PHILIPS BFU730F Npn wideband silicon germanium rf transistor Datasheet

BFU730F
NPN wideband silicon germanium RF transistor
Rev. 1 — 29 April 2011
Product data sheet
1. Product profile
1.1 General description
NPN silicon germanium microwave transistor for high speed, low noise applications in a
plastic, 4-pin dual-emitter SOT343F package.
CAUTION
This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling
electrostatic sensitive devices.
Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or
equivalent standards.
1.2 Features and benefits
„
„
„
„
Low noise high gain microwave transistor
Noise figure (NF) = 0.8 dB at 5.8 GHz
High maximum power gain 18.5 dB at 5.8 GHz
110 GHz fT silicon germanium technology
1.3 Applications
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
2nd LNA stage and mixer stage in DBS LNB’s
Low noise amplifiers for microwave communications systems
Ka band oscillators DRO’s
Low current battery equipped applications
Microwave driver / buffer applications
Wi-Fi / WLAN / WiMAX
GPS
RKE
AMR
ZigBee
LTE, cellular, UMTS
SDARS first stage LNA
FM radio
Mobile TV
Bluetooth
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
1.4 Quick reference data
Table 1.
Quick reference data
Symbol Parameter
Conditions
Min
Typ
Max
Unit
VCBO
collector-base voltage
open emitter
-
-
10
V
VCEO
collector-emitter voltage
open base
-
-
2.8
V
VEBO
emitter-base voltage
open collector
-
-
1.0
V
IC
collector current
-
5
30
mA
-
-
197
mW
Ptot
total power dissipation
Tsp ≤ 90 °C
hFE
DC current gain
IC = 2 mA; VCE = 2 V;
Tj = 25 °C
205
380
555
CCBS
collector-base
capacitance
VCB = 2 V; f = 1 MHz
-
55
-
fF
fT
transition frequency
IC = 25 mA; VCE = 2 V;
f = 2 GHz; Tamb = 25 °C
-
55
-
GHz
Gp(max)
maximum power gain
IC = 17 mA; VCE = 2 V;
f = 12 GHz; Tamb = 25 °C
-
12.5
-
dB
NF
noise figure
IC = 5 mA; VCE = 2 V;
f = 12 GHz; ΓS = Γopt
-
1.30
-
dB
PL(1dB)
output power at 1 dB
gain compression
IC = 15 mA; VCE = 2.5 V;
ZS = ZL = 50 Ω;
f = 5.8 GHz; Tamb = 25 °C
-
12.5
-
dBm
[1]
[2]
[1]
Tsp is the temperature at the solder point of the emitter lead.
[2]
Gp(max) is the maximum power gain, if K > 1. If K < 1 then Gp(max) = Maximum Stable Gain (MSG).
2. Pinning information
Table 2.
Discrete pinning
Pin
Description
1
emitter
2
base
3
emitter
4
collector
Simplified outline
3
Graphic symbol
4
4
2
1, 3
2
1
mbb159
3. Ordering information
Table 3.
Ordering information
Type number
BFU730F
BFU730F
Product data sheet
Package
Name
Description
Version
-
plastic surface-mounted flat pack package; reverse
pinning; 4 leads
SOT343F
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
2 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
4. Marking
Table 4.
Marking
Type number
Marking
Description
BFU730F
D6*
* = p : made in Hong Kong
* = t : made in Malaysia
* = w : made in China
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
Conditions
Min
Max
Unit
VCBO
collector-base voltage
open emitter
-
10
V
VCEO
collector-emitter voltage
open base
-
2.8
V
VEBO
emitter-base voltage
open collector
-
1.0
V
IC
collector current
-
30
mA
-
197
mW
Tsp ≤ 90 °C
[1]
Ptot
total power dissipation
Tstg
storage temperature
−65
+150
°C
Tj
junction temperature
-
150
°C
[1]
Tsp is the temperature at the solder point of the emitter lead.
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Rth(j-sp)
thermal resistance from junction to solder point
Conditions
Typ
Unit
304
K/W
001aam852
250
Ptot
(mW)
200
150
100
50
0
0
40
80
120
160
Tsp (°C)
Fig 1.
BFU730F
Product data sheet
Power derating curve
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
3 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
7. Characteristics
Table 7.
