BOARDCOM BCM430X Sentry 5 product line: secured switch processor Datasheet

BCM5365/BCM5365P
®
SENTRY 5 PRODUCT LINE: BCM5365/BCM5365P SECURED SWITCH PROCESSORS
FEATURES
SUMMARY OF BENEFITS
• The most highly integrated access security processors
• 5-port 10/100 Ethernet switch with integrated PHY (TX/FX)
• System-on-a-chip solution offers optimal price/performance
• IEEE 802.1Q (VLAN) support; IEEE 802.1P (4 Priority Queues
- CoS, QoS), DiffServ, ToS support; IEEE 802.1D (Spanning
Tree) support
• 802.1X protocols, IP multicast, IGMP snooping for video
streaming applications, broadcast suppression, and hosting of
multiple subnets
• 128-KB on-chip packet buffer
• Complete on-chip IPSec processing
• Supports AES, DES, 3DES, HMAC-SHA1, HMAC-MD5,
SHA-1, MD5
• 75-Mbps AES/3DES/HMAC-SHA1
• Single-pass encryption and authentication
• General purpose 200-MHz MIPS32™ Processor·
• 8 KB of instruction cache, 4 KB of data cache
• Supports Linux®, and VxWorks® operating systems
• BCM5365P supports PCI 2.2, 32-bit/33-MHz host/slave
interface
• Supports four additional PCI devices in host mode
• Extensive interface flexibility
• Interface to flash memory (up to 32 MB)
• Interface to SDRAM/DDRAM (up to 512 MB, 100 MHz)
• GPIO, USB, UART interface
• JTAG/EJTAG support
ratio and form factor, low power dissipation, and fastest time
to market
• Integration of managed five-port Fast Ethernet switch
• Integration of MIPS32 CPU with silicon-proven IPSec
processor facilitates complete packet processing in one pass for
multiple policy-based packet routing and/or packet
transformations (firewall, NAT, VPN, QoS)
• Enables advanced application development with industrystandard operating systems/platforms/tools
• Widely proliferated high-performance MIPS32 CPU enables
advanced application development with industry-standard
operating systems/platforms/tools
• Extensive application software offered
• IPSec (VPN), PPTP (passthrough), PPPoE client
• NAT, filtering (IP, TCP), dynamic firewall, DMZ
• Ethernet routing, static routing, DHCP server/client
• Compatible with other Broadcom devices, enabling optimal
system-level form factor, costs, and power dissipation
• 400-pin PBGA package
• Low power, 1.8V core, 3.3V I/O operation
• Linux Open Source application software support
• Third-party software support
BCM5365/5365P-Based System Applications
BCM5365-Based Wired Home Router
BCM5365P-Based Wireless Router
SDRAM (Up to 512 MB)
BCM5365
Magnetics Magnetics Magnetics Magnetics
RJ-45
RJ-45
RJ-45
RJ-45
Magnetics
RJ-45
TX/RX
Wireless MAC
BCM2050
BCM430X
PCI
BCM5365P
BCM5365
Clock (25 MHz)
Magnetics Magnetics Magnetics Magnetics
RJ-45
RJ-45
RJ-45
RJ-45
4-Port 10/100 LAN
DMZ
4-Port 10/100 LAN
10/100 WAN
FLASH (Up to 64 MB)
BCM5365
FLASH (2 MB)
Clock (25 MHz)
SDRAM(32MB)
Magnetics
RJ-45
10/100 WAN
OVERVIEW
SDRAM I/F
USB
GPIO
UART
On-Chip Bus
FLASH
I/F
(32-Bit/33-MHz)
4-KB D-CACHE
On-Chip Bus
PCI 2.2
Host
On-Chip Bus
8-KB I-CACHE
200-MHz
MIPS32
Core
VPN
Processor
MMU
Symmetric Key
Engine
75 Mbps
On-Chip Bus
Ethernet MAC/MII
Ethernet
Switch
Controller
4-Port 10/100
LAN PHY
10/100
WAN PHY
128-KB
Packet Buffer
Note: PCI Interface Supported in 5365P Only
Broadcom's BCM5365 and BCM5365P, two System-On-Chips, are the
most highly integrated access secure switch processor there are. The
BCM5365/BCM5365P also features an on-chip, five-port 10/100
Ethernet switch with management features. This secured switch
processor also offers extensive processor and interface integration
featuring an integrated 200-MHz MIPS32™ core, UART, flash and
SDRAM/DDRAM interfaces. The BCM5365P also supports a PCI
interface. The BCM5365/BCM5365P (via dedicated cores) supports a
wide range of cryptographic algorithms: AES (up to 256-bit CTR and
CBC modes), DES, 3DES (CBC), HMAC-SHA1, HMAC-MD5, SHA1
and MD5. Both the devices support IPSec encryption and authentication
in a single pass.
The integrated 200-MHz MIPS32™ core of the BCM5365/BCM5365P
has a 2-way set-associative 8-KB instruction cache and a 4-KB data
cache The CPU includes the MMU, which enables support for various
RTOS.
The BCM5365/BCM5365P also supports interfaces that enable systemlevel cost savings, a better form factor, and lower power dissipation. The
BCM5365/BCM5365P supports up to 512 MB of SDRAM/DDRAM
and 64 MB of flash memory.
The BCM5365P also supports the PCI version 2.2, 32-bit/33-MHz host
interface, allowing enumeration of four external PCI peripherals as a
way to extend system functionality. The UART enables a glueless
interface to serial devices such as modems.
Broadcom provides its proven IPSec API and drivers for integration with
third-party application software. Broadcom also offers application
software to build complete system applications. Application software
support includes functions such as firewall (dynamic firewall, DMZ
hosting, filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers
an d API, PPTP-passthrough , PPPo E client-PAP and CHAP
authentication), QoS/CoS/ToS (static and dynamic Ethernet routing,
VLAN tagging), and many other features.
A single BCM5365/BCM5365P based platform is easy to reuse for
other types of access to market segment equipment ranging in throughput
performance from T1/E1 to 100 Mbps. This equipment includes wireless
and wired home/residential and SOHO firewall and VPN appliances,
wireless access points, and many types of customer premises equipment
(CPE) devices.
Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/
or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the
property of their respective owners.
®
BROADCOM CORPORATION
16215 Alton Parkway, P.O. Box 57013
Irvine, California 92619-7013
© 2004 by BROADCOM CORPORATION. All rights reserved.
5365_5365P-PB01-R 04/01/04
Phone: 949-450-8700
Fax: 949-450-8710
E-mail: [email protected]
Web: www.broadcom.com
Similar pages