EPCOS B7671 Saw duplexer cellular / wcdma band v Datasheet

SAW Components
SAW Duplexer
Cellular / WCDMA Band V
Series/type:
Ordering code:
B7671
B39881B7671A710
Date:
Version:
September 23, 2009
2.0
 EPCOS AG 2009. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Application
■ Multimode SAW duplexer for mobile telephone
Cellular / WCDMA Band V systems
■ Low insertion attenuation
■ Low amplitude ripple
■ Single ended to balanced transformation
in Antenna - Rx path
■ Impedance transformation 50Ω to 100Ω
in Antenna - Rx path
6
7
3 2
1
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
9
8
4
0.3
5
0.4
0.4
0.55
■ Package size 2.5 x 2.0 x 0.68 mm3
■ RoHS compatible
■ Package for Surface Mount Technology
bottom view
0.4
Features
0.68
0.9
side view
2.0
2.5
top view
Pin configuration
■
■
■
■
3
1, 8
6
2, 4, 5, 7, 9
TX Input
RX Output (balanced)
Antenna
To be grounded
1
3
8
4,5,9
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
2
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX = 100 Ω (balanced)
ZTX =
50 Ω
Characteristics TX - ANT
min.
Center frequency
fC
Maximum insertion attenuation
824.0 ... 849.0
typ.
@ 25 ˚C
836.5
max.
1.7
2.2
dB
1.6
2.0
dB
0.5
1.0
dB
0.4
0.8
dB
1.4
2.5
%
MHz
αmax
MHz
αWCDMA1)
∆α
@fCarrier 826.4
...
846.6
MHz
Amplitude ripple
824.0
...
849.0
MHz
@fCarrier 826.4
...
846.6
MHz
αWCDMA
Error Vector Magnitude
@fCarrier 826.4 ...
846.6
MHz
EVM2)
Input VSWR (TX port)
824.0 ...
849.0
MHz
1.9
2.2
Output VSWR (ANT port)
824.0 ... 849.0
MHz
1.7
2.0
1)
2)
1)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
3
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX = 100 Ω (balanced)
ZTX =
50 Ω
Characteristics TX - ANT
Absolute attenuation
10.0
420.0
494.0
701.0
728.0
764.0
860.0
869.0
1574.0
1638.0
1844.9
1884.5
1930.0
2110.0
2400.0
3286.0
4110.0
4934.0
5725.0
min.
typ.
@ 25 ˚C
30
35
30
30
30
30
4
44
40
20
30
30
35
33
30
20
20
15
6
42
39
33
34
34
36
16
50
45
48
49
48
45
41
35
28
25
22
10
max.
α
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
420.0
494.0
701.0
728.0
764.0
804.0
869.0
894.0
1577.0
1708.0
1879.9
1919.6
1990.0
2170.0
2557.0
3406.0
4255.0
5350.0
5953.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Please read cautions and warnings and
important notes at the end of this document.
4
September 23, 2009
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX = 100 Ω (balanced)
ZTX =
50 Ω
Characteristics ANT - RX
min.
typ.
@ 25 ˚C
881.5
max.
MHz
2.2
2.7
dB
1.9
2.4
dB
Center frequency
fC
Maximum insertion attenuation
869.0 ... 894.0
MHz
αmax
@fCarrier 871.4
...
891.6
Amplitude ripple
869.0
...
894.0
MHz αWCDMA1)
∆α
MHz
0.8
1.6
dB
@fCarrier 871.4
...
891.6
MHz αWCDMA1)
0.4
1.0
dB
Input VSWR (ANT port)
869.0 ...
894.0
MHz
1.5
1.8
Output VSWR (RX port)
869.0 ...
894.0
MHz
1.7
2.0
Common mode rejection ratio
869.0 ... 894.0
1)
2)
MHz CMRR
232)
30
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
A combination of 10 ˚ phase balance and 1 dB amplitude balance corresponds to 19.6 dB CMRR
Please read cautions and warnings and
important notes at the end of this document.