Characteristics
Tj = 25 °C unless otherwise specified
Symbol
Parameter
Conditions
Min Typ
Max Unit
V(BR)CBO collector-base breakdown voltage
IC = 2.5 μA; IE = 0 mA
10
-
V
V(BR)CEO collector-emitter breakdown voltage
IC = 1 mA; IB = 0 mA
-
2.8
-
-
V
-
5
30
mA
IE = 0 mA; VCB = 4.5 V
-
-
100
nA
DC current gain
IC = 2 mA; VCE = 2 V
205 380
555
IC
collector current
ICBO
collector-base cut-off current
hFE
CCES
collector-emitter capacitance
VCB = 2 V; f = 1 MHz
-
206
-
fF
CEBS
emitter-base capacitance
VEB = 0.5 V; f = 1 MHz
-
442
-
fF
CCBS
collector-base capacitance
VCB = 2 V; f = 1 MHz
-
55
-
fF
fT
transition frequency
IC = 25 mA; VCE = 2 V; f = 2 GHz;
Tamb = 25 °C
-
55
-
GHz
Gp(max)
maximum power gain
IC = 17 mA; VCE = 2 V; Tamb = 25 °C
f = 1.5 GHz
-
29
-
dB
f = 1.8 GHz
-
28
-
dB
f = 2.4 GHz
-
26.5
-
dB
f = 5.8 GHz
-
18.5
-
dB
f = 12 GHz
-
12.5
-
dB
f = 1.5 GHz
-
27
-
dB
f = 1.8 GHz
-
25.5
-
dB
f = 2.4 GHz
-
23.5
-
dB
f = 5.8 GHz
-
16
-
dB
f = 12 GHz
-
10.5
-
dB
f = 1.5 GHz
-
0.50
-
dB
f = 1.8 GHz
-
0.50
-
dB
f = 2.4 GHz
-
0.55
-
dB
f = 5.8 GHz
-
0.80
-
dB
f = 12 GHz
-
1.30
-
dB
f = 1.5 GHz
-
25.0
-
dB
f = 1.8 GHz
-
23.5
-
dB
f = 2.4 GHz
-
21.5
-
dB
f = 5.8 GHz
-
15.0
-
dB
f = 12 GHz
-
11.0
-
dB
|s21|2
NF
Gass
insertion power gain
noise figure
associated gain
BFU730F
Product data sheet
[1]
IC = 17 mA; VCE = 2 V; Tamb = 25 °C
IC = 5 mA; VCE = 2 V; ΓS = Γopt;
Tamb = 25 °C
IC = 5 mA; VCE = 2 V; ΓS = Γopt;
Tamb = 25 °C
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
4 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
Table 7.
Characteristics …continued
Tj = 25 °C unless otherwise specified
Symbol
Parameter
Conditions
PL(1dB)
output power at 1 dB gain compression
IC = 15 mA; VCE = 2.5 V;
ZS = ZL = 50 Ω; Tamb = 25 °C
IP3
[1]
Min Typ
Max Unit
f = 1.5 GHz
-
12.5
-
dBm
f = 1.8 GHz
-
12
-
dBm
f = 2.4 GHz
-
11.5
-
dBm
f = 5.8 GHz
-
12.5
-
dBm
f = 1.5 GHz
-
26.5
-
dBm
f = 1.8 GHz
-
26.5
-
dBm
f = 2.4 GHz
-
26.5
-
dBm
f = 5.8 GHz
-
29
-
dBm
IC = 20 mA; VCE = 2.5 V;
ZS = ZL = 50 Ω; Tamb = 25 °C
third-order intercept point
Gp(max) is the maximum power gain, if K > 1. If K < 1 then Gp(max) = MSG.
001aam853
30
(1)
IC
(mA)
001aam854
500
hFE
(2)
400
(3)
(4)
20
(5)
300
(6)
(7)
200
(8)
10
(9)
100
(10)
0
0
0
1
2
3
0
10
VCE (V)
20
30
IC (mA)
Tamb = 25 °C.
VCE = 2 V; Tamb = 25 °C.
(1) IB = 100 μA
(2) IB = 90 μA
(3) IB = 80 μA
(4) IB = 70 μA
(5) IB = 60 μA
(6) IB = 50 μA
(7) IB = 40 μA
(8) IB = 30 μA
(9) IB = 20 μA
(10) IB = 10 μA
Fig 2.
Collector current as a function of
collector-emitter voltage; typical values
BFU730F
Product data sheet
Fig 3.
