1N5624GP THRU 1N5627GP GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 200 to 800 Volts FEATURES D * DO-201AD N T E ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 3.0 Ampere operation at TA=70°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. E P A T Forward Current - 3.0 Amperes 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. MECHANICAL DATA Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® Case: JEDEC DO-201AD molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.04 ounce, 1.12 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5624GP 1N5625GP 1N5626GP VRRM 200 400 600 800 Volts * Maximum DC blocking voltage VDC 200 400 600 800 Volts * Maximum average forward rectified current 0.375" (9.5mm) lead lengths at TA=70°C I(AV) 3.0 Amps * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125.0 Amps TA=25°C TA=70°C VF 1.0 0.95 Volts TA=25°C TA=150°C IR * Maximum repetitive peak reverse voltage * Maximum instantaneous forward voltage at 3.0A Maximum reverse current at rated DC blocking voltage Maximum full load reverse current, full cycle average, 0.375" (9.5mm) lead length at TA=70°C Typical reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range 5.0 300.0 200.0 UNITS µA IR(AV) 200.0 µA trr 3.0 µs CJ 40.0 pF RΘJA 20.0 °C/W TJ, TSTG NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted *JEDEC Values 4/98 1N5627GP -65 to +175 °C RATINGS AND CHARACTERISTIC CURVES 1N5624GP THRU 1N5627GP FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 4.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 60 HZ RESISTIVE OR INDUCTIVE LOAD 3.0 2.0 1.0 0.375"(9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 10 175 1 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 100 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60 HZ AMBIENT TEMPERATURE, °C 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 TJ=150°C 1 TJ=100°C 0.1 TJ=25°C 0.01 0 20 40 60 80 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 0.1 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE, VOLTS 100 100