer 1
Insulating washer 2
8,3+0,15
2,4 max.
_ 0,3
4,5 +0,1
0,55 _ 0,15
9,3+0,2
0,55 _ 0,15
Clamp
0,7
FRM0012-J
Clamping forces for RM 5
Fmin: Extension of clamp from a to a2 = Xmin
Fmax: Extension of clamp from a to a1 = Xmax
Clamp opening a (mm)
8,3 + 0,15
Core nose Zmax (mm)
0,15
Height of core pair X (mm) X min
X max
8,75
9,25
Clamping force F (N)
197 08/01
Fmin
Fmax
5
40
RM 5
B65822
Accessories
B65806
SMD coil former with gullwing terminals
Material:
GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
permissible soldering temperature for wire-wrap connection on coil former: 400 °C, 1 s
Winding:
see “Processing Notes”, page 160
Clamp
■ Without ground terminal, made of stainless spring steel, 0,335 mm thick
■ Also available as strip clamp (each carton containing 2 reels) on request
A R value
µΩ
Sections
AN
mm2
1
11,1
25
77
8
B65822-F1008-T1
2
10,2
25
85
8
B65822-F1008-T2
Terminals
(ordering code per piece, 2 are required)
B65806-J2204
Coil former
Clamp
ø10,1_ 0,2
ø6 _ 0,15
9,3
0,55 _ 0,15
6,2 _ 0,2
19 _ 0,2
8
1
8
2
7
2
7
3
6
3
6
4
5
4
5
14,2 _ 0,2
1
11,43
1,2
6
Recommended
PCB layout
3,81
3,81
0,6
13,4 _ 0,25
0,4±0,05
8,9±0,2
0,3
0,4±0,05
ø5+0,15
0,55±0,05
2
2 sections
0,55 _ 0,15
1 section
3 x 3,81 = 11,43
Ordering code
2,5
20,3
FRM0296-H
198 08/01
2,1±0,1
8,3+0,15
Clamp
lN
mm
FRM0025-G
RM 5
B65822
Accessories
B65806
SMD coil former with J terminals
Material:
GFR liquid crystal polymer (UL 94 V-0, insulation class to IEC 60085:
F max. operating temperature 155 °C), color code black
Solderability: to IEC 60068-2-20, test Ta, method 1 (aging 3): 350 °C, 1 s
Resistance to soldering heat: to IEC 60068-2-20, test Tb, method 1B: 350 °C, 3,5 s
permissible soldering temperature for wire-wrap connection on coil former: 400 °C, 1 s
Winding:
see “Processing Notes”, page 160
Clamp
■ Without ground terminal, made of stainless spring steel, 0,335 mm thick
■ Also available as strip clamp (each carton containing 2 reels) on request
Sections
1
Clamp
AN
mm2
lN
mm
A R value
µΩ
Terminals
Ordering code
11,1
25
73
8
B65822-J1008-T1
(ordering code per piece, 2 are required)
B65806-J2204
Coil former
9,8±0,1
0,55 _ 0,15
1,2
Clamp
5
5+0,15
13,5 _ 0,2
8,3+0,15
0,45±0,05
9,3
0,55 _ 0,15
11,43
6
4
1,5
3
3,81
7
15,0 _ 0,2
2
Recommended
PCB layout
1,7
10,1_ 0,1
1
8
0,6
0,6
3x3,81 = 11,43±0,1
18,6 _ 0,2
6+0,3
0,75±0,05
0,3
2,8
15,6 _ 0,5
3,81±0,1
2,1±0,1
1,5
2 _ 0,15
ø5,95 _ 0,15
6,15 _ 0,1
7,1±0,1
2
16
FRM0297-Q
199 08/01
FRM0025-G
RM 5
B65539
Accessories
B63399, B65806
Adjusting screw
■ Tube core with thread and core brake made of GFR polyterephthalate
Plastic adjusting screwdriver (not shown)
Plastic handle for adjusting screwdriver (not shown)
Core RM 5
Adjusting screw
Fig.
Material
AL value
nH
Tube core
∅ × length
mm
Material
Color
code
Min.
adjusting
range
Ordering code
%
25
a
1,81 × 2,0
Si 1
black
13
B65539-C1003-X101
40
a
1,81 × 2,0
K1
yellow
16
B65539-C1003-X1
M 33
63
a
1,81 × 2,7
Si 1
white
11
B65539-C1002-X101
100
a
1,81 × 2,0
K1
yellow
14
B65539-C1003-X1
N 48
160
a
1,81 × 2,7
N 22
red
15
B65539-C1002-X22
250
315
b
1,81 × 3,4
N 22
green
13
9
B65806-C3001-X22
315
b
1,90 × 3,4
N 22
blue
12
B65806-A3002-X22
K1
Adjusting screwdriver
B63399-B4
Handle
B63399-B5
Adjusting screws
a
b
200 08/01
Herausgegeben von EPCOS AG
Marketing Kommunikation, Postfach 80 17 09, 81617 München, DEUTSCHLAND
 EPCOS AG 2000. Alle Rechte vorbehalten. Vervielfältigung, Veröffentlichung, Verbreitung und
Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG
nicht gestattet.
Mit den Angaben in dieser Broschüre werden die Bauelemente spezifiziert, keine Eigenschaften
zugesichert. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen
für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird.
Diese Broschüre ersetzt die vorige Ausgabe.
Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland.
Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte
darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen.
Published by EPCOS AG
Marketing Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited.
The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for
the Supply of Products and Services of the Electrical and Electronics Industry recommended by the
ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
1