DC current gain as a function of collector
current; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
5 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
001aam855
80
001aam856
60
CCBS
(fF)
fT
(GHz)
60
40
40
20
20
0
0
0
1
2
3
4
0
10
20
30
40
VCB (V)
f = 1 MHz, Tamb = 25 °C.
Fig 4.
50
IC (mA)
VCE = 2 V; f = 2 GHz; Tamb = 25 °C.
Collector-base capacitance as a function of
collector-base voltage; typical values
Fig 5.
Transition frequency as a function of collector
current; typical values
001aam857
30
(1)
G
(dB)
(2)
MSG
(3)
20
Gp(max)
(4)
(5)
10
0
0
10
20
30
40
50
IC (mA)
VCE = 2 V; Tamb = 25 °C.
(1) f = 1.5 GHz
(2) f = 1.8 GHz
(3) f = 2.4 GHz
(4) f = 5.8 GHz
(5) f = 12 GHz
Fig 6.
Gain as a function of collector current; typical value
BFU730F
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
6 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
001aam858
50
001aam859
50
G
(dB)
G
(dB)
40
40
30
30
MSG
20
MSG
20
Gp(max)
IS21I2
Gp(max)
IS21I2
10
MSG
10
MSG
0
0
0
5
10
15
20
25
0
5
10
15
20
f (GHz)
VCE = 2 V; IC = 5 mA; Tamb = 25 °C.
Fig 7.
VCE = 2 V; IC = 17 mA; Tamb = 25 °C.
Gain as a function of frequency; typical values
001aam860
2.0
25
f (GHz)
Fig 8.
Gain as a function of frequency; typical values
001aam861
2.0
NFmin
(dB)
NFmin
(dB)
1.5
(1)
1.5
1.0
(2)
1.0
(3)
(4)
(5)
0.5
0.5
0
0
0
5
10
15
0
2
4
6
8
10
12
f (GHz)
IC (mA)
VCE = 2 V; Tamb = 25 °C.
14
IC = 5 mA; VCE = 2 V; Tamb = 25 °C.
(1) f = 12 GHz
(2) f = 5.8 GHz
(3) f = 2.4 GHz
(4) f = 1.8 GHz
(5) f = 1.5 GHz
Fig 9.
Minimum noise figure as a function of
collector current; typical values
BFU730F
Product data sheet
Fig 10. Minimum noise figure as a function of
frequency; typical values
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
7 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
8. Package outline
Plastic surface-mounted flat pack package; reverse pinning; 4 leads
D
SOT343F
E
A
y
X
HE
e
3
4
A
c
2
w
M
A
Lp
1
bp
b1
w
A
M
detail X
e1
0
1
2 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max
bp
b1
c
D
E
e
e1
HE
Lp
w
y
mm
0.75
0.65
0.4
0.3
0.7
0.5
0.25
0.10
2.2
1.8
1.35
1.15
1.3
1.15
2.2
2.0
0.48
0.38
0.2
0.1
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
05-07-12
06-03-16
SOT343F
Fig 11. Package outline SOT343F
BFU730F
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
8 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
9. Abbreviations
Table 8.
Abbreviations
Acronym
Description
AMR
Automatic Meter Reading
DBS
Direct Broadcast Satellite
DC
Direct Current
DRO
Dielectric Resonator Oscillator
FM
Frequency Modulation
GPS
Global Positioning System
Ka
Kurtz above
LNA
Low Noise Amplifier
LNB
Low Noise Block
LTE
Long Term Evolution
NPN
Negative-Positive-Negative
RF
Radio Frequency
RKE
Remote Keyless Entry
SDARS
Satellite Digital Audio Radio Service
UMTS
Universal Mobile Telecommunications System
WiMAX
Worldwide Interoperability for Microwave Access
WLAN
Wireless Local Area Network
10. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BFU730F v.1
20110429
Product data sheet
-
-
BFU730F
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
9 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
11. Legal information
11.1
Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
11.2
Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
11.3
Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
BFU730F
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
10 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
11.4
Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BFU730F
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 29 April 2011
© NXP B.V. 2011. All rights reserved.
11 of 12
BFU730F
NXP Semiconductors
NPN wideband silicon germanium RF transistor
13. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
11.1
11.2
11.3
11.4
12
13
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9
Legal information. . . . . . . . . . . . . . . . . . . . . . . 10
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Contact information. . . . . . . . . . . . . . . . . . . . . 11
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2011.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 29 April 2011
Document identifier: BFU730F
Similar pages