Order this document by MBR2060CT/D SEMICONDUCTOR TECHNICAL DATA . . . using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • • • • • • • • • 20 Amps Total (10 Amps Per Diode Leg) Guard–Ring for Stress Protection Low Forward Voltage 150°C Operating Junction Temperature Guaranteed Reverse Avalanche Epoxy Meets UL94, VO at 1/8″ Low Power Loss/High Efficiency High Surge Capacity Low Stored Charge Majority Carrier Conduction MBR2060CT and MBR20100CT are Motorola Preferred Devices SCHOTTKY BARRIER RECTIFIERS 20 AMPERES 60–100 VOLTS Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds • Shipped 50 units per plastic tube • Marking: B2060, B2070, B2080, B2090, B20100 4 1 1 2 3 2, 4 3 CASE 221A–06 TO–220AB PLASTIC MAXIMUM RATINGS PER DIODE LEG MBR Rating Symbol Unit 2060CT 2070CT 2080CT 2090CT 20100CT 60 70 80 90 100 Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR Volts Average Rectified Forward Current (Rated VR) TC = 133°C IF(AV) 10 Amps Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz) TC = 133°C IFRM 20 Amps Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 150 Amps Peak Repetitive Reverse Surge Current (2.0 µs, 1.0 kHz) IRRM 0.5 Amp Storage Temperature Tstg *65 to +150 *65 to +175 Voltage Rate of Change (Rated VR) dv/dt 10,000 V/µs RθJC RθJA 2.0 60 °C/W Operating Junction Temperature TJ °C °C THERMAL CHARACTERISTICS Maximum Thermal Resistance — Junction to Case — Junction to Ambient SWITCHMODE is a trademark of Motorola, Inc. Preferred devices are Motorola recommended choices for future use and best overall value. Rev 2 Device Rectifier Motorola, Inc. 1996 Data 1 ELECTRICAL CHARACTERISTICS PER DIODE LEG MBR Rating Symbol Unit 2060CT Maximum Instantaneous Forward Voltage (1) (iF = 10 Amps, TC = 125°C) (iF = 10 Amps, TC = 25°C) (iF = 20 Amps, TC = 125°C) (iF = 20 Amps, TC = 25°C) vF Maximum Instantaneous Reverse Current (1) (Rated dc Voltage, TC = 125°C) (Rated dc Voltage, TC = 25°C) iR 2070CT 2080CT 2090CT 20100CT Volts 0.75 0.85 0.85 0.95 mA 6.0 0.1 (1) Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%. 2 Rectifier Device Data 50 TJ = 150°C 20 IR , REVERSE CURRENT (mA) 150°C 10 100°C 175°C 5.0 3.0 TJ = 25°C 1.0 10 125°C 100°C 1.0 0.1 25°C 0.01 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 1.0 0.9 40 60 80 100 120 vF, INSTANTANEOUS VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Per Diode Figure 2. Typical Reverse Current Per Diode 20 RATED VOLTAGE APPLIED RqJC = 2°C/W 18 16 14 12 10 dc 8.0 6.0 SQUARE WAVE 4.0 2.0 0 110 20 0 I F(AV) , AVERAGE FORWARD CURRENT (AMPS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS) 120 130 140 150 140 20 (HEATSINK) RqJA = 16°C/W (NO HEATSINK) RqJA = 60°C/W 18 16 14 12 RATED VOLTAGE APPLIED 10 dc 8.0 6.0 4.0 dc SQUARE WAVE 2.0 0 160 0 60 40 20 80 100 120 140 160 TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 3. Current Derating, Case Figure 4. Current Derating, Ambient 180 200 20 AVERAGE POWER (WATTS) IPK/IAV = 5.0 TA = 25°C 18 IPK/IAV = p 16 IPK/IAV = 10 14 12 dc 10 IPK/IAV = 20 8.0 SQUARE WAVE 6.0 4.0 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 18 20 AVERAGE CURRENT (AMPS) Figure 5. Average Power Dissipation and Average Current Rectifier Device Data 3 PACKAGE DIMENSIONS –T– B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ––– ––– 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ––– ––– 2.04 CASE 221A–06 (TO–220AB) ISSUE Y Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Mfax: [email protected] – TOUCHTONE 1–602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ 4 Rectifier Device Data MBR2060CT/D