Sound processor for radio cassette recorder and mini component stereo BD3881FV/BD3882FV Description The BD3881FV incorporates a sound controller with built-in EQ for playing and recording of cassette tape recorder. When the tape recorder is not used, the equalizer can be used as an ordinary input selector. The sound controller block is simply composed of 2-band tones and volume. The BD3882FV incorporates rear volume for improving SN and 3-band tones. The BD3882FV has nearly the same pin assignment as the BD3881FV and both can be used in a variety of applications. Dimension (Unit : mm) BD3881FV 10.0 ± 0.2 Applied voltage Power dissipation Operating temperature range BD3881FV BD3882FV Storage temperature range Symbol VDD VEE Limits 5 -5 Pd Topr Tstg ∗1 ∗2 -20 ~ +75 -55 ~ +125 0.3Min. 7.6 ± 0.3 5.6 ± 0.2 1.15 ± 0.1 0.1 0.65 0.15 ± 0.1 0.1 0.22 ± 0.1 21 1 20 0.1 0.3Min. 7.8 ± 0.3 5.4 ± 0.2 40 0.65 V mW ˚C ˚C Operating Conditions (Ta=25˚C) Symbol Min. Typ. Max. Unit Operating voltage range VDD 3.5 - 4.75 V Operating voltage range VEE -4.75 - -3.5 V 0.15 ± 0.1 0.1 0.22 ± 0.1 SSOP-B40 ∗1 Derating : 8.5mW/˚C for operation above Ta=25˚C ∗2 Derating : 9.0mW/˚C for operation above Ta=25˚C ∗PCB (70mmx70mm, t=1.6mm) glass epoxy mounting. Parameter 14 13.6 ± 0.2 Unit 850 900 1 BD3882FV Applications CD radio cassette recorder, Mini component stereo, Micro component stereo Parameter 15 SSOP-B28 1.8 ± 0.1 Features 1) Built-in EQ for recording and playing of cassette tape recorder 2) Suitable for karaoke (soft) 3) Enable to design boards easily for set series due to the same pin assignment of BD3881FV and BD3882FV 4) Low noise, low distortion and low power consumption Absolute Maximum Ratings (Ta=25˚C) 28 0.08 M Electrical characteristics (Unless otherwise noted; Ta=25˚C, VDD=4.5V, VEE=-4.5V, f=1kHz, Vin=50mVrms, Rg=600Ω, RL=10kΩ, Input selector=Ach, Volume=0dB, Bass=0dB, Treble=0dB) Parameter Symbol Min. Typ. Max. VDD circuit current at no signal IQVDD - 3.0(4.5) 8.0(10.0) VEE circuit current at no signal IQVEE -8.0(-10.0) -3.0(-4.5) Unit - Conditions mA VIn=0Vrms BPF=400-30kHz Total harmonic distortion rate THD - 0.02(0.01) 0.1 % Output noise voltage Vno - 12(22) 20(60) µVrms (BPF=IHF-A), Rg=0Ω Residual noise voltage Vmno - 12(3) 20(8) µVrms (BPF=IHF-A), Rg=0Ω Bass control range Gbcr +18(±11) +21(±14) +24(±17) dB Vin=5mVrms, (Vin=10mVrms) Treble control range Gtcr +12(±11) +14(±14) +16(±17) dB (Vin=10mVrms), TREBLE=±14dB Middle control range Gmcr (±11) (±14) (±17) dB Vin=10mVrms, MIDDLE=±14dB ( ) is a characteristic of BD3882FV. ∗Phase relation between I/O signal terminals is the same phase. ∗This product is not designed for protection against radioactive rays. Application Circuit (BD3881FV/BD3882FV) BD3882FV BD3881FV 85k 85k 85k 85k REC1O 0.01µ 390p 1k 1.8k 2.2k 0.01µ TUNER 10k 6800p 0.01µ 390p 2.7k 1k 10k REC2O REC1O REC2O 6800p OUT1 MD/AUX CD OUT2 2.2k 390p 0.01µ 390p 1k 2.2k 2.2k TUNER 1k 2.2k 1.8k 2.7k 10k 10k 2.2k MD/AUX CD 2.2k 4.7k 2.2k 1.8k 1.8k 2.2k 2.2k 180p 180p 10k 6800p 28 27 10k 10k 10k 10k 2.2k 180p 10k 0.22µ 26 25 24 23 REC1O REC1N REC2N REC2O INC2 + 22 INC1 21 INB2 20 19 INA2 INB1 18 INA1 0.22µ 17 OUT1 0.22µ 16 BAS1 40 OUT2 BAS2 10k 6800p 0.22µ 15 2.2k 39 10k 10k 10k 4.7µ 10k OUT2 180p 36 37 35 + 34 INC1 33 INB2 32 INA2 INB1 31 30 28 27 INA1 4.7k 29 26 0.22µ 25 0.22µ 24 0.22µ 23 + - + - 20k REAR VOLUME 9.3k TREBLE fc=10kHz + - Logic Control TREBLE fc=10kHz VOLUME PB1N PB1P 2 PB2P 3 PB2O 5 PB1O 6 VOLIN1 VOLIN2 GND 7 8 9 TRE1 10 TRE2 VDD 11 3300p 2.2µ 12 CONT VEE 13 PB1N PB1P 14 1 3300p 2 PB2P 3 PB2N FGND PB2O PB1O VOLIN1 VOLIN2 MGND TRE11 TRE12 TRE21 TRE22 MID21 MID22 VDD 4 5 6 7 47p 6800p 1.2k 47p 390k 1200p 6800p 56 39k TAPE 1200p 470 39k TAPE 1.2k 10 11 0.001µ 12 0.001µ 18k 470p 13 0.001µ 14 0.001µ 15 0.01µ 16 17 SI 18 SC 19 VEE 20 0.01µ 390k 5.6k 56 470p 470 10µ 9 2.2µ 47p 390k 18k 56 8 2.2µ 2.2µ 47p Logic Control MIDDLE fo=1kHz TREBLE fo=10kHz FRONT VOLUME 9.3k PB2N 4 TREBLE fo=10kHz FRONT VOLUME 20k 9.3k 1 BASS fo=55Hz 20k 18dB 18dB MIDDLE fo=1kHz REAR VOLUME + - VOLUME 0.01µ 21 RVFIL2 RVFIL1 OUT1 OUT2 BAS12 BAS11 BAS22 BAS21 MID12 MID11 BASS fo=70Hz 20k 9.3k 0.01µ 22 + BASS fo=55Hz BASS fo=70Hz 5.6k 4.7µ 0.22µ 38 REC1O REC1N REC2N REC2O INC2 + 10k OUT1 6800p 1200p 56 39k TAPE 10µ 1200p 5.6k 390k 470 10µ 5.6k 470p 18k 1.2k 470 6800p 1.2k 18k 470p 10µ 39k TAPE ∗If necessary, please add a coupling capacitor. Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0