EPCOS B7678 Saw duplexer lte band 13 Datasheet

SAW Components
SAW Duplexer
LTE Band 13
Series/type:
B7678
B39781B7678A710
Date:
Version:
January 24, 2011
2.1
 EPCOS AG 2011. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
Application
■ Low-loss SAW duplexer for mobile telephone
LTE Band 13 systems
Low insertion attenuation
Low amplitude ripple
Usable passband 10 MHz
Very small size and low height
Features
0.55
0.4
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Moisture Level Sensitivity 3
3
0.4
2
4
0.3
1
9
6
7
5
0.68
0.9
bottom view
0.4
■ Package size 2.5 x 2.0 x 0.68 mm3
■ RoHS compatible
■ Package for Surface Mount Technology
8
■
■
■
■
side view
2.5
6
5
4
8
2.0
7
1
2
top view
3
Pin configuration
■
■
■
■
■
3
1
6
2,4,5
7,8,9
16
TX Input
RX Output
Antenna
To be grounded
To be grounded
32
2,7,81,3
4,5,9
5,7,8
64
Please read cautions and warnings and
important notes at the end of this document.
2
January 24, 2011
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω || 18 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs TX - ANT
min.
Center frequency
fC
typ.
@ 25 ˚C
782.0
max.
MHz
Maximum insertion attenuation
777.0 ... 787.0
MHz
α
—
1.9
2.4
dB
Amplitude ripple (p-p)
777.0 ...
787.0
MHz
∆α
—
0.5
1.3
dB
Input VSWR (TX port)
777.0 ...
787.0
MHz
—
1.5
2.0
Output VSWR (ANT port)
777.0 ... 787.0
MHz
—
1.5
2.0
40
35
30
35
47
30
30
35
35
35
45
35
35
35
30
30
20
5
60
47
42
50
57
32
43
45
49
50
51
51
50
48
40
41
24
12
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
10.0
150.0
350.0
728.0
746.0
758.0
808.0
869.0
1452.0
1554.0
1574.0
1670.0
1930.0
2110.0
2300.0
2361.0
3300.0
5150.0
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
150.0
350.0
650.0
746.0
756.0
768.0
818.0
894.0
1492.0
1574.0
1577.0
1675.0
1990.0
2170.0
2361.0
2690.0
3800.0
5850.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Please read cautions and warnings and
important notes at the end of this document.
3
January 24, 2011
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω || 18 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs ANT - RX
min.
Center frequency
fC
typ.
@ 25 ˚C
751.0
max.
MHz
Maximum insertion attenuation
746.0 ... 756.0
MHz
α
—
2.1
2.6
dB
Amplitude ripple (p-p)
746.0 ...
756.0
MHz
∆α
—
0.5
1.2
dB
Input VSWR (ANT port)
746.0 ...
756.0
MHz
—
1.6
2.0
Output VSWR (RX port)
746.0 ...
756.0
MHz
—
1.6
2.0
150.0
350.0
650.0
716.0
722.0
787.0
818.0
849.0
1543.0
1574.0
1577.0
1770.0
1980.0
2690.0
3800.0
5850.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
40
35
30
35
35
51
35
30
32
35
35
35
35
35
25
5
60
47
39
40
43
59
42
40
38
38
38
39
39
38
30
11
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
10.0
150.0
350.0
698.0
716.0
777.0
788.0
824.0
1492.0
1554.0
1574.0
1710.0
1920.0
2200.0
2690.0
5150.0
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
Please read cautions and warnings and
important notes at the end of this document.
4
January 24, 2011
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
TX terminating impedance:
T = –30 ˚C to +85 ˚C
ZANT= 50 Ω || 18 nH
ZRX =
50 Ω
ZTX =
50 Ω
Characterisitcs TX - RX
min.
typ.
@ 25 ˚C
max.
48
52
59
59
—
—
α
Isolation
746.0
777.0
...
...
756.0
787.0
MHz
MHz
Maximum ratings
Storage temperature range
DC voltage
ESD voltage
Input power at Tx Port
779.5 ... 784.5 MHz
Elsewhere
1)
Tstg
VDC
VESD
PIN
PIN
–40/+85
5
1001)
28
10
˚C
V
V
dBm
machine model, 1 pulse
}
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
5
January 24, 2011
LTE uplink signal
55 ˚C, 50000 H
dB
dB
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
Frequency Response TX-ANT
Frequency Response TX-ANT
Please read cautions and warnings and
important notes at the end of this document.
6
January 24, 2011
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
Frequency Response ANT-RX
Frequency Response ANT-RX
Please read cautions and warnings and
important notes at the end of this document.
7
January 24, 2011
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
ISOLATION TX-RX
ISOLATION TX-RX
Please read cautions and warnings and
important notes at the end of this document.
8
January 24, 2011
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
S11 VSWR (TX)
S22 VSWR (ANT)
S33 VSWR (RX)
Please read cautions and warnings and
important notes at the end of this document.
9
January 24, 2011
SAW Components
B7678
782.0 / 752.0 MHz
SAW Duplexer
DataSheet
References
Type
B7678
Ordering code
B39781B7678A710
Marking and package
C61157-A3-A61
Packaging
F61074-V8153-Z000
Date codes
L_1126
B7678_NB.s3p
S-parameters
B7678_WB.s3p
See file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2011. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
10
January 24, 2011
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products
for certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned.
We nevertheless expressly point out that such statements cannot be regarded as
binding statements about the suitability of our products for a particular customer
application. As a rule, EPCOS is either unfamiliar with individual customer applications or
less familiar with them than the customers themselves. For these reasons, it is always
ultimately incumbent on the customer to check and decide whether an EPCOS product with
the properties described in the product specification is suitable for use in a particular
customer application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions
(e.g. because they are classed as hazardous). Useful information on this will be found in
our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any
more detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in
this publication may change from time to time. The same is true of the corresponding
product specifications. Please check therefore to what extent product descriptions and
specifications contained in this publication are still applicable before or when you place an
order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap,
SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are
trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
11
January 24, 2011
Similar pages