PHILIPS BH162244DGG 16-bit buffer/line driver with 30ohm series termination resistors 3-state Datasheet

INTEGRATED CIRCUITS
74ABT162244
74ABTH162244
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
Product specification
Supersedes data of 1998 Feb 25
IC23 Data Handbook
1998 Oct 22
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
FEATURES
74ABT162244
74ABTH162244
PIN CONFIGURATION
• 16-bit bus interface
• Multiple VCC and GND pins minimize switching noise
• Power-up 3-State
• 3-State buffers
• Output capability: +12 mA/–32mA
• Live insertion/extraction permitted
• Latch-up protection exceeds 500mA per JEDEC Std 17
• ESD protection exceeds 2000 V per MIL STD 883 Method 3015
and 200 V per Machine Model
• Same part as 74ABT162244-1
• 74ABTH162244 incorporates bus hold data inputs which eliminate
the need for external pull–up resistors to hold unused inputs
• Bus-hold data inputs eliminate the need for external pull-up
resistors to hold unused inputs
DESCRIPTION
The 74ABT162244 high-performance BiCMOS device combines
low static and dynamic power dissipation with high speed.
The 74ABT162244 device is a 16-bit buffer that is ideal for driving
bus lines. The device features four Output Enables (1OE, 2OE,
3OE, 4OE), each controlling four of the 3-State outputs.
The 74ABT162244 is designed with 30Ω series resistance in both
the upper and lower output structures. This design reduces line
noise in applications such as memory address drivers, clock drivers
and bus receivers/transmitters.
1OE
1
48
2OE
1Y0
2
47
1A0
1Y1
3
46
1A1
GND
4
45
GND
1Y2
5
44
1A2
1Y3
6
43
1A3
VCC
7
42
VCC
2Y0
8
41
2A0
2Y1
9
40
2A1
GND
10
39
GND
2Y2
11
38
2A2
2Y3
12
37
2A3
3Y0
13
36
3A0
3Y1
14
35
3A1
GND
15
34
GND
3Y2
16
33
3A2
3Y4
17
32
3A3
VCC
18
31
VCC
4Y0
19
30
4A0
4Y1
20
29
4A1
GND
21
28
GND
4Y2
22
27
4A2
4Y3
23
26
4A3
4OE
24
25
3OE
SA00013
The 74ABT162244 is the same as the 74ABT16244-1. The part
number has been changed to reflect industry standards.
Two options are available, 74ABT162244 which does not have the
bus hold feature and the 74ABTH162244 which incorporates the bus
hold feature.
QUICK REFERENCE DATA
SYMBOL
CONDITIONS
Tamb = 25°C; GND = 0V
PARAMETER
TYPICAL
UNIT
1.8
3.2
ns
tPLH
tPHL
Propagation delay
nAx to nYx
CL = 50pF; VCC = 5V
CIN
Input capacitance
VI = 0V or VCC
3
pF
Output capacitance
VO = 0V or VCC; 3-State
7
pF
Outputs disabled; VCC = 5.5V
500
µA
Outputs Low; VCC = 5.5V
10
mA
COUT
ICCZ
Quiescent supply current
ICCL
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
OUTSIDE NORTH AMERICA
NORTH AMERICA
DWG NUMBER
48-Pin Plastic SSOP Type III
–40°C to +85°C
74ABT162244 DL
BT162244 DL
SOT370-1
48-Pin Plastic TSSOP Type II
–40°C to +85°C
74ABT162244 DGG
BT162244 DGG
SOT362-1
48-Pin Plastic SSOP Type III
–40°C to +85°C
74ABTH162244 DL
BH162244 DL
SOT370-1
48-Pin Plastic TSSOP Type II
–40°C to +85°C
74ABTH162244 DGG
BH162244 DGG
SOT362-1
1998 Oct 22
2
853-1773 20224
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
LOGIC SYMBOL
47
46
44
43
1A0
LOGIC SYMBOL (IEEE/IEC)
1Y0
1A1
2
1Y1
1A2
1Y2
1A3
1Y3
36
3
35
5
33
6
32
3A0
3Y0
3A1
3Y1
3A2
3Y2
3A3
3Y3
13
14
16
1OE
1
EN1
2OE
48
EN2
3OE
25
EN3
4OE
24
EN4
1A0
17
1A1
1
41
1OE
25
2A0
2Y0
30
8
3OE
1A2
4A0
4Y0
1A3
19
2A0
40
38
37
48
2A1
2Y1
2A2
2Y2
2Y3
2A3
29
9
11
27
12
26
2OE
24
4A1
4Y1
4Y2
4A2
4Y3
4A3
20
2A1
2A2
22
2A3
3A0
23
3A1
4OE
3A2
3A3
SA00014
4A0
FUNCTION TABLE
4A1
4A2
INPUTS
H
L
X
Z
OUTPUTS
nOE
nAx
nYx
L
L
L
L
H
H
H
X
Z
4A3
47
2
1Y0
46
3
1Y1
44
5
1Y2
43
6
1Y3
41
8
2Y0
1
1
1∇
2∇
40
9
38
11
2Y2
37
12
2Y3
36
13
3Y0
35
14
3Y1
33
16
3Y2
32
17
3Y3
30
19
4Y0
29
20
4Y1
27
22