5
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX = 100 Ω (balanced)
ZTX =
50 Ω
Characteristics ANT - RX
min.
IMD product level limits1)
at fTX = 836.5 MHz fRX = 881.5 MHz
Blocker 1
45.0 MHz
Blocker 2
791.5 MHz
Blocker 3
1718.0 MHz
-127
-89
-114
max.
dBm
dBm
dBm
α
Attenuation
10.0
447.0
824.0
849.0
909.0
1000.0
1850.0
1920.0
1)
typ.
@ 25 ˚C
...
...
...
...
...
...
...
...
447.0
824.0
849.0
854.0
1000.0
1850.0
1920.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
45
35
45
10
7
28
40
35
60
55
54
35
10
45
50
40
dB
dB
dB
dB
dB
dB
dB
dB
IMD product level limits for power levels PTX=21dBm (antenna port output power) and PBlocker= 15dBm (antenna port input power)
Please read cautions and warnings and
important notes at the end of this document.
6
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –20 ˚C to +85 ˚C
ZANT= 50 Ω ll 8.2 nH
ZRX = 100 Ω (balanced)
ZTX =
50 Ω
Characteristics TX - RX
min.
typ.
@ 25 ˚C
max.
Isolation
824.0
...
849.0
MHz
54
56
dB
@fCarrier 826.4
...
846.6
55
57
dB
869.0
...
894.0
MHz αWCDMA1)
MHz
48
51
dB
@fCarrier 871.4
...
891.6
MHz αWCDMA1)
MHz
MHz
MHz
48
40
20
20
52
67
65
62
dB
dB
dB
dB
MHz
MHz αWCDMA1)
50
50
54
57
dB
dB
1574.0 ... 1577.0
1638.0 ... 1708.0
2462.0 ... 2557.0
Common Mode Isolation
824.0 ... 849.0
@fCarrier 826.4 ... 846.6
1)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (8).
Please read cautions and warnings and
important notes at the end of this document.
7
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Maximum ratings
Operable temperature range1)
Storage temperature range
DC voltage
ESD voltage
Input power at
824.0 ... 849.0 MHz
elsewhere
T
Tstg
VDC
VESD
PIN
–30/+85
–40/+85
5
1002)
˚C
˚C
V
V
29
10
machine model, 10 pulses
source and load impedance 50 Ω
continuous wave
T = 50˚C, 5.000 h
}
dBm
dBm
1)
Defines the temperature range in which the SAW device keeps its typical characteristics, however the
specification values are not guaranteed.
2)
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
∫∞ Sds 21 ( f )HRRC ( f – f Carrier )
2
df
fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 5-Passband, fCarrier ranges from
826.4 MHz (lowest Tx channel) to 846.6 MHz (highest Tx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the
following normalization:
∞
∫∞ HRRC ( f )
Please read cautions and warnings and
important notes at the end of this document.
8
2
df = 1
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Frequency Response TX-ANT (passband)
Frequency Response TX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Frequency Response RX-ANT (Passband)
Frequency Response RX-ANT (Wideband)
Please read cautions and warnings and
important notes at the end of this document.
10
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
Frequency Response TX-RX (Isolation)
Frequency Response TX-RX (Wideband)
Please read cautions and warnings and
important notes at the end of this document.
11
September 23, 2009
SAW Components
B7671
836.50 / 881.50 MHz
SAW Duplexer
Data Sheet
References
Type
B7671
Ordering code
B39881B7671A710
Marking and package
C61157-A3-A61
Packaging
F71074-V8153-Z000
Date codes
L_1126
B7671_NB.s4p
S-parameters
B7671_WB.s4p
see file header for pin/port assignments.
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2009. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
12
September 23, 2009
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap,
SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K,
ThermoFuse, WindCap are trademarks registered or pending in Europe and in other
countries. Further information will be found on the Internet at www.epcos.com/trademarks.
13
September 23, 2009
Similar pages