4Y2
26
23
1
1
3∇
4∇
2Y1
4Y3
SH00089
PIN DESCRIPTION
= High voltage level
= Low voltage level
= Don’t care
= High impedance “off” state
SCHEMATIC OF Y OUTPUTS
VCC
PIN NUMBER
SYMBOL
47, 46, 44, 43
41, 40, 38, 37
36, 35, 33, 32
30, 29, 27, 26
1A0 – 1A3,
2A0 – 2A3,
3A0 – 3A3,
4A0 – 4A3
NAME AND FUNCTION
Data inputs
2, 3, 5, 6
8, 9, 11, 12
13, 14, 16, 17
19, 20, 22, 23
1Y0 – 1Y3,
2Y0 – 2Y3,
3Y0 – 3Y3,
4Y0 – 4Y3
Data outputs
1, 48
25, 24
1OE, 2OE,
3OE, 4OE
Output enables
4, 10, 15, 21
28, 34, 39, 45
GND
Ground (0V)
7, 18, 31, 42
VCC
Positive supply voltage
27Ω
OUTPUT
27Ω
GND
SA00042
1998 Oct 22
3
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
ABSOLUTE MAXIMUM RATINGS1, 2
PARAMETER
SYMBOL
VCC
IIK
CONDITIONS
RATING
UNIT
–0.5 to +7.0
V
–18
mA
–1.2 to +7.0
V
VO < 0
–50
mA
output in Off or High state
–0.5 to +5.5
V
output in Low state
128
output in High state
–64
DC supply voltage
DC input diode current
VI < 0
voltage3
VI
DC input
IOK
DC output diode current
voltage3
VOUT
DC output
IOUT
O
DC output current
Tstg
Storage temperature range
mA
°C
–65 to 150
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
LIMITS
SYMBOL
VCC
PARAMETER
UNIT
DC supply voltage
VI
Input voltage
VIH
High-level input voltage
Min
Max
4.5
5.5
V
0
VCC
V
2.0
V
VIL
Low-level input voltage
0.8
V
IOH
High-level output current
–32
mA
IOL
Low-level output current
12
mA
0
10
ns/V
–40
+85
°C
∆t/∆v
Input transition rise or fall rate
Tamb
Operating free-air temperature range
1998 Oct 22
4
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
DC ELECTRICAL CHARACTERISTICS
LIMITS
SYMBOL
PARAMETER
TEST CONDITIONS
Min
VIK
VOH
VOL
O
II
Input clamp voltage
High-level output
voltage3
Low level output voltage
Low-level
Input leakage current
VCC = 4.5V; IIK = –18mA
II
Bus Hold
B
H ld Current
C
t A Inputs
I
t 4
74ABTH162244
Max
–0.9
–1.2
Min
Max
–1.2
V
2.5
2.9
2.5
V
VCC = 5V; IOH = –3mA; VI = VIL or VIH
3.0
3.4
3.0
V
VCC = 4.5V; IOH = –32mA; VI = VIL or VIH
2.0
2.4
2.0
V
VCC = 4.5V; IOL = 8mA; VI = VIL or VIH
0.65
0.65
V
VCC = 4.5V; IOL = 12mA; VI = VIL or VIH
0.80
0.80
V
±0.01
±1.0
±1.0
µA
±0.01
±1.0
±1.0
µA
0.01
1.0
1.0
µA
–2.0
–3.0
–5.0
µA
VCC = 5.5V; VI = GND or 5.5V
VCC = 5.5V; VI = VCC
Control
pins
Data pins
VCC = 5.5V; VI = 0
IHOLD
Typ
UNIT
VCC = 4.5V; IOH = –3mA; VI = VIL or VIH
VCC = 5.5V; VI = VCC or GND
Input
In
ut leakage current
74ABTH162244
Tamb = –40°C
to +85°C
Tamb = +25°C
VCC = 4.5V; VI = 0.8V
50
50
VCC = 5.5V; VI = 2.0V
–75
–75
VCC = 5.5V; VI = 0 to 5.5V
±500
µA
Power-off leakage current
VCC = 0.0V; VO or VI ≤ 4.5V
±5.0
±100
±100
µA
Power-up/down 3-State
output current
VCC = 2.0V; VO = 0.5V; VI = GND or VCC;
V OE = Don’t care
±5.0
±50
±50
µA
IOZH
3-State output High current
VCC = 5.5V; VO = 5.5V; VI = VIL or VIH
0.1
10
10
µA
IOZL
3-State output Low current
VCC = 5.5V; VO = 0.0V; VI = VIL or VIH
–0.1
–10
–10
µA
ICEX
Output High leakage current
VCC = 5.5V; VO = 5.5V; VI = GND or VCC
5.0
50
50
µA
–100
–180
–180
mA
VCC = 5.5V; Outputs High, VI = GND or VCC
0.50
1.0
1.0
mA
VCC = 5.5V; Outputs Low, VI = GND or VCC
IOFF
IPU/PD
IO
Output
current1
VCC = 5.5V; VO = 2.5V
ICCH
ICCL
Quiescent supply
current3
ICCZ
∆ICC
Additional supply current per
in
ut pin
in2, 3
input
–50
10
19
19
mA
VCC = 5.5V; Outputs 3-State;
VI = GND or VCC
0.50
1.0
1.0
mA
Outputs enabled, one data input at 3.4V,
other inputs at VCC or GND; VCC = 5.5V
100
250
250
µA
Outputs disabled, one data input at 3.4V,
other inputs at VCC or GND; VCC = 5.5V
100
250
250
µA
Control pins, outputs disabled, one enable
input at 3.4V, other inputs at VCC or GND;
VCC = 5.5V
100
250
250
µA
NOTES:
1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
2. This is the increase in supply current for each input at 3.4V.
3. This data sheet limit may vary among suppliers.
4. This is the bus hold overdrive current required to force the input to the opposite logic state.
1998 Oct 22
–50
5
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
AC CHARACTERISTICS
GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω
LIMITS
SYMBOL
PARAMETER
Tamb = +25°C
VCC = +5.0V
WAVEFORM
Tamb = –40°C to +85°C
VCC = +5.0V ±0.5V
Min
Typ
Max
Min
Max
UNIT
tPLH
tPHL
Propagation delay
nAx to nYx
1
1.0
1.6
1.8
3.2
2.4
4.0
1.0
1.6
2.7
4.4
ns
tPZH
tPZL
Output enable time
to High and Low level
2
1.2
2.6
2.7
5.0
3.5
6.2
1.2
2.6
4.3
7.3
ns
tPHZ
tPLZ
Output disable time
from High and Low level
2
1.5
1.3
3.0
2.6
3.8
3.3
1.5
1.3
4.5
4.6
ns
AC WAVEFORMS
VM = 1.5V, VIN = GND to 3.0V
nOE INPUT
3.0V or VCC
whichever
is less
nAx INPUT
VM
VM
VM
VM
tPZL
tPLZ
3.5V
0V
tPLH
tPHL
nYx OUTPUT
VM
VOL + 0.3V
VOH
nYx
OUTPUT
VM
VOL
VM
tPHZ
tPZH
VOH
VOL
VOH – 0.3V
nYx OUTPUT
VM
0V
SA00017
SA00016
Waveform 1.
1998 Oct 22
Input (An) to Output (Yn) Propagation Delays
Waveform 2.
6
3-State Output Enable and Disable Times
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
TEST CIRCUIT AND WAVEFORMS
VCC
7.0V
PULSE
GENERATOR
VOUT
VIN
tW
90%
VM
NEGATIVE
PULSE
10%
0V
tTLH (tR)
tTHL (tF)
CL
tTLH (tR)
RL
tTHL (tF)
90%
POSITIVE
PULSE
Test Circuit for 3-State Outputs
AMP (V)
90%
VM
VM
10%
10%
tW
SWITCH POSITION
TEST
SWITCH
tPLZ
closed
tPZL
closed
All other
open
0V
VM = 1.5V
Input Pulse Definition
INPUT PULSE REQUIREMENTS
DEFINITIONS
RL = Load resistor; see AC CHARACTERISTICS for value.
CL = Load capacitance includes jig and probe capacitance;
see AC CHARACTERISTICS for value.
RT = Termination resistance should be equal to ZOUT of
pulse generators.
AMP (V)
VM
10%
RL
D.U.T.
RT
90%
FAMILY
74ABT/H16
Amplitude
Rep. Rate
tW
tR
tF
3.0V
1MHz
500ns
2.5ns
2.5ns
SA00018
1998 Oct 22
7
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm
1998 Oct 22
8
SOT370-1
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
TSSOP48: plastic thin shrink small outline package; 48 leads; body width 6.1mm
1998 Oct 22
9
SOT362-1
Philips Semiconductors
Product specification
16-bit buffer/line driver with 30Ω series
termination resistors (3-State)
74ABT162244
74ABTH162244
Data sheet status
Data sheet
status
Product
status
Definition [1]
Objective
specification
Development
This data sheet contains the design target or goal specifications for product development.
Specification may change in any manner without notice.
Preliminary
specification
Qualification
This data sheet contains preliminary data, and supplementary data will be published at a later date.
Philips Semiconductors reserves the right to make chages at any time without notice in order to
improve design and supply the best possible product.
Product
specification
Production
This data sheet contains final specifications. Philips Semiconductors reserves the right to make
changes at any time without notice in order to improve design and supply the best possible product.
[1] Please consult the most recently issued datasheet before initiating or completing a design.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or
at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended
periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips
Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard
cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified.
 Copyright Philips Electronics North America Corporation 1998
All rights reserved. Printed in U.S.A.
Philips Semiconductors
811 East Arques Avenue
P.O. Box 3409
Sunnyvale, California 94088–3409
Telephone 800-234-7381
print code
Document order number:
yyyy mmm dd
10
Date of release: 05-96
9397-750-04708
Similar pages